Equivalent & Substitute Parts for 54101-G0832LF

Part Overview

The 54101-G0832LF is an active rectangular connector header manufactured by Amphenol ICC (FCI) from the BERGSTIK® series. This through-hole vertical header connector features 32 positions at 0.100" (2.54mm) pitch and is designed for board-to-board applications. The part is RoHS Compliant and carries Moisture Sensitivity Level 1 (Unlimited), making it suitable for standard industrial and commercial electronics assembly. Equivalent substitute parts are available from alternative manufacturers to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

54101-G0832LF

Amphenol ICC (FCI)In Stock: 80354101-G0832LF Datasheet

Current PartRFQ

350-40-132-00-001000

Mill-Max Manufacturing Corp.In Stock: 985350-40-132-00-001000 Datasheet

MFR RecommendedRFQ

TS-132-G-AA

Samtec Inc.In Stock: 3411TS-132-G-AA Datasheet

MFR RecommendedRFQ

TS-132-T-AA

Samtec Inc.In Stock: 1079TS-132-T-AA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 54101-G0832LF is determined by strict alignment of core electrical and mechanical parameters. The following criteria establish functional equivalence:

Primary Substitution Criteria:

• Connector Type: Header (male pin contact)
• Number of Positions: 32
• Pitch - Mating: 0.100" (2.54mm)
• Number of Rows: 1
• Mounting Type: Through Hole
• Termination: Solder
• Style: Board to Board
• Shrouding: Unshrouded
• Fastening Type: Push-Pull

All three substitute parts (350-40-132-00-001000, TS-132-G-AA, and TS-132-T-AA) meet these core requirements. Variations in contact finish, contact material, and dimensional tolerances are within acceptable ranges for board-to-board header connector applications and do not prevent functional substitution in standard PCB assembly environments.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are active products with current manufacturing status and full compliance certifications. Selection among these equivalents should be based on the following factors:

350-40-132-00-001000 (Mill-Max Manufacturing Corp.): This part is ROHS3 Compliant and REACH Unaffected. It features tin contact finish with 200.0µin (5.08µm) thickness and brass alloy contact material. Packaging is supplied in tube format. This option is suitable for applications where tin finish is preferred and REACH compliance status is a consideration.

TS-132-G-AA (Samtec Inc.): This part is ROHS3 Compliant and REACH Affected. It features gold contact finish with 20.0µin (0.51µm) thickness. Packaging is supplied in tube format. This option is suitable for applications requiring gold-plated contacts and where REACH Affected status is acceptable.

TS-132-T-AA (Samtec Inc.): This part is ROHS3 Compliant and REACH Unaffected. It features tin contact finish with 200.0µin (5.08µm) thickness. Packaging is supplied in tube format. This option is suitable for applications where tin finish is preferred and REACH Unaffected status is required.

All parts carry Moisture Sensitivity Level 1 (Unlimited) and are classified under the same ECCN (EAR99) and HTSUS (8536.69.4040) codes as the original part.

Frequently Asked Questions (FAQ)

Q: What makes these parts functionally equivalent to the 54101-G0832LF?

A: All substitute parts share the same core connector specifications: 32-position header, 0.100" (2.54mm) pitch, single row, through-hole mounting, solder termination, board-to-board style, unshrouded design, and push-pull fastening. These parameters define the mechanical and electrical interface compatibility required for direct substitution in PCB applications.

Q: Are there differences in contact finish between the original and substitute parts?

A: Yes. The 54101-G0832LF features gold or gold GXT™ finish. The Mill-Max 350-40-132-00-001000 and Samtec TS-132-T-AA use tin finish. The Samtec TS-132-G-AA uses gold finish. Contact finish selection depends on application requirements for corrosion resistance, solderability, and mating cycle durability.

Q: What is the difference between the two Samtec options (TS-132-G-AA and TS-132-T-AA)?

A: Both are identical 32-position headers with the same mechanical specifications. The primary difference is contact finish: TS-132-G-AA uses gold finish (20.0µin thickness), while TS-132-T-AA uses tin finish (200.0µin thickness). Additionally, TS-132-G-AA is REACH Affected, while TS-132-T-AA is REACH Unaffected.

Q: Do packaging differences affect substitution?

A: The original part is supplied in bag packaging, while all substitute parts are supplied in tube packaging. This affects handling and storage but does not impact functional compatibility. Tube packaging provides improved protection during transport and storage.

Q: Are all parts RoHS compliant?

A: Yes. The original part is RoHS Compliant. All three substitute parts are ROHS3 Compliant, which represents the current RoHS standard and is fully compatible with RoHS Compliant requirements.

Q: What is the inventory status of these parts?

A: The original 54101-G0832LF has 775 pieces in stock. Substitute inventory levels are: 350-40-132-00-001000 (883 pieces), TS-132-G-AA (3335 pieces), and TS-132-T-AA (1037 pieces). All parts are listed as new original stock.