LED Circuit Board Indicator 5361M1/5 Equivalent & Substitute Parts

Part Overview

The VCC 5361M1/5 is a dual-color LED circuit board indicator featuring integrated green and red LEDs in a 3mm T-1 through-hole right-angle configuration. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing design support and procurement continuity. The part operates at 30mA with diffused white lens technology and meets ROHS3 compliance requirements.

Substiute Parts

5361M1/5

Visual Communications Company - VCCIn Stock: 8035361M1/5 Datasheet

Current PartRFQ

H190C-3

Bivar Inc.In Stock: 1105H190C-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 5361M1/5 is determined by the following critical parameters:

Electrical Compatibility:

• Dual-color green/red configuration with single LED operation
• Operating current of 30mA
• Voltage ratings within acceptable tolerance (2.1V Green, 2V Red)

Mechanical Compatibility:

• Through-hole right-angle mounting orientation
• Diffused white lens technology
• Round domed top lens style

Compliance Requirements:

• ROHS3 compliance certification
• MSL rating of 1 (unlimited moisture sensitivity)

The Bivar H190C-3 qualifies as a substitute based on matching electrical current (30mA), dual-color configuration, through-hole right-angle mounting, diffused white lens type, and equivalent compliance certifications. Physical differences in lens size (5mm vs. 3mm) and millicandela ratings represent design trade-offs that must be evaluated within specific application contexts.

Parameter Comparison

Engineering Selection Recommendations

Primary Consideration - Product Status: The 5361M1/5 is classified as obsolete. The H190C-3 from Bivar Inc. maintains active production status, ensuring long-term availability and supply chain continuity for new designs and ongoing production requirements.

Compliance Alignment: Both components meet ROHS3 compliance and carry MSL rating 1 (unlimited moisture sensitivity), satisfying regulatory and environmental requirements without modification to assembly or storage procedures.

Electrical Performance: Operating current specifications are identical at 30mA. Voltage ratings show minimal variance (0.1V on green channel), remaining within standard component tolerance ranges. Both components support dual-color green/red operation through single LED configuration.

Physical Integration: The H190C-3 maintains through-hole right-angle mounting orientation, preserving PCB layout compatibility. The lens size increase from 3mm to 5mm requires PCB footprint verification. The higher millicandela rating (35mcd vs. 5mcd) provides increased luminous intensity, which may necessitate current-limiting resistor adjustment in circuit design.

Wavelength Characteristics: Green wavelength variance (562nm to 568nm) and red wavelength variance (650nm to 635nm) remain within perceptually equivalent ranges for indicator applications. Color appearance differences are negligible in typical circuit board indicator contexts.

Frequently Asked Questions (FAQ)

Q: Can the H190C-3 be used as a direct drop-in replacement for the 5361M1/5?

A: Electrical and functional compatibility is confirmed. Physical compatibility requires PCB footprint assessment due to lens size difference (3mm vs. 5mm). Mounting hole spacing and clearance must be verified against the specific PCB design. Current-limiting resistor values may require adjustment due to the higher millicandela rating of the H190C-3.

Q: What are the key differences between these two parts?

A: The primary differences are lens size (3mm vs. 5mm), millicandela rating (5mcd vs. 35mcd), product status (obsolete vs. active), and wavelength characteristics. Electrical current, voltage ratings, mounting type, and compliance certifications are equivalent.

Q: Does the higher millicandela rating of the H190C-3 affect circuit design?

A: Yes. The H190C-3 produces significantly higher luminous intensity (35mcd vs. 5mcd). Existing current-limiting resistor values designed for the 5361M1/5 may result in excessive brightness with the H190C-3. Circuit resistor values should be recalculated based on desired brightness levels and the H190C-3 specifications.

Q: Are there any packaging differences?

A: The 5361M1/5 is supplied in standard packaging, while the H190C-3 is supplied in trays. This affects handling and storage procedures but does not impact component performance or compatibility.

Q: What is the significance of the wavelength differences?

A: Green wavelength variance (562nm to 568nm) and red wavelength variance (650nm to 635nm) are within acceptable ranges for indicator applications. Visual color perception differences are negligible in typical circuit board indicator use cases.

Q: Why is product status important for this substitution?

A: The 5361M1/5 is obsolete, meaning VCC no longer manufactures this component. The H190C-3 is actively produced by Bivar Inc., ensuring availability for current and future procurement needs. This is critical for design continuity and supply chain reliability.

Q: Are both components RoHS compliant?

A: Yes. Both the 5361M1/5 and H190C-3 meet ROHS3 compliance requirements, ensuring compatibility with environmental and regulatory standards without additional modifications.