TE Connectivity AMP Connectors 5415632-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5415632-2 is a BNC Connector Jack, Female Socket rated at 75 Ohms for panel mount, through-hole solder applications. This coaxial RF connector is designed for PCB integration with bayonet lock fastening and operates across a frequency range up to 2 GHz. The connector is currently in active product status with 694 pieces available in new original inventory. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, manufacturing discontinuation, or design flexibility within specified tolerance ranges.

Substiute Parts

5415632-2

TE Connectivity AMP ConnectorsIn Stock: 7805415632-2 Datasheet

Current PartRFQ

0731317003

MolexIn Stock: 11930731317003 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 5415632-2 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Connector Style: BNC (identical RF connector family)
• Connector Type: Jack, Female Socket (identical gender and socket configuration)
• Impedance: 75 Ohms (identical characteristic impedance for RF signal integrity)
• Frequency - Max: 2 GHz or greater (operational bandwidth compatibility)
• Voltage Rating: 500 V or greater (electrical stress tolerance)

Mechanical Equivalence Requirements:

• Mounting Type: Panel Mount, Through Hole (identical PCB integration method)
• Mounting Feature: Bulkhead - Front Side Nut (identical panel attachment mechanism)
• Contact Termination: Solder (identical connection method to PCB)
• Shield Termination: Solder (identical shielding connection method)
• Fastening Type: Bayonet Lock (identical mating mechanism)
• Number of Ports: 1 (identical port configuration)

Material and Environmental Equivalence Requirements:

• Center Contact Material: Phosphor Bronze (electrical conductivity and durability)
• Center Contact Plating: Gold (corrosion resistance and contact reliability)
• Moisture Sensitivity Level: 1 (Unlimited) (storage and handling compatibility)
• Mating Cycles: 500 or greater (mechanical durability equivalence)

The substitute part Molex 0731317003 meets all critical electrical, mechanical, and environmental parameters required for direct substitution in applications utilizing the TE Connectivity 5415632-2.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: TE Connectivity 5415632-2

The TE Connectivity AMP Connectors 5415632-2 is the specified component and remains the primary selection when available. This connector carries RoHS Compliant certification and REACH Affected status. Current inventory of 694 pieces supports immediate procurement for production requirements.

Substitute Selection: Molex 0731317003

The Molex 0731317003 serves as a qualified substitute when TE Connectivity 5415632-2 availability is constrained. This connector meets all critical electrical and mechanical parameters for direct substitution. The Molex part carries ROHS3 Compliant certification and REACH Unaffected status, providing alternative compliance documentation for supply chain flexibility.

Compliance Considerations:

Both connectors are rated for EAR99 export classification and share identical HTSUS commodity code 8536.69.4010. The TE Connectivity part is RoHS Compliant while the Molex part is ROHS3 Compliant, both meeting current regulatory requirements. The Molex substitute includes additional hardware (lockwasher and nut) in its packaging, which may provide assembly convenience in certain applications.

Dielectric Material Difference:

The TE Connectivity 5415632-2 utilizes Polymethylpentene (PMP) dielectric material, while the Molex 0731317003 uses Polypropylene (PP). Both materials are suitable for 75-ohm RF applications at frequencies up to 2 GHz and maintain electrical performance within specified parameters. This material difference does not preclude substitution for standard RF signal transmission applications.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0731317003 be used as a direct replacement for the TE Connectivity 5415632-2?

A: Yes. The Molex 0731317003 meets all critical electrical and mechanical parameters required for direct substitution. Both connectors are BNC female jack sockets rated at 75 ohms with identical mounting configurations, solder termination, and bayonet lock fastening. Electrical performance and PCB integration are equivalent.

Q: What is the difference in dielectric material between these two connectors?

A: The TE Connectivity 5415632-2 uses Polymethylpentene (PMP) dielectric material, while the Molex 0731317003 uses Polypropylene (PP). Both materials are suitable for 75-ohm RF applications operating up to 2 GHz. The material difference does not affect electrical performance or signal integrity for standard RF transmission applications.

Q: Are there packaging differences between these connectors?

A: Yes. The TE Connectivity 5415632-2 is supplied in tube packaging, while the Molex 0731317003 is supplied in tray packaging. The Molex part also includes additional hardware (1 lockwasher and 1 nut) per connector unit. Packaging differences do not affect connector performance or compatibility.

Q: What compliance certifications apply to each connector?

A: The TE Connectivity 5415632-2 carries RoHS Compliant and REACH Affected certifications. The Molex 0731317003 carries ROHS3 Compliant and REACH Unaffected certifications. Both connectors are classified as EAR99 for export purposes and share the same HTSUS commodity code 8536.69.4010.

Q: Are the operating temperature ranges equivalent?

A: The TE Connectivity 5415632-2 specifies an operating temperature range of -55°C to 85°C. The Molex 0731317003 does not provide an operating temperature specification in the available data. For applications requiring confirmed temperature performance, the TE Connectivity part provides explicit temperature rating documentation.

Q: What is the maximum frequency rating for these connectors?

A: The TE Connectivity 5415632-2 is rated for a maximum frequency of 2 GHz. The Molex 0731317003 does not provide a maximum frequency specification in the available data. Both connectors are suitable for standard 75-ohm RF applications within the 2 GHz bandwidth.

Q: Can these connectors be used interchangeably in existing PCB designs?

A: Yes. Both connectors share identical mounting configurations (panel mount, through-hole, bulkhead front-side nut), solder termination methods, and bayonet lock fastening. PCB footprints and assembly procedures are compatible for direct substitution without design modification.

Q: What is the voltage rating for these connectors?

A: The TE Connectivity 5415632-2 is rated at 500 V. The Molex 0731317003 does not provide a voltage rating specification in the available data. For applications requiring confirmed voltage performance, the TE Connectivity part provides explicit voltage rating documentation.

Q: How many mating cycles are these connectors rated for?

A: Both the TE Connectivity 5415632-2 and Molex 0731317003 are rated for 500 mating cycles, indicating equivalent mechanical durability and connector lifespan under normal use conditions.