LED Circuit Board Indicator 5600F1 Equivalent & Substitute Parts

Part Overview

The VCC 5600F1 is a 3mm red LED circuit board indicator designed for through-hole, right-angle mounting applications. This component operates at 2V with a 10mA rated current and delivers 10 millicandela brightness with a diffused, tinted lens. The 5600F1 carries an obsolete product status, making equivalent and substitute parts necessary for ongoing design support and production continuity. All substitute options maintain core electrical and mechanical compatibility while offering active product availability from alternative manufacturers.

Substiute Parts

5600F1

Visual Communications Company - VCCIn Stock: 8535600F1 Datasheet

Current PartRFQ

5510403F

DialightIn Stock: 10415510403F Datasheet

DirectRFQ

5510404F

DialightIn Stock: 19365510404F Datasheet

DirectRFQ

5510407010F

DialightIn Stock: 21715510407010F Datasheet

DirectRFQ

5510407F

DialightIn Stock: 36605510407F Datasheet

DirectRFQ

5510409F

DialightIn Stock: 33085510409F Datasheet

DirectRFQ

SSF-LXH303ID

Lumex Opto/Components Inc.In Stock: 13566SSF-LXH303ID Datasheet

DirectRFQ

WP934AD/ID

KingbrightIn Stock: 1262WP934AD/ID Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5600F1 are classified into two categories based on electrical and mechanical parameter alignment:

Direct Substitutes (Dialight 551 Series): Parts 5510403F, 5510404F, 5510407010F, and 5510407F maintain identical or equivalent electrical specifications (2V, 10mA, 10mcd, 650nm wavelength) and mechanical form factors (3mm T-1, through-hole right-angle, diffused tinted lens). These components are functionally interchangeable with the 5600F1 and carry active product status from Dialight.

Compatible Alternatives: Parts SSF-LXH303ID (Lumex) and WP934AD/ID (Kingbright) operate within the same 3mm T-1 form factor and mounting configuration but feature different electrical parameters (higher current ratings, different voltage specifications, and varied brightness levels). These alternatives are suitable for applications where the increased electrical performance characteristics are acceptable within circuit design constraints.

Key Parameters Determining Substitution:

• Lens size and style (3mm T-1, round domed, diffused tinted)
• Mounting type (through-hole, right-angle)
• Color (red)
• Configuration (single LED)
• RoHS3 compliance and MSL rating

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement: Select from the Dialight 551 series (5510403F, 5510404F, 5510407010F, 5510407F, or 5510409F). These parts maintain identical electrical specifications to the 5600F1 and require no circuit modifications. All Dialight alternatives carry active product status and ROHS3 compliance. Part 5510407F offers the highest inventory availability (3579 units) among direct substitutes.

For Applications Requiring Enhanced Performance: The Lumex SSF-LXH303ID provides increased brightness (40mcd versus 10mcd) and wider viewing angle (60° versus unspecified), suitable for applications demanding higher visibility. This part operates at 2.1V and 20mA, requiring circuit design verification to confirm compatibility with existing current-limiting resistor networks.

For Cost-Optimized Designs: The Kingbright WP934AD/ID operates at lower forward voltage (1.9V) and higher current (30mA), offering potential power efficiency advantages in specific circuit topologies. Circuit validation is required due to electrical parameter variance from the original 5600F1 specification.

Compliance Assurance: All substitute parts maintain ROHS3 compliance, EAR99 ECCN classification, and MSL rating of 1 (Unlimited), ensuring regulatory and environmental compatibility with the original component.

Frequently Asked Questions (FAQ)

Q: Can the Dialight 5510403F directly replace the VCC 5600F1 without circuit modification?

A: Yes. The 5510403F maintains identical voltage (2V), current (10mA), brightness (10mcd), and wavelength (650nm) specifications. The only difference is the specified 45° viewing angle versus the unspecified viewing angle of the 5600F1. No circuit changes are required.

Q: What is the primary difference between Dialight parts 5510404F and 5510407F?

A: Both parts operate at identical electrical specifications (2V, 10mA, 10mcd, 650nm). The 5510407F specifies a 45° viewing angle, while the 5510404F does not specify a viewing angle. The 5510407F has higher inventory availability (3579 units versus 1892 units).

Q: Can the Lumex SSF-LXH303ID be used as a direct substitute?

A: The SSF-LXH303ID is mechanically compatible (3mm T-1, through-hole right-angle, diffused tinted red lens) but operates at different electrical parameters: 2.1V forward voltage, 20mA current, and 40mcd brightness. Circuit design review is required to confirm compatibility with existing resistor networks and power supply specifications.

Q: What are the key mechanical compatibility factors for all substitute parts?

A: All substitute parts share the following mechanical specifications: 3mm T-1 lens size, round domed diffused tinted lens, single red LED configuration, and through-hole right-angle mounting. These factors ensure physical interchangeability on printed circuit boards designed for the 5600F1.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts (Dialight 551 series, Lumex SSF-LXH303ID, and Kingbright WP934AD/ID) carry ROHS3 compliance certification and MSL rating of 1 (Unlimited), matching the environmental and regulatory status of the original 5600F1.

Q: Which substitute part offers the best inventory availability?

A: The Lumex SSF-LXH303ID provides the highest inventory level at 13,508 units. Among direct electrical equivalents, the Dialight 5510407F offers the highest availability at 3,579 units.