TE Connectivity 5-487508-4 FFC FPC Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5-487508-4 is a 5-position FFC/FPC flat flexible connector from the Triomate series, designed for through-hole, right-angle mounting applications. This connector features top-mounted contacts with 0.100" (2.54mm) pitch spacing and kinked pin termination, suitable for applications requiring reliable flat flexible cable interconnection. The part is currently active in production with 999 pieces available in new original stock. Substitute parts are identified to address inventory availability, extended lead times, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

5-487508-4

TE Connectivity AMP ConnectorsIn Stock: 10645-487508-4 Datasheet

Current PartRFQ

5-520314-5

TE Connectivity AMP ConnectorsIn Stock: 91965-520314-5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of FFC/FPC connectors is determined by strict equivalence across critical electrical and mechanical parameters. The primary substitute part 5-520314-5 maintains compatibility with the main part 5-487508-4 based on the following criteria:

Critical Matching Parameters:

• Connector type classification (FFC, FPC)
• Position count (5 positions)
• Pitch specification (0.100" / 2.54mm)
• Mounting configuration (Through Hole, Right Angle)
• Contact position orientation (Top)
• Termination method (Kinked Pin)
• FFC/FPC thickness accommodation (0.13mm ~ 0.38mm)
• Height above board (0.190" / 4.83mm)
• Contact material (Phosphor Bronze)
• Contact finish (Tin)
• Housing material (Polyester Thermoplastic, Glass Filled)
• Electrical ratings (250V, 1A)
• Operating temperature range (-55°C ~ 105°C)
• Flammability compliance (UL94 V-0)
• Mating cycle rating (25)

The substitute part 5-520314-5 is functionally equivalent to 5-487508-4 across all critical parameters, with differences limited to inventory availability, RoHS certification variant, and MSL classification.

Parameter Comparison

Engineering Selection Recommendations

Both the main part 5-487508-4 and substitute part 5-520314-5 are active production components from TE Connectivity's Triomate series. Selection between these parts is based on the following engineering considerations:

Primary Part (5-487508-4): Use when RoHS Compliant certification is specifically required and inventory availability is sufficient for project timelines.

Substitute Part (5-520314-5): Use when extended inventory availability is required or when ROHS3 Compliant certification meets application requirements. This part offers significantly higher stock levels (9172 pieces versus 999 pieces), reducing lead time risk for high-volume production runs.

Both parts maintain identical electrical performance, mechanical compatibility, and thermal operating characteristics. The substitute part's ROHS3 Compliant status represents an updated regulatory compliance classification and does not indicate functional or performance differences. Both parts comply with UL94 V-0 flammability requirements and operate across the full -55°C to 105°C temperature range.

Frequently Asked Questions (FAQ)

Q: Can 5-520314-5 be used as a direct replacement for 5-487508-4 in existing designs?

A: Yes. Both parts are electrically and mechanically equivalent across all critical parameters including position count, pitch, mounting configuration, contact material, electrical ratings, and operating temperature range. No design modifications are required.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: ROHS3 Compliant represents the current regulatory classification under the updated RoHS Directive 2011/65/EU. Both certifications indicate compliance with hazardous substance restrictions. The substitute part's ROHS3 status reflects current regulatory alignment and does not affect functional performance or compatibility.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts share identical mounting type (Through Hole, Right Angle), height above board (0.190" / 4.83mm), and FFC/FPC thickness accommodation (0.13mm ~ 0.38mm). PCB footprints and mechanical clearances are identical.

Q: What is the significance of the higher inventory level for 5-520314-5?

A: The substitute part 5-520314-5 maintains 9172 pieces in stock compared to 999 pieces for the main part. This higher availability reduces procurement lead times and supply chain risk for production schedules requiring larger quantities or expedited delivery.

Q: Do both parts support the same flat flexible cable specifications?

A: Yes. Both connectors accommodate FFC/FPC cables with thickness ranging from 0.13mm to 0.38mm. Cable compatibility, insertion force, and contact retention are identical.

Q: What is the MSL classification difference, and does it affect usage?

A: The main part lists MSL as Not Applicable, while the substitute part specifies MSL 1 (Unlimited). MSL 1 indicates the component has unlimited shelf life without moisture sensitivity concerns. This difference does not affect electrical or mechanical performance and simplifies storage and handling procedures.

Q: Are mating cycle ratings identical?

A: Yes. Both parts are rated for 25 mating cycles, indicating equivalent mechanical durability and contact reliability across the specified operating life.