Skyworks Solutions Si536 156.2539 MHz LVDS Oscillator (536BC000335DG)

Part Overview

The 536BC000335DG is an XO (Standard) crystal oscillator manufactured by Skyworks Solutions Inc., operating at 156.2539 MHz with LVDS output. This component is designed for applications requiring precision frequency generation with enable/disable functionality at 3.3V supply voltage. The part is currently in active production status with 937 units available in stock. Alternative models may be required when frequency specifications differ from the primary application requirement or when supply constraints necessitate component substitution within compatible parameter ranges.

Substiute Parts

536BC000335DG

Skyworks Solutions Inc.In Stock: 1008536BC000335DG Datasheet

Current PartRFQ

535BC100M000DG

Skyworks Solutions Inc.In Stock: 1321535BC100M000DG Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 535BC100M000DG qualifies as a direct substitute based on the following matching parameters:

• Output Type: LVDS (identical)
• Supply Voltage: 3.3V (identical)
• Frequency Stability: ±7ppm (identical)
• Operating Temperature Range: -40°C to 85°C (identical)
• Current Supply (Max): 98mA (identical)
• Current Supply (Disable): 75mA (identical)
• Package Type: 6-SMD, No Lead (identical)
• Package Dimensions: 7.00mm L x 5.00mm W x 1.80mm H (identical)
• Packaging Format: Strip (identical)
• Moisture Sensitivity Level: 1 (Unlimited) (identical)
• Function: Enable/Disable (identical)
• Manufacturer: Skyworks Solutions Inc. (identical)

The primary difference is the output frequency: 535BC100M000DG operates at 100 MHz versus 156.2539 MHz for the primary part. Substitution is valid only when the application circuit can accommodate the 100 MHz frequency specification.

Parameter Comparison

Engineering Selection Recommendations

Both the 536BC000335DG and 535BC100M000DG are active production components from Skyworks Solutions Inc. with identical electrical and mechanical specifications except for output frequency. Selection between these parts depends solely on the frequency requirement of the target application circuit.

The 536BC000335DG (156.2539 MHz) is the primary specification. The 535BC100M000DG (100 MHz) serves as a substitute only when the application design operates at 100 MHz frequency. Both parts carry identical compliance certifications (ECCN: EAR99; HTSUS: 8542.39.0001) and moisture sensitivity ratings, ensuring equivalent reliability and handling requirements.

Frequently Asked Questions (FAQ)

Q: Can the 535BC100M000DG replace the 536BC000335DG in any application?

A: No. The 535BC100M000DG operates at 100 MHz while the 536BC000335DG operates at 156.2539 MHz. Substitution is valid only when the application circuit is designed to operate at 100 MHz frequency. The frequency difference is a functional parameter that determines circuit operation and cannot be overlooked.

Q: Are the physical packages identical between these two parts?

A: Yes. Both parts use 6-SMD, No Lead packaging with identical dimensions of 7.00mm length x 5.00mm width x 1.80mm maximum seated height. They are supplied in strip packaging format and have identical PCB footprints.

Q: Do these parts have the same electrical characteristics?

A: Both parts share identical supply voltage (3.3V), frequency stability (±7ppm), operating temperature range (-40°C to 85°C), maximum supply current (98mA), disable current (75mA), and LVDS output type. The only electrical difference is the output frequency specification.

Q: What is the moisture sensitivity level for these oscillators?

A: Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling procedures apply without special dry-pack requirements.

Q: Are both parts currently available?

A: Yes. The 536BC000335DG has 937 units in stock, and the 535BC100M000DG has 1235 units in stock. Both are active production components.