Phoenix Contact 5452865 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 5452865 is a 10-position terminal block plug with female sockets, 0.197" (5.00mm) pitch, and 270° free-hanging in-line mounting. This component is classified as obsolete, making identification of suitable substitutes essential for ongoing system maintenance and new designs requiring compatible connectivity solutions.

The BCVP series plug accommodates wire gauges from 12-30 AWG (0.2-2.5mm²) with screw termination and operates within IEC ratings of 12A at 320V. As an obsolete product, sourcing alternatives from active product lines ensures long-term component availability and supply chain continuity.

Substiute Parts

5452865

Phoenix ContactIn Stock: 8955452865 Datasheet

Current PartRFQ

1740741

Phoenix ContactIn Stock: 9431740741 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 5452865 is determined by strict alignment of the following critical parameters:

Position Count & Pitch: The substitute must maintain 10 positions at 0.197" (5.00mm) pitch to ensure mechanical and electrical compatibility with existing mating connectors and PCB layouts.

Wire Entry Orientation: The 270° free-hanging in-line configuration is mandatory for applications where the plug must be positioned perpendicular to the mating receptacle.

Termination Method: Screw-based termination is required for compatibility with existing wiring harnesses and installation procedures.

Electrical Ratings: The substitute must meet or exceed the IEC current rating of 12A. Voltage ratings must be equal to or greater than 320V IEC to maintain system safety margins.

Wire Gauge Compatibility: Support for 12-30 AWG (0.2-2.5mm²) wire range ensures compatibility with existing conductor specifications.

Mechanical Mounting: Free-hanging in-line mounting type is non-negotiable for form-factor compatibility.

The Phoenix Contact 1740741 satisfies all substitution criteria and is classified as an active product, providing assured long-term availability.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1740741 is the qualified substitute for the obsolete 5452865 terminal block plug. Both components are RoHS compliant and carry MSL Level 1 moisture sensitivity ratings, ensuring compliance with environmental and regulatory requirements.

The 1740741 operates at 630V IEC, providing a 310V safety margin above the original 320V specification. This enhanced voltage rating does not compromise compatibility and offers improved performance headroom for applications operating near maximum electrical stress limits.

The substitute incorporates retention latches on the non-wire side and UL94 V-0 flammability rating, representing design improvements over the obsolete predecessor while maintaining full mechanical and electrical interchangeability.

Both components share identical pitch, position count, wire entry orientation, termination method, and wire gauge specifications, confirming direct substitution capability without design modification.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1740741 directly replace the 5452865 in existing applications?

A: Yes. Both components maintain identical 10-position configuration at 0.197" (5.00mm) pitch, 270° wire entry, free-hanging in-line mounting, and screw termination. Mechanical and electrical interchangeability is confirmed across all critical parameters.

Q: What is the significance of the higher 630V rating on the 1740741?

A: The 1740741 operates at 630V IEC compared to the 5452865 at 320V IEC. This represents an enhanced voltage capability that maintains full compatibility while providing additional safety margin. Applications operating at or below 320V experience no functional difference.

Q: Are there packaging differences between these components?

A: The 5452865 is supplied in standard packaging, while the 1740741 is available in bulk packaging. Both are new original stock. Packaging format does not affect electrical or mechanical performance.

Q: Do the retention latches on the 1740741 affect compatibility?

A: No. The retention latches on the non-wire side of the 1740741 enhance mechanical security during mating operations without affecting connector geometry or electrical characteristics. The component remains fully compatible with existing receptacles designed for the 5452865.

Q: Is the UL94 V-0 flammability rating on the 1740741 a requirement for substitution?

A: The UL94 V-0 rating represents an improvement in material specification and does not create incompatibility. Applications previously using the 5452865 will experience equivalent or improved performance with the 1740741.

Q: What wire gauges are supported by the 1740741?

A: The 1740741 supports 12-30 AWG (0.2-2.5mm²), identical to the 5452865. Existing wire specifications require no modification.

Q: Are both components RoHS compliant?

A: Yes. Both the 5452865 and 1740741 are RoHS compliant with MSL Level 1 moisture sensitivity, meeting current environmental and regulatory standards.