LED CBI 5MM YELLOW THROUGH HOLE 5381H7

Part Overview

The VCC 5381H7 is a circuit board indicator LED featuring a 5mm yellow tinted lens with domed top design. This component operates at 2.1V with a 10mA rated current and delivers 10 millicandela brightness output. The part is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement continuity. Substitute components must maintain compatibility with the original electrical specifications and physical form factor requirements.

Substiute Parts

5381H7

Visual Communications Company - VCCIn Stock: 7395381H7 Datasheet

Current PartRFQ

6052311110F

DialightIn Stock: 10616052311110F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute components for the 5381H7 are identified based on the following critical parameters:

Electrical Compatibility Criteria:

• Color: Yellow (585nm wavelength range)
• Forward Voltage: 2.1V nominal (tolerance range acceptable)
• Current Rating: 10mA minimum operating specification
• Brightness: Millicandela rating sufficient for circuit board indication function

Physical Compatibility Criteria:

• Lens Size: 5mm form factor
• Mounting: Through hole termination style
• Configuration: Single LED per package

Compliance Criteria:

• RoHS3 compliance required
• MSL 1 rating (unlimited moisture sensitivity)
• REACH unaffected status

The Dialight 6052311110F qualifies as a substitute based on matching yellow color specification, compatible voltage range (2V vs. 2.1V), through hole mounting capability, and equivalent compliance certifications. The substitute operates at 15mA maximum current with 53mcd brightness output, representing higher performance parameters within the same functional category.

Parameter Comparison

Engineering Selection Recommendations

Primary Consideration: Product Status

The VCC 5381H7 is classified as obsolete. The Dialight 6052311110F maintains active production status, ensuring long-term availability and supply chain continuity.

Electrical Compatibility

Both components operate within compatible voltage ranges (2.1V vs. 2V forward voltage). The substitute's 15mA maximum current rating exceeds the original 10mA specification, indicating higher performance capability. The 53mcd brightness output of the substitute significantly exceeds the original 10mcd rating, providing enhanced visibility for circuit board indication applications.

Compliance Alignment

Both components maintain ROHS3 compliance and MSL 1 (unlimited) moisture sensitivity ratings. Both are classified under ECCN EAR99 and HTSUS 8541.41.0000, confirming regulatory equivalence.

Physical Form Factor Differences

The original component features through hole mounting with a domed lens top. The substitute is specified as a panel indicator with flat top lens and recessed mounting. These differences require mechanical design evaluation for specific application contexts. Through hole mounting compatibility cannot be confirmed from available substitute specifications.

Selection Basis

Component selection should prioritize the Dialight 6052311110F for new designs requiring active production support and compliance assurance. For applications requiring identical through hole mounting and domed lens geometry, mechanical compatibility must be independently verified against PCB design requirements.

Frequently Asked Questions (FAQ)

Q: Can the Dialight 6052311110F directly replace the VCC 5381H7 in existing circuit board designs?

A: Electrical compatibility is confirmed within the specified voltage and current parameters. However, the substitute features panel mount configuration versus through hole mounting, and flat top lens versus domed top lens. Physical compatibility requires verification against specific PCB layout and mechanical mounting requirements.

Q: What are the key electrical differences between these components?

A: The substitute operates at 2V forward voltage (versus 2.1V original) and 15mA maximum current (versus 10mA original). The substitute delivers 53mcd brightness compared to the original 10mcd. These differences represent enhanced performance specifications within the yellow LED indicator category.

Q: Are both components compliant with current environmental regulations?

A: Yes. Both components maintain ROHS3 compliance, MSL 1 rating, and REACH unaffected status. Regulatory equivalence is confirmed.

Q: Why is the original component classified as obsolete?

A: The VCC 5381H7 is no longer in active production. The Dialight 6052311110F represents an actively manufactured alternative within the yellow LED circuit board indicator category.

Q: What mounting differences exist between these components?

A: The original 5381H7 is specified for through hole PCB mounting. The Dialight 6052311110F is configured as a panel indicator with recessed mounting. Application-specific mounting requirements must be evaluated independently.

Q: Are there wavelength differences between the yellow specifications?

A: The original component specifies 585nm peak wavelength. The substitute wavelength is not provided in available specifications. Both are classified as yellow LEDs within standard yellow spectrum ranges.