TE Connectivity 5569350-1 Modular Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5569350-1 is an 8p8c (RJ45) modular jack connector with 90° right-angle orientation, designed for unshielded Cat5 Ethernet applications. This through-hole solder-terminated connector features a board guide and operates across the industrial temperature range of -40°C to 85°C. The part maintains Active product status with full RoHS compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified to address inventory availability, supply chain continuity, and application-specific requirements while maintaining core electrical and mechanical compatibility within the modular connector category.

Substiute Parts

5569350-1

TE Connectivity AMP ConnectorsIn Stock: 11355569350-1 Datasheet

Current PartRFQ

0432498104

MolexIn Stock: 50160432498104 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 5569350-1 is determined by strict alignment of the following core parameters:

Critical Matching Parameters:

• Connector Type: Jack modular connector
• Contact Configuration: 8p8c (RJ45, Ethernet)
• Orientation: 90° right-angle
• Mounting Type: Through hole
• Termination: Solder
• Shielding: Unshielded
• Contact Material: Phosphor bronze
• Contact Finish: Gold plating
• Tab Direction: Down
• Operating Temperature: -40°C to 85°C
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameters:

• Category Rating: Cat4 or Cat5 (both support 8p8c Ethernet applications)
• Housing Material: Different polymer compositions (PCT polyester vs. PA nylon glass-filled)
• Number of Ports: Variation acceptable based on application requirements
• Features: Board guide vs. board lock (both provide mechanical stability)
• Manufacturer: Different qualified suppliers

The Molex 0432498104 meets all critical matching parameters and is classified as a direct substitute despite Cat4 rating versus Cat5 specification.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5569350-1 Selection Criteria:

• Primary choice for Cat5 rated applications requiring maximum bandwidth specification
• RoHS Compliant status suitable for standard industrial applications
• Board guide feature provides specific mechanical alignment requirements
• PCT polyester housing material specified for particular environmental conditions
• Three-port configuration for multi-connection applications

Molex 0432498104 Selection Criteria:

• Direct substitute when Cat4 rating meets application bandwidth requirements
• ROHS3 Compliant status provides enhanced regulatory alignment for newer designs
• Board lock feature offers alternative mechanical retention method
• Polyamide nylon glass-filled housing provides alternative material specification
• Single-port configuration suitable for individual connection points
• Higher inventory availability (4908 pcs vs. 1124 pcs) supports rapid procurement

Both parts maintain Active product status, identical operating temperature ranges, and equivalent electrical performance within their respective category ratings. Selection between these parts depends on specific application bandwidth requirements and mechanical mounting preferences.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0432498104 replace the TE Connectivity 5569350-1 in all applications?

A: The Molex 0432498104 functions as a direct electrical and mechanical substitute for through-hole solder-terminated 8p8c unshielded modular jack applications. The Cat4 rating supports standard Ethernet applications. Applications specifically requiring Cat5 bandwidth certification should use the TE Connectivity 5569350-1.

Q: What is the difference between the board guide and board lock features?

A: Both features provide mechanical stability during PCB assembly. The board guide (TE Connectivity 5569350-1) and board lock (Molex 0432498104) are functionally equivalent retention methods. Selection depends on PCB design and assembly process requirements.

Q: Are the housing materials interchangeable?

A: Both housing materials (PCT polyester and PA nylon glass-filled) meet the operating temperature range of -40°C to 85°C and moisture sensitivity requirements. Material selection depends on specific environmental exposure and mechanical stress conditions in the application.

Q: Do these connectors require different PCB footprints?

A: Both connectors share identical 8p8c RJ45 contact configuration, 90° right-angle orientation, through-hole mounting, and down tab direction. PCB footprints are compatible.

Q: What is the significance of the contact finish thickness specification?

A: Both parts specify 50.0µin (1.27µm) gold plating thickness, ensuring equivalent contact resistance, durability, and corrosion protection across solder-terminated connections.

Q: Are both parts compliant with current regulatory standards?

A: The TE Connectivity 5569350-1 is RoHS Compliant. The Molex 0432498104 is ROHS3 Compliant. Both meet EAR99 export classification and 8536.69.4040 HTSUS coding. REACH status differs (Vendor Undefined vs. REACH Unaffected), which may affect supply chain documentation requirements.

Q: What is the moisture sensitivity level, and why is it important?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly. These connectors do not require special dry-pack storage or baking procedures prior to soldering.