TE Connectivity AMP Connectors 536510-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 536510-3 is a 96-position Futurebus receptacle connector designed for board edge, through-hole, right-angle mounting applications. This connector features female sockets with gold-plated contacts and is rated for operating temperatures between -55°C and 125°C at 30V. The part is classified as Active product status and is manufactured within the Z-PACK series. Equivalent and substitute parts are identified to provide procurement flexibility, ensure supply chain continuity, and accommodate varying compliance requirements across different manufacturing environments and regulatory jurisdictions.

Substiute Parts

536510-3

TE Connectivity AMP ConnectorsIn Stock: 1018536510-3 Datasheet

Current PartRFQ

5536510-3

TE Connectivity AMP ConnectorsIn Stock: 29025536510-3 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of backplane connectors within the Futurebus category is determined by strict equivalence across electrical and mechanical parameters. The primary criteria for substitution are:

Critical Matching Parameters:

• Connector type (Receptacle, Female Sockets)
• Connector style (Futurebus)
• Number of positions (96)
• Pitch specification (0.079" / 2.00mm)
• Number of rows (4)
• Mounting configuration (Board Edge, Through Hole, Right Angle)
• Termination method (Solder)
• Contact finish (Gold)
• Operating temperature range (-55°C ~ 125°C)
• Voltage rating (30V)
• Flammability rating (UL94 V-0)

The substitute part 5536510-3 maintains complete electrical and mechanical compatibility with the primary part 536510-3. Both parts are manufactured by TE Connectivity AMP Connectors within the Z-PACK series and share identical functional specifications. Substitution is valid based on parameter equivalence and does not require design modification or board-level changes.

Parameter Comparison

Engineering Selection Recommendations

Both the 536510-3 and 5536510-3 are Active product status connectors manufactured by TE Connectivity AMP Connectors and are electrically and mechanically equivalent for Futurebus backplane applications. Selection between these parts is determined by compliance and regulatory requirements specific to the end application.

For applications requiring RoHS3 compliance: The 5536510-3 substitute part carries explicit ROHS3 Compliant certification and is the appropriate selection for designs subject to RoHS3 regulatory frameworks.

For applications with REACH compliance requirements: The 536510-3 main part carries REACH Affected status, providing explicit regulatory documentation. The 5536510-3 substitute lists REACH status as Vendor Undefined, which may require additional supplier verification for REACH compliance documentation.

For general procurement: Both parts maintain identical electrical performance, mechanical fit, and thermal specifications. Selection can be based on inventory availability, compliance documentation requirements, and supply chain considerations. The 5536510-3 currently maintains higher inventory levels (2830 Pcs) compared to the 536510-3 (908 Pcs).

Frequently Asked Questions (FAQ)

Q: Are the 536510-3 and 5536510-3 interchangeable on the same PCB?

A: Yes. Both parts are electrically and mechanically equivalent Futurebus receptacle connectors with identical pin counts (96), pitch (0.079" / 2.00mm), mounting configuration (board edge, through-hole, right-angle), and contact specifications. No PCB design modifications are required for substitution.

Q: What is the difference between these two part numbers?

A: The primary differences are RoHS compliance status and REACH regulatory documentation. The 5536510-3 carries ROHS3 Compliant certification, while the 536510-3 is marked as Not applicable for RoHS. The 536510-3 explicitly lists REACH Affected status, while the 5536510-3 lists REACH status as Vendor Undefined. All electrical and mechanical specifications are identical.

Q: Which part should I select for a new design?

A: Selection depends on regulatory requirements. For designs requiring RoHS3 compliance, use 5536510-3. For designs requiring explicit REACH compliance documentation, use 536510-3. Both parts are Active status and suitable for new designs.

Q: Are both parts available in the same packaging?

A: Yes. Both the 536510-3 and 5536510-3 are supplied in Tube packaging, ensuring consistent handling and storage requirements.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across the identical temperature range of -55°C to 125°C, suitable for industrial and commercial backplane applications.

Q: Can these connectors be used in 30V applications?

A: Yes. Both the 536510-3 and 5536510-3 are rated for 30V maximum voltage and are suitable for applications within this specification.

Q: What contact finish is used on these connectors?

A: Both parts feature gold-plated contacts, providing corrosion resistance and reliable electrical performance in board edge receptacle applications.

Q: Are these connectors suitable for through-hole soldering?

A: Yes. Both parts are designed for through-hole solder termination on PCBs with board edge mounting configuration and right-angle orientation.