TE Connectivity 5415417-1 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5415417-1 is a BNC connector jack designed for coaxial RF applications requiring 75-ohm impedance. This female socket connector features right-angle panel mount configuration with through-hole solder termination and bulkhead mounting capability. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for continued system support and new design implementations.

Substiute Parts

5415417-1

TE Connectivity AMP ConnectorsIn Stock: 8975415417-1 Datasheet

Current PartRFQ

5415419-1

TE Connectivity AMP ConnectorsIn Stock: 8395415419-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete TE Connectivity 5415417-1 is based on strict electrical and mechanical parameter equivalence. The substitute part 5415419-1 maintains identical specifications across all critical functional parameters: BNC connector style, female jack configuration, 75-ohm impedance, right-angle panel mount through-hole design, solder termination for both contact and shield, 2 GHz maximum frequency, 500 V voltage rating, -55°C to 85°C operating temperature range, 500 mating cycles, and bayonet lock fastening.

The key parameters determining substitution eligibility are:

• Connector style and type (BNC jack, female socket)
• Impedance specification (75 ohms)
• Mounting configuration (panel mount, through hole, right angle)
• Termination method (solder contact and shield)
• Electrical performance envelope (frequency, voltage, temperature)
• Mechanical durability (mating cycles)

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 5415419-1 serves as the direct active equivalent for the obsolete 5415417-1. Both parts maintain identical electrical and mechanical specifications across all critical functional parameters required for BNC 75-ohm coaxial connector applications.

The primary distinction between the parts is product status: 5415417-1 is obsolete while 5415419-1 is active and currently available. The 5415419-1 is supplied in tray packaging, whereas the original part packaging specification was not provided.

A secondary difference exists in center contact plating: the original part features gold plating while the substitute features tin plating. Both plating materials are compatible with solder termination and maintain the electrical performance requirements within the specified operating envelope.

Both parts maintain identical RoHS compliance, REACH status, and export classification (EAR99), ensuring regulatory and compliance continuity. The active status of 5415419-1 provides assured long-term availability and supply chain stability for new designs and ongoing production requirements.

Frequently Asked Questions (FAQ)

Q: Can 5415419-1 be used as a direct replacement for 5415417-1 in existing designs?

A: Yes. The 5415419-1 maintains identical electrical and mechanical specifications across all functional parameters. Both connectors feature BNC jack configuration, 75-ohm impedance, right-angle panel mount through-hole design, solder termination, 2 GHz maximum frequency, 500 V voltage rating, and -55°C to 85°C operating temperature range. Physical form factor and mounting interface are identical.

Q: What is the difference in center contact plating between these parts?

A: The 5415417-1 features gold-plated center contacts while the 5415419-1 features tin-plated center contacts. Both plating materials are compatible with solder termination and provide adequate electrical conductivity and corrosion resistance within the specified operating parameters. The plating difference does not affect connector performance or compatibility.

Q: Are there packaging differences between these parts?

A: The 5415419-1 is supplied in tray packaging. The original 5415417-1 packaging specification was not provided in the available documentation. Tray packaging is standard for active production inventory and does not affect connector functionality or performance.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both 5415417-1 and 5415419-1 are RoHS compliant, REACH affected, and classified under ECCN EAR99 with HTSUS code 8536.69.4010. Regulatory and compliance status is identical between the parts.

Q: Why is 5415417-1 classified as obsolete?

A: The 5415417-1 has been superseded by the 5415419-1 in TE Connectivity's active product portfolio. The 5415419-1 provides identical functionality with the advantage of active production status, ensuring continued availability and supply chain support.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is based on matching connector style (BNC), connector type (jack, female socket), impedance (75 ohms), mounting configuration (panel mount, through hole, right angle), termination method (solder), and electrical performance envelope (frequency, voltage, temperature, mating cycles). The 5415419-1 matches all these critical parameters.

Q: Are the mating cycles and durability specifications identical?

A: Yes. Both parts specify 500 mating cycles, identical operating temperature range (-55°C to 85°C), and identical voltage rating (500 V). Mechanical durability and reliability specifications are equivalent.

Q: Can these connectors be used interchangeably in RF applications up to 2 GHz?

A: Yes. Both connectors maintain 75-ohm impedance and 2 GHz maximum frequency specification, making them suitable for identical RF coaxial applications within this frequency range.