Phoenix Contact 5449898 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 5449898 is a 9-position terminal block plug with female sockets, 0.150" (3.81mm) pitch, and 270° free-hanging in-line mounting. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations. The part operates at 8A (IEC/UL) and 320V (IEC) / 300V (UL), supporting wire gauges from 14-30 AWG (0.2-1.5mm²).

Substiute Parts

5449898

Phoenix ContactIn Stock: 6705449898 Datasheet

Current PartRFQ

1827046

Phoenix ContactIn Stock: 9151827046 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 5449898 is determined by strict alignment across the following critical parameters:

• Connector Type & Configuration: 9-position plug with female sockets
• Pitch & Spacing: 0.150" (3.81mm) center-to-center spacing
• Electrical Ratings: Minimum 8A current capacity and 320V voltage rating (IEC standard)
• Wire Gauge Compatibility: Support for 14-30 AWG conductor range
• Mounting & Orientation: Free-hanging in-line configuration with 270° wire entry
• Termination Method: Screw-based connection mechanism
• Material & Safety Compliance: Polyamide housing with UL94 V-0 flammability rating

The substitute part Phoenix Contact 1827046 meets all critical substitution criteria. While it features an enhanced termination style (Rising Cage Clamp screw mechanism) and improved product status (Active), it maintains full electrical, mechanical, and dimensional compatibility with the original part.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1827046 is the qualified substitute for the obsolete 5449898 based on the following engineering criteria:

Electrical Compatibility: Both parts maintain identical current (8A IEC/UL) and voltage ratings (320V IEC / 300V UL), ensuring no derating or circuit redesign is required.

Mechanical Compatibility: Identical 9-position configuration, 0.150" (3.81mm) pitch, 270° wire entry orientation, and free-hanging in-line mounting ensure direct mechanical interchangeability without enclosure or mounting modifications.

Wire Gauge Support: The substitute part supports the full 14-30 AWG range of the original, with extended lower-gauge capability (0.14mm² minimum vs. 0.2mm² original), providing enhanced flexibility for fine-gauge applications.

Termination Enhancement: The Rising Cage Clamp screw mechanism in the 1827046 provides improved contact reliability and reduced installation variability compared to standard screw termination, with documented torque specification (0.22-0.25 Nm).

Compliance Status: The 1827046 carries Active product status with ROHS3 compliance and REACH Unaffected designation, ensuring long-term availability and regulatory alignment for new designs and production continuity.

Material & Safety: Both parts utilize identical Polyamide (PA) Nylon housing with UL94 V-0 flammability rating, maintaining equivalent safety performance in thermal and fire-risk scenarios.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1827046 directly replace the 5449898 in existing installations?

A: Yes. The 1827046 is mechanically and electrically interchangeable with the 5449898. Identical pitch (3.81mm), position count (9), wire entry angle (270°), and electrical ratings (8A / 320V IEC) ensure plug-and-socket compatibility without modification to mating connectors or circuit boards.

Q: What is the significance of the Rising Cage Clamp termination in the 1827046?

A: The Rising Cage Clamp mechanism provides positive wire retention and reduced contact resistance variability compared to standard screw termination. This design reduces installation errors and improves long-term connection reliability. The documented torque specification (0.22-0.25 Nm) enables consistent assembly quality.

Q: Are there wire gauge differences between the two parts?

A: The 1827046 supports a slightly extended lower wire gauge range (0.14mm² minimum vs. 0.2mm² for the 5449898), while maintaining the same upper limit (1.5mm²). This provides additional flexibility for fine-gauge applications without affecting standard 14-30 AWG installations.

Q: Why is the 5449898 listed as obsolete?

A: The 5449898 (BCVP series) has been superseded by the 1827046 (COMBICON MCVW series) as part of Phoenix Contact's product line evolution. The newer series incorporates improved termination technology and maintains Active production status for long-term supply assurance.

Q: What compliance certifications apply to the substitute part?

A: The 1827046 carries ROHS3 compliance and REACH Unaffected status, meeting current European regulatory requirements. Both parts maintain UL94 V-0 flammability certification and M2 screw specifications for consistent safety and performance standards.

Q: Is the packaging format relevant to substitution?

A: The 5449898 is supplied in standard packaging, while the 1827046 is available in Bulk packaging. Packaging format does not affect electrical or mechanical compatibility; selection depends on procurement volume and inventory management requirements.