Amphenol ICC 54102-T32-15 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 54102-T32-15 is a rectangular connector header for through-hole mounting, featuring 30 positions arranged in 2 rows with 0.100" (2.54mm) pitch. This BERGSTIK® series connector is designed for board-to-board or cable applications with push-pull fastening and solder termination. The part is currently active in production with 1100 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to component availability, supply chain considerations, or design flexibility within the allowed parameter ranges.

Key Parameters

Parameter	Specification
Connector Type	Header
Contact Type	Male Pin
Number of Positions	30
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Style	Board to Board or Cable
Shrouding	Unshrouded
Contact Shape	Square
Contact Material	Phosphor Bronze
Material Flammability Rating	UL94 V-0
Insulation Color	Black
Moisture Sensitivity Level (MSL)	1 (Unlimited)
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for the 54102-T32-15 are qualified based on the following critical parameters that must remain constant:

Connector type: Header
Contact type: Male Pin
Number of positions: 30
Number of rows: 2
Pitch - mating: 0.100" (2.54mm)
Row spacing - mating: 0.100" (2.54mm)
Mounting type: Through Hole
Termination: Solder
Fastening type: Push-Pull
Style: Board to Board or Cable
Shrouding: Unshrouded
Contact material: Phosphor Bronze
Material flammability rating: UL94 V-0
Insulation color: Black
MSL: 1 (Unlimited)

Variations permitted in substitute parts include contact finish composition, contact length specifications, insulation height, insulation material type, operating temperature range, and RoHS compliance status. These variations do not affect the core mechanical and electrical compatibility of the connector within standard PCB assembly and mating applications.

Parameter Comparison

Parameter	54102-T32-15 (Amphenol ICC)	1-87215-5 (TE Connectivity)	TSW-115-14-G-D-LL (Samtec)	TSW-115-25-G-D (Samtec)	TSW-115-30-S-D (Samtec)
Manufacturer	Amphenol ICC (FCI)	TE Connectivity AMP Connectors	Samtec Inc.	Samtec Inc.	Samtec Inc.
Series	BERGSTIK®	AMPMODU Mod II	TSW	TSW	TSW
Connector Type	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	30	30	30	30	30
Number of Rows	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Kinked Pin, Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Style	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable
Shrouding	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded
Contact Shape	Square	Circular	Square	Square	Square
Contact Finish - Mating	Tin	Gold	Gold	Gold	Gold
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Black	Black	Black	Black
MSL	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Operating Temperature	Not specified	-65°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Inventory (Pcs)	1100	827	856	650	1109

Engineering Selection Recommendations

All substitute parts maintain active product status and meet the core mechanical and electrical requirements for 30-position, 2-row, 0.100" pitch header connectors with through-hole solder termination and push-pull fastening.

The TE Connectivity 1-87215-5 offers ROHS3 compliance with an extended operating temperature range of -65°C to 105°C and gold plating on both mating and post contacts. This part features circular contact geometry and thermoplastic insulation material.

The Samtec TSW series parts (TSW-115-14-G-D-LL, TSW-115-25-G-D, and TSW-115-30-S-D) provide ROHS3 compliance with operating temperature range of -55°C to 125°C and polybutylene terephthalate (PBT) insulation. These parts maintain square contact geometry consistent with the original 54102-T32-15. The TSW series differs primarily in contact post length: TSW-115-14-G-D-LL features 0.110" posts with kinked pin termination, TSW-115-25-G-D features 0.210" posts, and TSW-115-30-S-D features 0.710" posts with tin post finish.

Selection between substitute parts depends on specific application requirements regarding contact post length, operating temperature range, and RoHS compliance mandates. All substitute parts are electrically and mechanically compatible with standard 0.100" pitch connector receptacles.

Frequently Asked Questions (FAQ)

Q: Can the 54102-T32-15 be directly replaced with any of the listed substitute parts?

A: Yes, all listed substitute parts are mechanically and electrically compatible for applications requiring 30-position, 2-row, 0.100" pitch header connectors with through-hole solder termination. Compatibility is based on matching pitch, position count, row configuration, mounting type, and fastening mechanism. Physical board layout and mating connector specifications must be verified to ensure proper fit.

Q: What is the primary difference between the Amphenol ICC 54102-T32-15 and the TE Connectivity 1-87215-5?

A: The primary differences are contact finish (tin versus gold), contact shape (square versus circular), insulation material (not specified versus thermoplastic), and RoHS compliance status (non-compliant versus ROHS3 compliant). The TE Connectivity part also specifies an operating temperature range of -65°C to 105°C, whereas the original part does not provide this specification.

Q: How do the Samtec TSW series parts differ from each other?

A: The three Samtec TSW series parts differ in contact post length and post finish. TSW-115-14-G-D-LL features 0.110" posts with kinked pin termination and gold post finish. TSW-115-25-G-D features 0.210" posts with gold post finish. TSW-115-30-S-D features 0.710" posts with tin post finish. All three maintain identical mating contact length, pitch, position count, and row configuration.

Q: Does contact post length affect connector compatibility?

A: Contact post length does not affect compatibility with standard 0.100" pitch receptacles. Post length selection is determined by PCB thickness and assembly requirements. Longer posts accommodate thicker PCBs or applications requiring extended solder joint length. Post length must be verified against specific PCB design specifications.

Q: Are there RoHS compliance considerations when substituting parts?

A: The original 54102-T32-15 is RoHS non-compliant, while all listed substitute parts are ROHS3 compliant. If RoHS compliance is required for the application, any of the substitute parts satisfy this requirement. If RoHS non-compliance is mandated by design specifications, the original part must be retained.

Q: What is the significance of contact finish differences?

A: Contact finish affects corrosion resistance and mating force characteristics. Tin finish provides standard performance for general applications. Gold finish provides enhanced corrosion resistance and lower contact resistance, suitable for applications requiring extended shelf life or harsh environmental conditions. Contact finish selection depends on application environment and performance requirements.

Q: Can the 54102-T32-15 be used interchangeably with substitute parts in existing designs?

A: Interchangeability depends on specific design requirements. All parts share identical pitch, position count, row spacing, and mounting type. Differences in contact post length, operating temperature range, and RoHS compliance must be evaluated against design specifications. Physical verification of connector fit and mating force characteristics is recommended before production implementation.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message