Equivalent & Substitute Parts for TE Connectivity 555162-1

Part Overview

The TE Connectivity 555162-1 is a modular jack connector with 8 positions/8 contacts (RJ45, Ethernet) configured for 90° right-angle mounting with through-hole solder termination. This unshielded Cat3-rated connector features board lock and panel stop functionality. The part is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design and procurement requirements. Active alternatives with identical or compatible electrical and mechanical specifications are available from multiple manufacturers.

Substiute Parts

555162-1

TE Connectivity AMP ConnectorsIn Stock: 673555162-1 Datasheet

Current PartRFQ

5555162-1

TE Connectivity AMP ConnectorsIn Stock: 235505555162-1 Datasheet

DirectRFQ

33TS3004HS-88B

Amphenol CONECIn Stock: 73533TS3004HS-88B Datasheet

SimilarRFQ

92250-588LF

Amphenol ICC (FCI)In Stock: 87192250-588LF Datasheet

SimilarRFQ

E5388-000012-L

Pulse ElectronicsIn Stock: 4292E5388-000012-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 555162-1 is determined by strict equivalence across the following critical parameters: connector type (jack modular), contact configuration (8p8c RJ45), orientation (90° right-angle), mounting method (through-hole solder), and tab direction (down). The primary distinction among available substitutes is shielding classification.

Direct Equivalent (Unshielded Category): The TE Connectivity 5555162-1 maintains identical electrical and mechanical specifications to the 555162-1, with the primary difference being active product status and RoHS compliance. This part is a direct functional replacement.

Shielded Alternatives: The Amphenol CONEC 33TS3004HS-88B and Amphenol ICC (FCI) 92250-588LF are shielded variants that maintain the same 8p8c RJ45 configuration, 90° right-angle orientation, through-hole solder termination, and tab-down design. These parts introduce electromagnetic shielding, which alters the housing material and contact finish thickness but preserves mechanical compatibility and pin assignment.

Unshielded Alternative (Obsolete Status): The Pulse Electronics E5388-000012-L is an unshielded alternative with identical shielding classification to the 555162-1, though it carries obsolete product status.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Unshielded Applications): The TE Connectivity 5555162-1 is the primary recommended substitute for the obsolete 555162-1. This part maintains complete electrical and mechanical compatibility while offering active product status and RoHS compliance. The identical contact finish thickness (50.0µin), operating temperature range (-40°C ~ 85°C), and unshielded configuration ensure seamless integration into existing designs without circuit board layout modifications.

For Shielded Applications: When electromagnetic interference mitigation is required, the Amphenol ICC (FCI) 92250-588LF provides shielded functionality with matching contact finish thickness (50.0µin) and operating temperature range (-40°C ~ 70°C). The Amphenol CONEC 33TS3004HS-88B offers shielded performance with ROHS3 compliance, though contact finish thickness is reduced to 6.00µin and operating temperature is unspecified.

For Unshielded Applications with Reduced Specifications: The Pulse Electronics E5388-000012-L maintains unshielded configuration and operating temperature range (-40°C ~ 85°C) but carries obsolete product status. This part is suitable only when new inventory of the 5555162-1 is unavailable and design requirements do not mandate active product status.

Compliance Considerations: All active substitute parts (5555162-1, 33TS3004HS-88B, 92250-588LF) meet current RoHS requirements. The original 555162-1 is RoHS non-compliant; designs requiring RoHS compliance must transition to an active substitute.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5555162-1 be used as a direct replacement for the 555162-1?

A: Yes. The 5555162-1 is electrically and mechanically identical to the 555162-1 across all critical parameters: 8p8c RJ45 configuration, 90° right-angle orientation, through-hole solder termination, unshielded design, tab-down configuration, and identical contact finish thickness (50.0µin). The primary differences are active product status and RoHS compliance.

Q: What is the difference between the unshielded and shielded substitute options?

A: Unshielded variants (555162-1, 5555162-1, E5388-000012-L) lack electromagnetic shielding and are suitable for applications with low EMI requirements. Shielded variants (33TS3004HS-88B, 92250-588LF) incorporate shielding to reduce electromagnetic interference. Shielded parts require different housing materials and may have different contact finish thicknesses. Pin assignment and mechanical footprint remain compatible.

Q: Are there packaging differences among the substitute parts?

A: Yes. The 555162-1 is supplied in bulk packaging, the 5555162-1 in trays, the 33TS3004HS-88B in boxes, the 92250-588LF in tubes, and the E5388-000012-L in bulk. These packaging differences do not affect electrical or mechanical performance but may influence procurement and handling procedures.

Q: What is the operating temperature difference between the 92250-588LF and other substitutes?

A: The 92250-588LF operates from -40°C to 70°C, while the 555162-1, 5555162-1, and E5388-000012-L operate from -40°C to 85°C. Applications requiring operation above 70°C must use the 5555162-1 or E5388-000012-L. The 33TS3004HS-88B does not specify an operating temperature range.

Q: Does contact finish thickness affect substitution compatibility?

A: Contact finish thickness does not affect electrical or mechanical compatibility. The 555162-1, 5555162-1, and 92250-588LF all feature 50.0µin (1.27µm) gold finish thickness. The 33TS3004HS-88B and E5388-000012-L feature 6.00µin (0.152µm) thickness. Both thicknesses meet RJ45 connector standards and are interchangeable from a functional standpoint.

Q: Can I use a shielded connector in place of an unshielded connector?

A: Shielded connectors (33TS3004HS-88B, 92250-588LF) are mechanically and electrically compatible with unshielded applications. However, shielded designs introduce different housing materials and may require grounding provisions. Use shielded variants only when EMI mitigation is necessary or when unshielded alternatives are unavailable.

Q: Why is the 555162-1 marked as obsolete?

A: The 555162-1 is classified as obsolete by TE Connectivity, indicating discontinued production and limited availability. The active equivalent 5555162-1 is the recommended replacement for new designs and ongoing procurement.

Q: Are all substitute parts RoHS compliant?

A: The active substitutes (5555162-1, 33TS3004HS-88B, 92250-588LF) are RoHS compliant. The original 555162-1 is RoHS non-compliant. The E5388-000012-L is RoHS compliant but carries obsolete status. Designs requiring RoHS compliance must use an active substitute.