TE Connectivity 536475-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 536475-1 is a 96-position DIN plug connector for backplane applications, featuring male pins with gold plating, right-angle through-hole mounting, and solder termination. This connector is part of the Eurocard series and operates across the industrial temperature range of -55°C to 125°C. The part maintains active product status and is currently available in inventory.

Substitute parts are identified to address packaging preferences, compliance requirements, or inventory availability while maintaining electrical and mechanical compatibility with the original specification.

Substiute Parts

536475-1

TE Connectivity AMP ConnectorsIn Stock: 817536475-1 Datasheet

Current PartRFQ

5536475-1

TE Connectivity AMP ConnectorsIn Stock: 10555536475-1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between TE Connectivity 536475-1 and 5536475-1 is based on electrical and mechanical parameter equivalence. Both parts share identical specifications across all critical substitution criteria:

Matching Parameters:

• Connector type, gender, and pin configuration (96-position plug, male pins)
• Physical dimensions and mounting geometry (right-angle, through-hole, 0.100" pitch, 3-row configuration)
• Electrical properties (gold contact finish, solder termination)
• Environmental operating range (-55°C to 125°C)
• Insulation material composition (polymer thermoplastic, glass filled)
• Series designation (Eurocard, Style C, Level/Class 2)

The primary distinction between these parts is packaging format: 536475-1 is supplied in tube packaging, while 5536475-1 is supplied in bulk packaging. Additionally, 5536475-1 carries RoHS compliance certification, whereas 536475-1 is RoHS non-compliant.

Parameter Comparison

Engineering Selection Recommendations

536475-1 (Tube Packaging): Select this part number when tube packaging is required for component handling, storage, or assembly line integration. This configuration is suitable for applications where individual connector protection during transport and handling is prioritized.

5536475-1 (Bulk Packaging, RoHS Compliant): Select this part number for high-volume production environments where bulk packaging reduces material waste and handling costs. This part is the appropriate choice for applications subject to RoHS compliance requirements or when regulatory documentation must demonstrate compliance with restriction of hazardous substances directives.

Both parts are electrically and mechanically equivalent and maintain identical performance characteristics across all operating parameters. Selection between these part numbers should be based on packaging requirements and regulatory compliance obligations specific to the end application.

Frequently Asked Questions (FAQ)

Q: Are 536475-1 and 5536475-1 electrically interchangeable?

A: Yes. Both parts are electrically equivalent. They share identical connector type, pin configuration, pitch, contact finish, and operating temperature range. Electrical performance and signal integrity are equivalent.

Q: What is the difference between tube and bulk packaging?

A: Tube packaging supplies individual connectors in protective tubes, suitable for smaller quantities and applications requiring component-level protection. Bulk packaging supplies connectors in larger quantities without individual tube protection, reducing packaging material and cost per unit for high-volume applications.

Q: Which part should I select for RoHS-compliant applications?

A: Select 5536475-1, which carries RoHS compliance certification. The original 536475-1 is RoHS non-compliant and should not be used in applications requiring RoHS compliance documentation.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts feature identical mounting geometry, right-angle orientation, through-hole configuration, and 0.100" (2.54mm) pitch. PCB footprints are identical.

Q: Can I use 5536475-1 as a direct replacement for 536475-1 on existing PCBs?

A: Yes. The parts are mechanically and electrically equivalent with identical PCB mounting requirements. No design changes or PCB modifications are necessary.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -55°C to 125°C, suitable for industrial and extended temperature applications.

Q: Are there any differences in contact reliability or durability?

A: No differences are specified. Both parts feature gold contact finish and identical insulation materials, providing equivalent contact reliability and durability characteristics.