Phoenix Contact 5452863 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 5452863 is an 8-position terminal block plug with female sockets, 0.197" (5.00mm) pitch, and 270° free-hanging in-line mounting. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new designs requiring compatible connectivity solutions.

The BCVP series plug accommodates wire gauges from 12-30 AWG (0.2-2.5mm²) with screw termination and supports IEC ratings of 12A at 320V and UL ratings of 12A at 300V.

Substiute Parts

5452863

Phoenix ContactIn Stock: 12115452863 Datasheet

Current PartRFQ

1877915

Phoenix ContactIn Stock: 15451877915 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 5452863 is determined by strict alignment of the following critical parameters:

• Connector Type & Configuration: Plug with female sockets, 8-position, 0.197" (5.00mm) pitch
• Mounting & Orientation: Free hanging (in-line) with 270° wire entry
• Electrical Ratings: Minimum 12A current capacity and voltage compatibility
• Termination Method: Screw-based connection with M3 screw size
• Wire Compatibility: Support for 12-30 AWG (0.2-2.5mm²) wire gauges
• Regulatory Compliance: RoHS compliance and equivalent certifications

The substitute part Phoenix Contact 1877915 meets all critical substitution criteria. It maintains identical connector geometry, position count, pitch, mounting configuration, and wire entry angle. Both parts support the same wire gauge range and screw termination specifications with identical M3 screw sizing and torque requirements.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1877915 is a direct functional substitute for the obsolete 5452863. Both components are manufactured by Phoenix Contact and maintain identical mechanical and electrical interface specifications. The 1877915 is classified as active product status, ensuring ongoing availability and supply chain continuity.

The 1877915 provides enhanced electrical performance with a voltage rating of 630V IEC compared to the 5452863's 320V rating, offering additional safety margin in applications operating at or near the original component's voltage limits. The rising cage clamp termination mechanism in the 1877915 provides improved wire retention characteristics while maintaining compatibility with the same M3 screw torque specifications.

Both components carry RoHS compliance certification and equivalent regulatory standing. The 1877915 is supplied in bulk packaging and maintains full compatibility with existing connector systems designed for the 5452863.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1877915 directly replace the 5452863 in existing installations?

A: Yes. Both components share identical connector geometry, 8-position configuration, 0.197" (5.00mm) pitch, 270° wire entry orientation, and free-hanging in-line mounting. Wire gauge compatibility (12-30 AWG / 0.2-2.5mm²) and screw termination specifications are identical, including M3 screw sizing and 0.5-0.6 Nm torque requirements.

Q: What is the difference in voltage rating between these parts?

A: The 5452863 is rated for 320V IEC, while the 1877915 is rated for 630V IEC. Both support 12A current capacity. The higher voltage rating of the 1877915 provides additional operational margin and does not affect compatibility in applications using the original 320V specification.

Q: Are there packaging differences between these parts?

A: The 5452863 is supplied with unspecified packaging, while the 1877915 is supplied in bulk packaging. This difference does not affect electrical or mechanical compatibility.

Q: What is the significance of the "rising cage clamp" termination in the 1877915?

A: The rising cage clamp mechanism provides enhanced wire retention and strain relief during the screw termination process. This is a design improvement that maintains full compatibility with the original screw termination specifications and does not require changes to installation procedures.

Q: Are both parts RoHS compliant?

A: Yes. Both the 5452863 and 1877915 are RoHS compliant and carry equivalent regulatory certifications.