TE Connectivity 5413515-9 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5413515-9 is a BNC connector jack designed for coaxial RF applications requiring 50-ohm impedance. This female socket connector features right-angle panel mount configuration with through-hole solder termination and bulkhead mounting capability. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain identical electrical and mechanical specifications for seamless integration into existing designs and production environments.

Substiute Parts

5413515-9

TE Connectivity AMP ConnectorsIn Stock: 9365413515-9 Datasheet

Current PartRFQ

5413515-7

TE Connectivity AMP ConnectorsIn Stock: 9135413515-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete TE Connectivity 5413515-9 is based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitute part 5413515-7 maintains identical performance characteristics including BNC connector style, female socket configuration, 50-ohm impedance, right-angle panel mount through-hole solder termination, 1 GHz maximum frequency, 500-volt rating, and -55°C to 85°C operating temperature range.

The substitution is valid based on the following key parameters:

• Connector Style: BNC (identical)
• Connector Type: Jack, Female Socket (identical)
• Impedance: 50 Ohms (identical)
• Mounting Type: Panel Mount, Through Hole, Right Angle (identical)
• Contact Termination: Solder (identical)
• Shield Termination: Solder (identical)
• Frequency - Max: 1 GHz (identical)
• Voltage Rating: 500 V (identical)
• Operating Temperature: -55°C ~ 85°C (identical)
• Mating Cycles: 500 (identical)

The primary distinction between the main part and substitute is product status: 5413515-9 is obsolete while 5413515-7 is active, with 5413515-7 carrying ROHS3 compliance versus RoHS compliance for the original part.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 5413515-7 serves as a direct parametric equivalent to the obsolete 5413515-9 for all RF coaxial connector applications requiring BNC female socket configuration with 50-ohm impedance and right-angle panel mount through-hole solder termination.

Selection of 5413515-7 is supported by the following factors:

Product Status: The substitute part 5413515-7 maintains active product status, ensuring continued availability and manufacturing support, whereas 5413515-9 is classified as obsolete.

Compliance Certifications: Both parts maintain REACH Unaffected status and EAR99 export classification. The substitute part carries ROHS3 compliance, representing current regulatory alignment compared to the RoHS compliance of the original part.

Electrical and Mechanical Equivalence: All critical parameters including impedance, frequency rating, voltage rating, operating temperature range, and mating cycle specifications are identical between the two parts.

Material and Construction: Both parts utilize identical materials, finishes, and construction methods, including phosphor bronze center contacts with gold plating, zinc body with nickel finish, and polymethylpentene dielectric material.

Moisture Sensitivity: Both parts carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity constraints for storage and handling.

Frequently Asked Questions (FAQ)

Q: Can 5413515-7 be used as a direct replacement for 5413515-9 in existing designs?

A: Yes. The 5413515-7 is a parametric equivalent with identical electrical and mechanical specifications. All critical parameters including connector style, impedance, frequency rating, voltage rating, operating temperature range, and mounting configuration are identical.

Q: What is the primary reason for substituting 5413515-9 with 5413515-7?

A: The 5413515-9 is classified as obsolete, while 5413515-7 is an active product. Substitution ensures continued component availability and manufacturing support for new production and field replacements.

Q: Are there any compliance differences between these parts?

A: Both parts maintain REACH Unaffected and EAR99 classifications. The substitute part 5413515-7 carries ROHS3 compliance, while the original 5413515-9 carries RoHS compliance. Both meet current regulatory requirements.

Q: Do these connectors have identical physical dimensions and mounting footprints?

A: Yes. Both parts feature identical right-angle panel mount through-hole configuration with bulkhead front-side nut mounting, ensuring identical PCB footprints and mechanical compatibility.

Q: What is the maximum operating frequency for these BNC connectors?

A: Both the 5413515-9 and 5413515-7 are rated for maximum frequency of 1 GHz, suitable for RF applications within this bandwidth specification.

Q: Are the solder termination specifications identical between these parts?

A: Yes. Both parts utilize solder termination for both center contact and shield, with identical phosphor bronze center contact material and gold plating specifications.

Q: What is the voltage rating for these connectors?

A: Both parts are rated for 500 volts, suitable for applications requiring this voltage specification.

Q: Do these connectors have identical impedance specifications?

A: Yes. Both the 5413515-9 and 5413515-7 are specified for 50-ohm impedance, standard for RF coaxial connector applications.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across the temperature range of -55°C to 85°C, suitable for industrial and commercial applications within this thermal specification.

Q: Are there inventory considerations when selecting between these parts?

A: The 5413515-9 has 852 pieces in stock, while the 5413515-7 has 824 pieces in stock. However, given the obsolete status of 5413515-9, the active status of 5413515-7 ensures long-term availability for future requirements.