Equivalent & Substitute Parts for 54-00282

Part Overview

The 54-00282 is a USB 2.0 micro B receptacle connector manufactured by Tensility International Corp, designed for surface mount and through-hole applications with right-angle orientation. This connector features a 5-position configuration with horizontal mounting and solder termination, suitable for embedded systems requiring waterproof connectivity. The part is currently active in production with 1357 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling seamless integration into existing designs without functional compromise.

Substiute Parts

54-00282

Tensility International CorpIn Stock: 146454-00282 Datasheet

Current PartRFQ

54-00283

Tensility International CorpIn Stock: 175354-00283 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 54-00282 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part 54-00283 qualifies as a direct equivalent based on the following alignment criteria:

Electrical Parameters: Both parts maintain identical USB 2.0 specifications, 5-position contact configuration, 0.5A and 3A current ratings, and 30VDC voltage rating. Shielding, contact finish (gold), and waterproof ingress protection (IPX7) are identical.

Mechanical Parameters: Both connectors feature identical mounting configurations (surface mount and through-hole), right-angle orientation, horizontal mounting feature, and solder termination. Operating temperature range (-40°C ~ 85°C) and mating cycle rating (5000) are equivalent.

Environmental & Compliance: Both parts share identical RoHS3 compliance status, REACH unaffected designation, and moisture sensitivity level (MSL 1 - Unlimited).

Distinguishing Feature: The 54-00283 includes a board guide feature in addition to solder retention, whereas the 54-00282 features solder retention tab only. This represents an enhancement rather than a functional deviation.

Parameter Comparison

Engineering Selection Recommendations

Both 54-00282 and 54-00283 are active production parts from Tensility International Corp with full ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for current and future applications. Selection between these parts is based on mechanical design requirements rather than electrical performance.

The 54-00282 is appropriate for designs where solder retention alone meets assembly requirements and board space is constrained. The 54-00283 is suitable for applications requiring enhanced mechanical stability through board guide integration, particularly in high-vibration environments or where additional assembly robustness is specified.

Both connectors support identical electrical performance across USB 2.0 data transfer, current delivery (0.5A and 3A ratings), and environmental protection (IPX7 waterproof rating). The -40°C to 85°C operating temperature range and 5000 mating cycle rating are equivalent, ensuring comparable service life in equivalent applications.

Inventory availability should be considered: 54-00282 has 1357 units in stock, while 54-00283 has 1682 units in stock. Both are packaged in Tape & Reel format suitable for automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Can 54-00283 be used as a direct replacement for 54-00282 in existing designs?

A: Yes. The 54-00283 is electrically and mechanically equivalent to the 54-00282 across all critical parameters including USB 2.0 specification, contact configuration, current and voltage ratings, operating temperature range, and waterproof ingress protection. The addition of a board guide feature in the 54-00283 represents an enhancement that does not compromise compatibility.

Q: What is the functional difference between the solder retention tab in 54-00282 and the board guide plus solder retention in 54-00283?

A: The solder retention tab in 54-00282 provides mechanical support during solder reflow. The 54-00283 includes both a board guide and solder retention, offering additional mechanical stability by aligning the connector to the PCB during assembly. Both approaches achieve equivalent solder joint integrity; the board guide provides supplementary positioning control.

Q: Are both parts suitable for waterproof applications?

A: Yes. Both 54-00282 and 54-00283 carry IPX7 waterproof ingress protection rating, qualifying them for applications requiring moisture resistance within the IPX7 specification limits.

Q: What is the operating temperature range for both connectors?

A: Both parts operate across -40°C to 85°C, supporting applications in industrial, automotive, and consumer environments within this thermal envelope.

Q: How many mating cycles are supported by each connector?

A: Both 54-00282 and 54-00283 support 5000 mating cycles, providing equivalent mechanical durability for repeated connection and disconnection operations.

Q: Are both parts RoHS compliant?

A: Yes. Both 54-00282 and 54-00283 are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and distribution.

Q: What packaging format is used for both parts?

A: Both connectors are supplied in Tape & Reel (TR) packaging, suitable for automated pick-and-place assembly processes in high-volume manufacturing environments.

Q: Can these connectors handle the full 3A current rating continuously?

A: Both parts are rated for 0.5A and 3A current delivery. Continuous operation at maximum current rating should be evaluated against thermal dissipation characteristics and application-specific duty cycles. The 30VDC voltage rating applies across all operating conditions.