TE Connectivity 5413760-8 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5413760-8 is a BNC connector jack with female socket configuration, designed for 75-ohm coaxial cable applications. This component features crimp termination for both center contact and shield, operates across a temperature range of -55°C to 85°C, and supports frequencies up to 2 GHz. The part is classified as obsolete, necessitating identification of active equivalent alternatives for ongoing procurement and system integration requirements.

Substiute Parts

5413760-8

TE Connectivity AMP ConnectorsIn Stock: 7775413760-8 Datasheet

Current PartRFQ

413760-8

TE Connectivity AMP ConnectorsIn Stock: 1152413760-8 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 5413760-8 is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Impedance: 75 Ohms (mandatory match)
• Frequency maximum: 2 GHz (minimum requirement)
• Voltage rating: 500 V (minimum requirement)
• Insertion loss: 0.15 dB (maximum allowable)

Mechanical Specifications:

• Connector style: BNC (form factor requirement)
• Connector type: Jack, Female Socket (functional requirement)
• Contact termination: Crimp (assembly method requirement)
• Shield termination: Crimp (assembly method requirement)
• Mounting type: Free Hanging (In-Line) (installation requirement)
• Fastening type: Bayonet Lock (mating interface requirement)
• Cable group compatibility: RG-179, 179A, 179B, 187, 187A (cable interface requirement)

Environmental Specifications:

• Operating temperature range: -55°C ~ 85°C (minimum requirement)

Substitute parts must satisfy all parameters listed above. Parts meeting these criteria are classified as parametric equivalents and direct functional replacements.

Parameter Comparison

Engineering Selection Recommendations

The 5413760-8 is classified as obsolete and requires substitution for new procurement activities. The TE Connectivity 413760-8 is a parametric equivalent that satisfies all electrical and mechanical specifications required for direct functional replacement.

Product Status Consideration: The 413760-8 maintains active product status with TE Connectivity, ensuring ongoing availability and manufacturing support. This addresses the primary constraint imposed by the obsolescence of the original 5413760-8.

Compliance Consideration: The main part 5413760-8 carries RoHS Compliant certification. The substitute part 413760-8 is RoHS non-compliant. Selection of the 413760-8 is appropriate only for applications where RoHS compliance is not a regulatory or contractual requirement. For applications requiring RoHS compliance, alternative sources must be evaluated.

Regulatory Consideration: Both parts carry identical ECCN (EAR99) and HTSUS (8536.69.4010) classifications, indicating equivalent export control and tariff treatment.

Package Consideration: The main part includes 5 pieces per package (1 connector, 1 contact, 1 ferrule, 2 sleeves). The substitute part includes 3 pieces per package (1 connector, 1 contact, 1 ferrule). Procurement quantities must account for this packaging difference.

Frequently Asked Questions (FAQ)

Q: Can the 413760-8 be used as a direct replacement for the 5413760-8?

A: The 413760-8 is a parametric equivalent that matches all electrical and mechanical specifications of the 5413760-8. Direct functional replacement is supported for applications where RoHS compliance is not required. For RoHS-compliant applications, the non-compliant status of the 413760-8 must be evaluated against project requirements.

Q: What are the key differences between these two parts?

A: The primary differences are product status (obsolete versus active) and RoHS compliance status (compliant versus non-compliant). All electrical and mechanical parameters are identical. Package contents differ: the 5413760-8 includes 2 sleeves while the 413760-8 does not.

Q: Are the cable compatibility specifications identical?

A: Both parts support the same cable groups: RG-179, 179A, 179B, 187, and 187A. Cable compatibility is identical.

Q: What is the impedance specification for both parts?

A: Both parts are rated at 75 ohms, which is the standard impedance for video and RF applications using BNC connectors.

Q: Do both parts support the same frequency range?

A: Both parts support frequencies up to 2 GHz with identical insertion loss of 0.15 dB.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across the temperature range of -55°C to 85°C, supporting applications in industrial and military environments.

Q: Are the termination methods the same?

A: Both parts use crimp termination for both center contact and shield, requiring identical assembly tooling and procedures.

Q: What is the voltage rating for these connectors?

A: Both parts are rated for 500 volts, supporting standard RF and video signal applications.

Q: How many mating cycles are supported?

A: Both parts support 500 mating cycles, indicating equivalent mechanical durability.

Q: What materials are used in the connector construction?

A: Both parts use zinc body material with nickel finish, beryllium copper center contacts with gold plating, and polyethylene dielectric material.