TE Connectivity AMP Connectors 5-569550-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5-569550-3 is a modular connector plug designed for 8-position 8-contact (8p8c) RJ45 Ethernet applications. This shielded connector is rated for Cat5e performance and utilizes IDC (Insulation Displacement Contact) termination technology for round cable with solid wires. The product is classified as obsolete, necessitating identification of active equivalent alternatives that maintain functional and electrical compatibility for ongoing system support and new installations.

Substiute Parts

5-569550-3

TE Connectivity AMP ConnectorsIn Stock: 9395-569550-3 Datasheet

Current PartRFQ

SS-37200-028

Stewart ConnectorIn Stock: 67711SS-37200-028 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 5-569550-3 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Connector type: Plug configuration
• Contact count and arrangement: 8p8c (RJ45, Ethernet) standard
• Shielding requirement: Shielded construction
• Performance rating: Cat5e category
• Termination technology: IDC method
• Housing material: Polycarbonate (PC)
• Contact finish: Gold plating

Compatible Substitute: The Stewart Connector SS-37200-028 satisfies all mandatory parameters for direct substitution. This part maintains identical connector topology, shielding architecture, and performance specifications while offering active product status and improved inventory availability.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: Stewart Connector SS-37200-028

The Stewart Connector SS-37200-028 is the direct functional equivalent for the obsolete TE Connectivity 5-569550-3. Selection of this substitute is supported by the following engineering factors:

Compliance and Regulatory Status: Both parts maintain ROHS3 compliance and identical ECCN/HTSUS classifications, ensuring regulatory continuity in procurement and deployment.

Product Lifecycle Status: The Stewart Connector SS-37200-028 carries active product status with substantial inventory availability (67,681 units), providing supply chain reliability and long-term sourcing security compared to the obsolete TE Connectivity part.

Functional Compatibility: The substitute maintains all critical electrical and mechanical parameters: 8p8c RJ45 configuration, Cat5e performance rating, shielded construction, IDC termination, and identical contact finish specifications (50.0µin gold plating).

Physical Dimensions: The Stewart Connector exhibits a marginal length difference of 0.018" (0.46mm), which falls within standard connector tolerance ranges and does not impact functional performance or mechanical fit in standard RJ45 applications.

Cable Type Flexibility: The Stewart Connector SS-37200-028 accommodates both solid and stranded wire configurations, providing broader application flexibility compared to the original part specification of solid wires only.

Frequently Asked Questions (FAQ)

Q: Can the Stewart Connector SS-37200-028 directly replace the TE Connectivity 5-569550-3 in existing installations?

A: Yes. Both connectors share identical 8p8c RJ45 topology, shielding architecture, Cat5e performance rating, and IDC termination method. The physical dimension variance of 0.018" is within standard connector tolerances and does not affect mechanical compatibility or electrical performance in standard Ethernet applications.

Q: What is the significance of the cable type difference between the two parts?

A: The original TE Connectivity part specifies solid wire compatibility only. The Stewart Connector substitute accommodates both solid and stranded wire configurations. This expanded capability does not create incompatibility; it provides additional flexibility for applications using either wire type.

Q: Are there compliance or regulatory differences between these parts?

A: No. Both parts maintain identical ROHS3 compliance status, ECCN classification (EAR99), and HTSUS codes (8536.69.8000). Regulatory requirements and export classifications remain unchanged with this substitution.

Q: Why is product status relevant to this substitution?

A: The TE Connectivity 5-569550-3 is classified as obsolete, indicating discontinued manufacturing and limited future availability. The Stewart Connector SS-37200-028 maintains active product status with robust inventory levels, ensuring reliable long-term sourcing for new designs and system maintenance.

Q: What are the contact material differences, and do they affect performance?

A: The original part uses phosphor bronze contacts; the substitute uses copper alloy contacts. Both materials are standard for RJ45 connectors and maintain the specified 50.0µin gold finish thickness. Contact material differences do not impact electrical performance or Cat5e compliance in this application category.

Q: Are the shield materials interchangeable?

A: Yes. The original part uses copper alloy shielding; the substitute uses brass shielding. Both materials provide equivalent electromagnetic shielding performance for Cat5e Ethernet applications and maintain the shielded connector classification.

Q: What packaging considerations apply to the Stewart Connector substitute?

A: The Stewart Connector SS-37200-028 is supplied in bulk packaging, compared to the original part's unspecified packaging. Bulk packaging is standard for modular connectors and does not affect component functionality or performance specifications.