LED Circuit Board Indicator 5532233300F Equivalent & Substitute Parts

Part Overview

The Dialight 5532233300F is an LED Circuit Board Indicator (CBI) designed for through-hole, right-angle mounting applications. This 3mm bi-level yellow LED features a tinted lens configuration with dual high output elements. The component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the specified parameter range.

Substiute Parts

5532233300F

DialightIn Stock: 11685532233300F Datasheet

Current PartRFQ

SSF-LXH2103YYD/4

Lumex Opto/Components Inc.In Stock: 3760SSF-LXH2103YYD/4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 5532233300F is determined by the following critical parameters:

• Wavelength peak at 585nm (yellow spectrum)
• Dual high configuration (2 High)
• 20mA current rating
• 2.1V voltage rating
• Through hole, right angle mounting type
• RoHS3 compliance and MSL 1 rating

The identified substitute part SSF-LXH2103YYD/4 (Lumex Opto/Components Inc.) maintains electrical equivalence across all primary functional parameters. Variations in millicandela rating, viewing angle, and lens style (diffused vs. tinted) represent performance enhancements rather than incompatibilities, as these parameters fall within acceptable tolerance ranges for circuit board indicator applications.

Parameter Comparison

Engineering Selection Recommendations

Both the primary part (5532233300F) and substitute part (SSF-LXH2103YYD/4) maintain Active product status with full RoHS3 compliance and MSL 1 rating. Selection between these components should be based on application-specific requirements:

The 5532233300F provides a tinted lens configuration with 1.6mcd output and 45° viewing angle, suitable for applications requiring controlled light distribution and lower brightness levels.

The SSF-LXH2103YYD/4 offers enhanced brightness at 30mcd with a 60° viewing angle and diffused lens treatment, appropriate for applications requiring higher visibility or wider light distribution patterns.

Both components share identical electrical specifications (20mA, 2.1V, 585nm wavelength) and mounting configuration (through hole, right angle), ensuring direct circuit board compatibility without design modification.

Frequently Asked Questions (FAQ)

Q: Can SSF-LXH2103YYD/4 be used as a direct replacement for 5532233300F?

A: Yes. Both components share identical electrical ratings (20mA, 2.1V), wavelength (585nm), configuration (2 High), and mounting type (through hole, right angle). The substitute part provides higher brightness (30mcd vs. 1.6mcd) and wider viewing angle (60° vs. 45°), which represent performance improvements rather than incompatibilities.

Q: What are the key differences between these two parts?

A: The primary differences are millicandela rating (1.6mcd vs. 30mcd), viewing angle (45° vs. 60°), and lens treatment (tinted vs. diffused, tinted). These variations affect light output intensity and distribution but do not impact electrical compatibility or circuit board mounting.

Q: Are both parts RoHS3 compliant?

A: Yes. Both 5532233300F and SSF-LXH2103YYD/4 are RoHS3 compliant with MSL 1 (unlimited) moisture sensitivity rating.

Q: Will the substitute part fit the same PCB footprint?

A: Yes. Both components use through-hole, right-angle mounting configuration. Physical compatibility is maintained for standard circuit board layouts designed for 3mm LED indicators.

Q: Which part should I select for higher visibility applications?

A: The SSF-LXH2103YYD/4 is suitable for applications requiring higher brightness output (30mcd) and wider light distribution (60° viewing angle).