LED Circuit Board Indicator 5380H5 Equivalent & Substitute Parts

Part Overview

The VCC 5380H5 is a 5mm through-hole right-angle LED circuit board indicator with green diffused, tinted lens. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing design requirements and procurement needs. The 5380H5 operates at 2.2V with 10mA current rating and 10mcd brightness output, designed for standard PCB mounting applications requiring green status indication.

Substiute Parts

5380H5

Visual Communications Company - VCCIn Stock: 10955380H5 Datasheet

Current PartRFQ

5505205F

DialightIn Stock: 22655505205F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete VCC 5380H5 is determined by strict alignment of the following critical parameters:

Mechanical Compatibility:

• Lens size: 5mm, T-1 3/4 form factor
• Mounting type: Through hole, right angle configuration
• Lens style: Round with domed top

Optical Compatibility:

• Color: Green
• Wavelength - peak: 563nm
• Lens type: Diffused, tinted

Electrical Compatibility:

• Voltage rating: 2.2V
• Configuration: Single LED

Regulatory Compliance:

• RoHS3 compliance required
• MSL rating: 1 (Unlimited)

The Dialight 5505205F meets all mechanical, optical, and electrical compatibility criteria. Variations in current rating (10mA vs. 20mA) and brightness output (10mcd vs. 34mcd) represent performance enhancements within the same form factor and do not preclude substitution when circuit design accommodates the higher current specification.

Parameter Comparison

Engineering Selection Recommendations

The Dialight 5505205F is the qualified substitute for the obsolete VCC 5380H5 based on the following engineering criteria:

Mechanical Fit: Both components share identical 5mm, T-1 3/4 form factor with right-angle through-hole mounting, ensuring direct PCB footprint compatibility without layout modification.

Optical Performance: Identical green color specification (563nm peak wavelength) and diffused, tinted lens type ensure equivalent visual appearance and light distribution characteristics in circuit board indicator applications.

Electrical Compatibility: Both components operate at 2.2V nominal voltage. The 5505205F operates at 20mA versus the 5380H5 at 10mA. Circuit designs must accommodate the higher current specification through appropriate series resistor adjustment or current-limiting circuit modification.

Regulatory Compliance: Both components maintain ROHS3 compliance, MSL rating 1 (unlimited moisture sensitivity), and REACH unaffected status, satisfying environmental and regulatory requirements for equivalent substitution.

Product Status: The 5505205F is active production status, ensuring long-term availability and supply chain continuity compared to the obsolete 5380H5.

Frequently Asked Questions (FAQ)

Q: Can the Dialight 5505205F directly replace the VCC 5380H5 without PCB modification?

A: Yes. Both components share identical 5mm, T-1 3/4 form factor and right-angle through-hole mounting configuration. Direct PCB footprint compatibility is confirmed. Circuit design must accommodate the 5505205F's 20mA current specification through appropriate series resistor recalculation.

Q: What is the impact of the higher current rating (20mA vs. 10mA) on circuit design?

A: The 5505205F requires 20mA nominal current compared to the 5380H5's 10mA specification. Series resistor values must be recalculated using Ohm's law: R = (V_supply - V_led) / I_led. For equivalent brightness control, circuit designers must adjust current-limiting resistor values accordingly.

Q: Are the optical characteristics identical between these two components?

A: Yes. Both components feature green color specification at 563nm peak wavelength with diffused, tinted lens type and round domed top style. The 5505205F provides higher brightness output (34mcd vs. 10mcd), which may require optical diffusion adjustment in applications sensitive to brightness levels.

Q: Do both components meet the same regulatory and compliance standards?

A: Yes. Both the VCC 5380H5 and Dialight 5505205F are ROHS3 compliant, carry MSL rating 1 (unlimited), and are REACH unaffected. Regulatory substitution is fully supported.

Q: What is the viewing angle specification for the 5505205F?

A: The Dialight 5505205F specifies a 50° viewing angle. The VCC 5380H5 viewing angle is not specified in available documentation. For applications requiring specific viewing angle characteristics, this parameter should be evaluated against application requirements.

Q: Is the 5505205F available in the same packaging as the 5380H5?

A: The 5505205F is supplied in bulk packaging. Original packaging specifications for the 5380H5 are not provided in available documentation. Packaging format should be confirmed with supplier for procurement and handling requirements.