LED Circuit Board Indicator 5500707004F Equivalent & Substitute Parts

Part Overview

The Dialight 5500707004F is an active LED Circuit Board Indicator featuring a 4-wide green configuration with diffused lens technology. This component is designed for 5V applications requiring 12mA current draw with a peak wavelength of 565nm. The part is mounted through-hole with right-angle orientation, suitable for PCB integration in indicator applications. As an active product in inventory with ROHS3 compliance and unlimited moisture sensitivity rating, equivalent and substitute parts are identified to support procurement flexibility and design alternatives.

Substiute Parts

5500707004F

DialightIn Stock: 11595500707004F Datasheet

Current PartRFQ

5510607004F

DialightIn Stock: 15155510607004F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 5500707004F is determined by the following critical parameters:

• Voltage Rating: 5V (exact match required)
• Color: Green (x 4) (exact match required)
• Wavelength - Peak: 565nm (exact match required)
• Configuration: 4 Wide (exact match required)
• Mounting Type: Through Hole, Right Angle (exact match required)
• Viewing Angle: 60° (exact match required)

The substitute part 5510607004F maintains compatibility across all critical electrical and mechanical parameters. Variations in current draw (12mA vs. 10mA), millicandela rating (8mcd vs. 19mcd), lens style (diffused vs. diffused/tinted), and lens size (unspecified vs. 3mm T-1) represent design alternatives within the same functional category and do not preclude substitution in applications where the primary parameters align.

Parameter Comparison

Engineering Selection Recommendations

Both the 5500707004F and 5510607004F are active products manufactured by Dialight with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Selection between these parts is based on application-specific requirements:

The 5500707004F operates at 12mA with 8mcd brightness output and is suitable for applications requiring standard diffused lens characteristics with specified current parameters.

The 5510607004F operates at 10mA with 19mcd brightness output, offering higher luminous intensity with reduced current draw. The tinted diffused lens and 3mm T-1 form factor provide alternative optical and mechanical characteristics within the same electrical specification envelope.

Both parts maintain identical voltage rating (5V), color (green x 4), wavelength (565nm), configuration (4 wide), viewing angle (60°), and mounting type (through hole, right angle). Selection should be based on circuit current budget, required brightness level, and physical form factor compatibility with PCB layout constraints.

Frequently Asked Questions (FAQ)

Q: Can the 5510607004F directly replace the 5500707004F in existing designs?

A: Direct replacement is possible when circuit design accommodates the 2mA current reduction (12mA to 10mA) and accepts the higher brightness output (8mcd to 19mcd). The identical voltage rating, color, wavelength, configuration, viewing angle, and mounting type ensure electrical and mechanical compatibility. Physical form factor differences (3mm T-1 lens vs. unspecified lens) must be verified against PCB layout constraints.

Q: What are the key differences between these substitute parts?

A: The primary differences are current draw (12mA vs. 10mA), millicandela rating (8mcd vs. 19mcd), lens type (diffused vs. diffused/tinted), and lens style/size (unspecified vs. 3mm T-1 round with domed top). All other critical parameters—voltage, color, wavelength, configuration, viewing angle, and mounting type—are identical.

Q: Are both parts RoHS compliant?

A: Yes, both the 5500707004F and 5510607004F are ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Q: What mounting considerations apply to these parts?

A: Both parts feature through-hole, right-angle mounting. The 5510607004F includes a specified 3mm T-1 lens form factor, while the 5500707004F lens dimensions are not specified. PCB hole spacing and component clearance must accommodate the physical dimensions of the selected part.