Phoenix Contact 5452833 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 5452833 is a 12-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 90° free-hanging in-line applications. This component features screw termination, rated for 12A at 320V (IEC) and accommodates wire gauges from 12-30 AWG (0.2-2.5mm²). The part is classified as obsolete, making identification of suitable substitutes essential for ongoing system maintenance and new designs requiring compatible connectivity solutions.

Substiute Parts

5452833

Phoenix ContactIn Stock: 9965452833 Datasheet

Current PartRFQ

1921832

Phoenix ContactIn Stock: 12681921832 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 5452833 is determined by strict alignment of the following critical parameters:

• 12-position configuration with 0.200" (5.08mm) pitch spacing
• Female socket plug type with 90° wire entry orientation
• Free-hanging in-line mounting configuration
• Screw-based termination mechanism
• 12A current capacity and minimum 250V voltage rating
• Wire gauge compatibility: 12-30 AWG (0.2-2.5mm²)
• M3 screw size with 0.5-0.6 Nm torque specification
• Mating flange and retention latches (wire side) features

The substitute part 1921832 meets all these criteria, with the distinction of employing a rising cage clamp termination variant within the screw termination family.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1921832 serves as a direct functional substitute for the obsolete 5452833. Both components share identical mechanical and electrical specifications across all critical parameters: 12-position configuration, 0.200" pitch, 90° wire entry, 12A current capacity, and M3 screw termination with matching torque specifications.

The primary distinction is the termination mechanism variant: the 1921832 employs a rising cage clamp design within the screw termination family, which maintains full compatibility with the original application requirements. The voltage rating differential (250V versus 320V) does not preclude substitution in applications operating at or below 250V IEC.

The 1921832 holds active product status with ROHS3 compliance, ensuring long-term availability and regulatory alignment for new designs and system updates. Both components maintain identical moisture sensitivity levels and physical dimensions, supporting direct mechanical and electrical interchange in existing connector interfaces.

Frequently Asked Questions (FAQ)

Q: Can the 1921832 directly replace the 5452833 in existing installations?

A: Yes. Both components share identical 12-position, 0.200" pitch configuration, 90° wire entry orientation, free-hanging mounting, and M3 screw termination with matching torque specifications. The rising cage clamp variant in the 1921832 maintains full functional compatibility.

Q: What is the voltage rating difference between these parts?

A: The 5452833 is rated for 320V IEC, while the 1921832 is rated for 250V IEC. The 1921832 is suitable for applications operating at or below 250V. Applications requiring 320V operation must remain on the original specification.

Q: Are the wire gauge ranges identical?

A: Yes. Both components accommodate 12-30 AWG (0.2-2.5mm²) wire gauges with identical 7mm wire strip length specifications.

Q: What is the significance of the rising cage clamp termination in the 1921832?

A: The rising cage clamp is a screw termination variant that provides enhanced wire retention and simplified installation. It remains within the screw termination family and maintains full compatibility with the original 5452833 specifications.

Q: Does the 1921832 meet current compliance requirements?

A: Yes. The 1921832 holds ROHS3 compliance and active product status, ensuring regulatory alignment and long-term component availability for new designs and system maintenance.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both components share identical insulation height (1.024" / 26.01mm), screw size (M3), and all mechanical interface dimensions, supporting direct mechanical interchange.