Dialight 5592201813 LED Panel Indicator Green - Equivalent & Substitute Parts

Part Overview

The Dialight 5592201813 is a green LED panel indicator with diffused lens, designed for snap-in panel mounting applications. This part is classified as obsolete, which necessitates identification of equivalent substitute components for ongoing system support and new designs. The substitute parts listed maintain identical electrical and mechanical specifications while offering improved product status and compliance certifications.

Substiute Parts

5592201813

DialightIn Stock: 10335592201813 Datasheet

Current PartRFQ

5592201813F

DialightIn Stock: 8745592201813F Datasheet

DirectRFQ

5592201003F

DialightIn Stock: 76835592201003F Datasheet

Parametric EquivalentRFQ

5592201023F

DialightIn Stock: 9915592201023F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Dialight 5592201813 are qualified based on strict equivalence across the following critical parameters:

• Electrical specifications: Forward voltage (2.1V), maximum current (25mA), wavelength (563nm), and luminous intensity (10mcd)
• Optical characteristics: Green lamp color, diffused lens transparency, 65° viewing angle
• Mechanical compatibility: 5mm T-1 3/4 lens size, round domed top lens style, 0.25" (6.35mm) round panel cutout, 6-inch wire lead termination
• Environmental ratings: MSL 1 (Unlimited moisture sensitivity level)
• Regulatory compliance: ECCN EAR99, HTSUS 8541.41.0000

All substitute parts maintain these parameters without deviation. Differences exist only in product status and RoHS compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

For applications currently using the obsolete Dialight 5592201813, direct substitution is supported by three active alternatives: 5592201813F, 5592201003F, and 5592201023F. All three parts are electrically and mechanically identical to the original component.

The primary distinction among substitute options is product status and compliance certification. Parts 5592201813F, 5592201003F, and 5592201023F are all classified as active products with ROHS3 compliance, whereas the original 5592201813 is obsolete and RoHS non-compliant. For new designs or systems requiring RoHS compliance, any of the three active substitutes are appropriate selections.

Inventory availability should be considered as a secondary factor: 5592201003F maintains the highest stock level at 7621 units, followed by 5592201813F at 784 units, and 5592201023F at 899 units.

Frequently Asked Questions (FAQ)

Q: Can the Dialight 5592201813 be directly replaced with 5592201813F, 5592201003F, or 5592201023F?

A: Yes. All three substitute parts maintain identical electrical specifications (2.1V, 25mA), optical characteristics (green diffused lens, 563nm wavelength, 10mcd, 65° viewing angle), and mechanical dimensions (5mm T-1 3/4 lens, 0.25" panel cutout, 6-inch wire leads). Direct substitution is supported without circuit modification.

Q: What is the difference between the three substitute parts?

A: The three substitute parts are electrically and mechanically equivalent. The differences are limited to product status (all three are active versus the original obsolete status) and RoHS compliance certification (all three are ROHS3 compliant versus the original non-compliant status). Packaging is bulk for all three substitutes.

Q: Why is the original 5592201813 listed as obsolete?

A: The original part is classified as obsolete, which is why equivalent substitutes are necessary for ongoing system support and procurement. The active substitute parts provide continuity for applications requiring this LED panel indicator specification.

Q: Are there any compatibility concerns when substituting these parts?

A: No compatibility concerns exist. The substitute parts are designed for identical panel cutout dimensions (0.25" round), lens size (5mm T-1 3/4), and wire lead configuration (6-inch leads). No mechanical or electrical modifications to the host system are required.

Q: Which substitute part should be selected for new designs?

A: Any of the three active substitutes (5592201813F, 5592201003F, or 5592201023F) are appropriate for new designs. Selection may be based on inventory availability, packaging preference, or existing supplier relationships. All three parts meet ROHS3 compliance requirements.