LED Circuit Board Indicator 5600F7/5 Equivalent & Substitute Parts

Part Overview

The VCC 5600F7/5 is a dual-color LED circuit board indicator featuring green and yellow light-emitting elements in a 3mm T-1 through-hole right-angle package. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing design support and procurement continuity. The part delivers 30mA nominal current with forward voltages of 2.2V (green) and 2.1V (yellow), suitable for standard logic-level indicator applications.

Substiute Parts

5600F7/5

Visual Communications Company - VCCIn Stock: 10915600F7/5 Datasheet

Current PartRFQ

WP130WDT/GYW

KingbrightIn Stock: 14397WP130WDT/GYW Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 5600F7/5 is determined by the following critical parameters:

Mandatory Matching Criteria:

• Dual-color configuration (Green and Yellow)
• 3mm T-1 package geometry
• Through-hole right-angle mounting orientation
• Forward voltage compatibility: 2.2V Green, 2.1V Yellow
• Diffused lens type
• Round domed-top lens style

Allowable Parameter Variations:

• Current rating: Substitute may differ if circuit design accommodates the variation
• Millicandela output: Substitute may exceed original specification
• Wavelength peak: Minor shifts within standard color bands are acceptable
• Lens tint color: Variations in diffusion characteristics permitted
• Product status: Active parts acceptable for obsolete originals

The Kingbright WP130WDT/GYW meets all mandatory matching criteria while providing enhanced brightness specifications and active product status.

Parameter Comparison

Engineering Selection Recommendations

The Kingbright WP130WDT/GYW is a direct functional substitute for the obsolete VCC 5600F7/5 based on the following engineering criteria:

Compliance & Certification Alignment: Both parts maintain ROHS3 compliance and MSL Level 1 rating, ensuring compatibility with standard manufacturing and storage protocols. The substitute part's active product status provides long-term availability and supply chain stability compared to the obsolete original.

Electrical & Optical Compatibility: Forward voltage specifications are identical across both green and yellow elements, permitting direct circuit integration without redesign. The substitute's enhanced millicandela ratings (40mcd green, 20mcd yellow versus 16mcd and 6.3mcd) represent improved optical performance within the same package envelope. The 25mA green current specification of the substitute is lower than the original 30mA, reducing power dissipation in green-only operation scenarios.

Mechanical & Optical Characteristics: Package geometry, mounting orientation, and lens style are identical. The substitute's white diffusion lens versus the original tinted lens produces slightly different light distribution characteristics but maintains the same 3mm T-1 form factor and right-angle through-hole mounting interface.

Selection Basis: Selection of the WP130WDT/GYW is justified by obsolescence of the original part, matching electrical specifications, identical mechanical compatibility, and maintained regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the Kingbright WP130WDT/GYW replace the VCC 5600F7/5 in existing circuit designs without modification?

A: Yes. Both parts share identical forward voltages (2.2V green, 2.1V yellow), package geometry (3mm T-1), and mounting orientation (through-hole right-angle). The substitute's 25mA green current specification is lower than the original 30mA, which reduces power consumption. Existing current-limiting resistor values will function with the substitute; however, the substitute will produce higher brightness output due to its 40mcd green and 20mcd yellow ratings.

Q: What is the difference between the tinted lens of the original and the white diffusion lens of the substitute?

A: Both are diffused lens types designed for indicator applications. The original's tinted lens and the substitute's white lens produce different light scattering characteristics. The white diffusion lens of the substitute typically provides more uniform light distribution across the viewing angle. Both maintain the same round domed-top geometry and 3mm package size.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts are ROHS3 compliant, carry MSL Level 1 rating, and are classified under the same HTSUS code (8541.41.0000). The substitute's active product status ensures ongoing compliance maintenance and supply availability.

Q: What is the viewing angle specification for the substitute part?

A: The Kingbright WP130WDT/GYW specifies a 60° viewing angle. The original VCC 5600F7/5 does not provide a viewing angle specification in the available documentation.

Q: How does the wavelength difference (585nm yellow original versus 590nm substitute) affect application performance?

A: Both wavelengths fall within the standard yellow LED spectrum band. The 5nm difference is imperceptible to human vision and does not affect indicator functionality or color perception in typical circuit board indicator applications.

Q: Is the substitute part available in the same packaging format?

A: The substitute is supplied in bulk packaging, whereas the original part number does not specify packaging format in the available data. Both parts use identical component-level packaging (3mm T-1 through-hole right-angle configuration).