Phoenix Contact 5449199 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 5449199 is an 8-position terminal block plug with female sockets, 0.138" (4.60mm) pitch, and 90° wire entry. This component is classified as obsolete, making identification of active equivalent parts essential for ongoing procurement and system maintenance. The BCVP series plug is designed for screw termination applications requiring IEC 320V/8A and UL 300V/8A ratings across wire gauges 14-30 AWG (0.2-1.5mm²).

Substiute Parts

5449199

Phoenix ContactIn Stock: 11275449199 Datasheet

Current PartRFQ

1863369

Phoenix ContactIn Stock: 9261863369 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Phoenix Contact 5449199 is determined by strict equivalence across the following critical parameters:

• Electrical Ratings: IEC 320V/8A and UL 300V/8A minimum
• Physical Configuration: 8-position, 0.138" (4.60mm) pitch, 90° wire entry
• Connector Type: Plug with female sockets, free-hanging (in-line) mounting
• Termination Method: Screw-based wire connection
• Housing Material: Polyamide (PA) with UL94 V-0 flammability rating
• Wire Compatibility: Support for 14-30 AWG (0.2-1.5mm²) wire gauges

The substitute part Phoenix Contact 1863369 meets all these criteria while offering an active product status and enhanced specifications in wire gauge range and torque documentation.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1863369 is the direct active equivalent for the obsolete 5449199. Both components share identical electrical ratings (IEC 320V/8A, UL 300V/8A), physical dimensions (8-position, 4.60mm pitch, 90° entry), and housing specifications (Polyamide UL94 V-0).

The 1863369 offers the following advantages:

• Active Product Status: Currently manufactured and supported by Phoenix Contact
• Enhanced Compliance: ROHS3 Compliant with documented REACH Unaffected status
• Improved Wire Gauge Range: Supports 0.14-1.5mm² (includes finer gauges than the original 0.2-1.5mm²)
• Documented Torque Specification: 0.22-0.25 Nm (1.9-2.2 Lb-In) for M2 screws
• Rising Cage Clamp Termination: Advanced screw termination mechanism compared to standard screw design
• Wire Strip Length Documentation: 7mm specification provided

Both components are mechanically and electrically interchangeable within the specified parameters. The 1863369 is supplied in bulk packaging and maintains full compatibility with existing connector systems designed for the 5449199.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1863369 directly replace the 5449199 in existing applications?

A: Yes. Both components share identical electrical ratings (8A at 320V IEC / 300V UL), physical configuration (8-position, 4.60mm pitch, 90° wire entry), and housing material (Polyamide UL94 V-0). The 1863369 is mechanically and electrically compatible with systems designed for the 5449199.

Q: What is the difference between the screw termination methods?

A: The 5449199 uses standard screw termination, while the 1863369 employs a rising cage clamp mechanism. Both methods achieve equivalent electrical and mechanical performance at the specified M2 screw size and torque range (0.22-0.25 Nm for the 1863369).

Q: Does the 1863369 support the same wire gauge range?

A: The 1863369 supports an extended wire gauge range of 0.14-1.5mm² compared to the 5449199's 0.2-1.5mm². This provides additional flexibility for finer gauge wire applications while maintaining full compatibility with the original 0.2-1.5mm² range.

Q: What is the significance of the ROHS3 compliance on the 1863369?

A: ROHS3 Compliant status indicates the 1863369 meets current European Union Restriction of Hazardous Substances regulations. The 5449199 carries RoHS Compliant status. Both are suitable for applications requiring hazardous substance restrictions.

Q: Are there packaging differences between these components?

A: The 5449199 is listed with unspecified packaging, while the 1863369 is supplied in bulk packaging. Packaging format does not affect electrical or mechanical compatibility.

Q: What is the wire strip length specification?

A: The 1863369 specifies a 7mm wire strip length for termination. This parameter was not documented for the 5449199 but represents standard preparation length for the 4.60mm pitch connector family.