54102-T06-33 Equivalent & Substitute Parts

Part Overview

The 54102-T06-33 is a rectangular connector header manufactured by Amphenol ICC (FCI) under the BERGSTIK® series. This through-hole connector features 66 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing, designed for board-to-board or cable applications. The connector is currently in active production status with 1036 units in stock. Alternative components may be required due to supply chain considerations, manufacturing discontinuation, or specific application requirements.

Substiute Parts

54102-T06-33

Amphenol ICC (FCI)In Stock: 107254102-T06-33 Datasheet

Current PartRFQ

TD-133-G-A

Samtec Inc.In Stock: 1109TD-133-G-A Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 54102-T06-33 is determined by the following critical parameters:

• Position Count & Row Configuration: 66 positions in 2-row arrangement
• Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
• Connector Classification: Header type with male pin contacts
• Mounting & Termination: Through-hole solder termination
• Physical Interface: Board-to-board or cable compatibility

The substitute part TD-133-G-A from Samtec Inc. satisfies all primary functional requirements. Both connectors share identical position counts, pitch specifications, row configurations, mounting methodology, and termination approach. Differences exist in contact finish material (gold versus tin) and RoHS compliance status, which represent secondary characteristics that do not affect core electrical or mechanical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

Both the 54102-T06-33 and TD-133-G-A are active production components with unlimited moisture sensitivity ratings. The primary distinction is RoHS compliance status: the Amphenol ICC part is RoHS non-compliant, while the Samtec part meets ROHS3 compliance requirements. Selection between these components should be based on regulatory requirements applicable to the end application. The contact finish difference (tin versus gold) reflects manufacturing specifications but does not affect mechanical or electrical interchangeability for standard board-to-board applications. Both components are available in production quantities.

Frequently Asked Questions (FAQ)

Q: Are the 54102-T06-33 and TD-133-G-A mechanically interchangeable?

A: Yes. Both connectors share identical position counts (66), pitch specifications (0.100"), row configurations (2 rows), mounting type (through-hole), and termination method (solder). Physical dimensions and mating interfaces are compatible.

Q: What is the difference between tin and gold contact finishes?

A: Contact finish is a secondary characteristic that does not affect mechanical interchangeability. Tin and gold finishes are both suitable for solder termination applications. Selection may depend on specific environmental or corrosion resistance requirements not specified in the base parameters.

Q: Does RoHS compliance affect substitution eligibility?

A: RoHS compliance is a regulatory classification, not a functional parameter. The TD-133-G-A (ROHS3 compliant) is substitutable for the 54102-T06-33 (RoHS non-compliant) from a technical standpoint. Regulatory suitability depends on end-application requirements and regional standards.

Q: Are both parts available in production quantities?

A: Yes. The 54102-T06-33 has 1036 units in stock (bulk packaging), and the TD-133-G-A has 1054 units in stock (tube packaging). Packaging format differs but does not affect component functionality.

Q: What is the moisture sensitivity level for both parts?

A: Both connectors are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.