TE Connectivity 5413524-2 BNC Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5413524-2 is a BNC connector jack designed for RF coaxial applications requiring 50-ohm impedance. This female socket connector features right-angle panel mount configuration with through-hole solder termination and bulkhead mounting capability. The part is classified as obsolete, necessitating identification of active equivalent components for ongoing procurement and design applications. Substitute parts must maintain identical electrical and mechanical specifications to ensure direct interchangeability in existing circuit designs.

Substiute Parts

5413524-2

TE Connectivity AMP ConnectorsIn Stock: 11865413524-2 Datasheet

Current PartRFQ

5413515-2

TE Connectivity AMP ConnectorsIn Stock: 17605413515-2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete TE Connectivity 5413524-2 is based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitute part 5413515-2 qualifies as a direct equivalent because it maintains identical values for the following key parameters:

• Connector style and type (BNC jack, female socket)
• Impedance rating (50 ohms)
• Mounting configuration (panel mount, through-hole, right-angle)
• Termination method (solder contact and shield)
• Maximum frequency (1 GHz)
• Operating temperature range (-55°C ~ 85°C)
• Voltage rating (500 V)
• Mating cycle rating (500)
• Material composition (phosphor bronze center contact, zinc body with nickel finish, gold plating)
• Dielectric material (polymethylpentene)
• Compliance certifications (RoHS compliant, REACH affected, EAR99)

The primary distinction between the main part and substitute is product status: 5413524-2 is obsolete while 5413515-2 is active, making the latter suitable for new procurement and long-term supply chain continuity.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 5413515-2 is the direct parametric equivalent for the obsolete 5413524-2. All electrical performance characteristics, mechanical dimensions, material specifications, and compliance certifications are identical between the two parts. The substitute part carries active product status, ensuring ongoing availability and manufacturer support.

Both parts maintain RoHS compliance and REACH compliance status, satisfying regulatory requirements for current and future applications. The EAR99 export classification and HTSUS tariff code are identical, presenting no additional compliance considerations for procurement or logistics.

The packaging difference (unspecified for 5413524-2 versus bulk for 5413515-2) does not affect functional interchangeability. Selection between these parts should be based on procurement requirements and supply chain availability, with 5413515-2 recommended for new designs and ongoing production due to its active status.

Frequently Asked Questions (FAQ)

Q: Can 5413515-2 be used as a direct replacement for 5413524-2 in existing designs?

A: Yes. The 5413515-2 is a parametric equivalent with identical electrical and mechanical specifications. All critical parameters including impedance, frequency rating, operating temperature, voltage rating, and mating cycle rating are identical. Direct substitution is supported without design modification.

Q: What is the primary reason for substituting 5413524-2?

A: The 5413524-2 is classified as obsolete. The 5413515-2 is an active product from the same manufacturer with identical specifications, ensuring continued availability and manufacturer support for procurement and production.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical RoHS compliance status, REACH compliance status, EAR99 export classification, and HTSUS tariff code. No additional compliance considerations apply to the substitution.

Q: Does the packaging difference affect compatibility?

A: No. The packaging difference (bulk for 5413515-2) does not affect the functional or mechanical characteristics of the connector. Packaging is a procurement and logistics consideration only.

Q: What are the key parameters that define substitution eligibility for this BNC connector?

A: Substitution eligibility is determined by matching the following parameters: connector style (BNC), connector type (jack, female socket), impedance (50 ohms), mounting configuration (panel mount, through-hole, right-angle), termination method (solder), frequency rating (1 GHz), operating temperature range (-55°C ~ 85°C), voltage rating (500 V), and material composition (phosphor bronze contact, zinc body, nickel finish, gold plating, polymethylpentene dielectric).

Q: Can 5413515-2 handle the same environmental conditions as 5413524-2?

A: Yes. Both parts are rated for identical operating temperature range (-55°C ~ 85°C) and moisture sensitivity level (MSL 1, unlimited). Environmental performance is equivalent.

Q: Are there any frequency or impedance limitations with 5413515-2?

A: No. The 5413515-2 maintains the same maximum frequency rating (1 GHz) and impedance specification (50 ohms) as the original part. RF performance characteristics are identical.