TE Connectivity 535676-4 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 535676-4 is a 5 Position Receptacle Connector with 0.100" (2.54mm) pitch, designed for Through Hole, Right Angle board-to-board applications. This connector features gold-plated mating contacts and tin-lead post finish, operating across -55°C to 125°C. The part is classified as Obsolete, necessitating identification of equivalent and substitute components for ongoing design requirements and procurement needs.

Substiute Parts

535676-4

TE Connectivity AMP ConnectorsIn Stock: 803535676-4 Datasheet

Current PartRFQ

5535676-4

TE Connectivity AMP ConnectorsIn Stock: 8295535676-4 Datasheet

DirectRFQ

0901481310

MolexIn Stock: 16440901481310 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 535676-4 is determined by the following critical parameters: Connector Type (Receptacle), Contact Type (Female Socket), Pitch (0.100"), Mounting Type (Through Hole, Right Angle), Contact Finish - Mating (Gold), Termination (Solder), and Fastening Type (Push-Pull).

Direct Equivalent: The TE Connectivity 5535676-4 maintains identical electrical and mechanical specifications to the main part, with the primary distinction being Active product status and RoHS Compliance, making it the preferred direct replacement.

Similar Substitute: The Molex 0901481310 shares the same pitch, mounting type, contact finish, termination method, and fastening type. However, this part differs in position count (10 vs. 5), operating temperature maximum (105°C vs. 125°C), and insulation height, requiring application-level compatibility verification before selection.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5535676-4 (Direct Equivalent): This part is the recommended replacement for the obsolete TE Connectivity 535676-4. It maintains identical mechanical and electrical specifications, including the same 5-position configuration, 0.100" pitch, and operating temperature range. The primary advantage is Active product status with RoHS Compliance certification, ensuring long-term availability and regulatory alignment. The contact post finish differs (Tin vs. Tin-Lead), with increased thickness (150.0µin vs. 50.0µin), providing enhanced durability. This part is suitable for direct substitution in all applications previously using the 535676-4.

Molex 0901481310 (Similar Substitute): This part shares fundamental connector characteristics including pitch, mounting type, contact finish, and termination method. Selection of this part requires application-level compatibility assessment due to the following differences: 10-position configuration (vs. 5-position), reduced maximum operating temperature (105°C vs. 125°C), and slightly reduced insulation height (0.130" vs. 0.137"). This part is suitable only for applications where the 10-position capacity and lower temperature rating are acceptable. The part carries ROHS3 Compliance and REACH Unaffected certifications.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5535676-4 be used as a direct replacement for the 535676-4?

A: Yes. The 5535676-4 maintains identical electrical and mechanical specifications, including 5-position configuration, 0.100" pitch, Through Hole Right Angle mounting, gold mating contact finish, and -55°C to 125°C operating range. The primary differences are product status (Active vs. Obsolete) and RoHS compliance status.

Q: What are the key differences between the 535676-4 and the Molex 0901481310?

A: The primary differences are: position count (5 vs. 10), maximum operating temperature (125°C vs. 105°C), and insulation height (0.137" vs. 0.130"). Both share 0.100" pitch, Through Hole Right Angle mounting, gold mating contact finish, and solder termination with push-pull fastening.

Q: Is the Molex 0901481310 a suitable substitute for the 535676-4?

A: The Molex 0901481310 is a similar substitute only for applications where the 10-position capacity and 105°C maximum operating temperature are compatible with design requirements. Direct substitution is not recommended without application-level compatibility verification.

Q: What is the packaging difference between the 535676-4 and 5535676-4?

A: The 535676-4 packaging is not specified in available data. The 5535676-4 is supplied in Tube packaging.

Q: Are there RoHS compliance considerations for these parts?

A: The 535676-4 is RoHS non-compliant. The 5535676-4 is RoHS Compliant. The Molex 0901481310 is ROHS3 Compliant. For applications requiring RoHS compliance, the 5535676-4 or 0901481310 are appropriate selections.

Q: What is the contact post finish difference between the 535676-4 and 5535676-4?

A: The 535676-4 features Tin-Lead post finish with 50.0µin (1.27µm) thickness. The 5535676-4 features Tin post finish with 150.0µin (3.81µm) thickness, providing increased contact durability.

Q: Can these connectors be used interchangeably in the same PCB layout?

A: The 535676-4 and 5535676-4 share identical mechanical dimensions and can be used interchangeably in the same PCB layout. The Molex 0901481310 has slightly different insulation height (0.130" vs. 0.137") and contact length specifications, requiring PCB layout verification before substitution.