TE Connectivity 5352069-4 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5352069-4 is a 125-position receptacle connector with female sockets, featuring 2.00mm pitch and press-fit termination. This backplane connector is designed for through-hole, right-angle mounting applications and operates across an extended temperature range of -55°C to 125°C. The connector maintains an active product status with RoHS compliance and unlimited moisture sensitivity rating (MSL 1).

Equivalent and substitute parts are identified to provide design flexibility, accommodate supply chain variations, support alternative packaging requirements, and enable selection based on specific electrical performance needs or mounting configuration preferences.

Substiute Parts

5352069-4

TE Connectivity AMP ConnectorsIn Stock: 11375352069-4 Datasheet

Current PartRFQ

17221251101

HARTINGIn Stock: 105617221251101 Datasheet

SimilarRFQ

HM2R02PA5100AALF

Amphenol ICC (FCI)In Stock: 672HM2R02PA5100AALF Datasheet

SimilarRFQ

HM2R02PA5100N9LF

Amphenol ICC (FCI)In Stock: 2113HM2R02PA5100N9LF Datasheet

SimilarRFQ

HM2R02PA5108N9LF

Amphenol ICC (FCI)In Stock: 10337HM2R02PA5108N9LF Datasheet

SimilarRFQ

HM2R65PA5100N9LF

Amphenol ICC (FCI)In Stock: 1969HM2R65PA5100N9LF Datasheet

SimilarRFQ

HM2R65PA5108N9LF

Amphenol ICC (FCI)In Stock: 1365HM2R65PA5108N9LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following core parameters:

Primary Substitution Criteria:

• Connector type: Receptacle, Female Sockets
• Number of positions: 125
• Pitch: 0.079" (2.00mm)
• Number of rows: 5
• Termination method: Press-Fit
• Contact finish: Gold
• Operating temperature range: -55°C ~ 125°C
• Mounting configuration: Through Hole, Right Angle

Substitution Constraints: Parts are grouped as direct equivalents only when all primary criteria are met. Variations in current rating, voltage rating, connector style designation, mounting detail (board edge vs. standard through-hole), contact finish thickness, and REACH status are noted but do not disqualify substitution eligibility. Parts with different position counts, row configurations, or termination methods are excluded from direct substitution.

The substitute parts listed below meet the core electrical and mechanical requirements for interchangeability in applications designed for the TE Connectivity 5352069-4.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalents (Full Substitution):

The following parts satisfy all primary substitution criteria and are suitable for direct replacement in applications designed for the TE Connectivity 5352069-4:

• HM2R02PA5100N9LF (Amphenol ICC, Millipacs®): Maintains 125-position, 2.00mm pitch, 5-row configuration with press-fit termination. Offers enhanced voltage rating (750Vrms vs. 500Vrms) and equivalent current capacity (1.5A). RoHS compliant with highest inventory availability (2024 units).

• HM2R02PA5108N9LF (Amphenol ICC, Millipacs®): Identical electrical and mechanical specifications to HM2R02PA5100N9LF with upper shield feature matching the main part. Largest inventory stock (10300 units). RoHS compliant.

• HM2R02PA5100AALF (Amphenol ICC, Millipacs®): Meets core substitution criteria with 125 positions, 2.00mm pitch, and 1.5A current rating. Voltage rating elevated to 750Vrms. RoHS compliant.

Conditional Equivalents (Application-Dependent):

• 17221251101 (HARTING, har-bus® HM): Maintains 125-position, 2.00mm pitch, 5-row through-hole right-angle configuration. Current rating reduced to 1.0A (vs. 1.5A main part). Voltage rating not specified. ROHS3 compliant. Suitable for applications with current requirements not exceeding 1.0A.

Non-Equivalent (Excluded from Substitution):

• HM2R65PA5108N9LF: Position count increased to 150 (125 + 25 ground) with 6 rows (5 + 1). Connector style AB 25 differs from main part B 25 designation. Excluded due to dimensional and electrical architecture differences.

Compliance and Regulatory Status:

All substitute parts maintain RoHS compliance and MSL 1 (unlimited) moisture sensitivity rating. The Amphenol ICC Millipacs® series parts carry REACH Affected status, whereas the main part and HARTING part are REACH Unaffected. Selection should account for supply chain compliance requirements specific to end-use application geography and customer specifications.

Frequently Asked Questions (FAQ)

Q: Can HM2R02PA5108N9LF be used as a direct replacement for TE Connectivity 5352069-4?

A: Yes. Both connectors share identical core specifications: 125 positions, 2.00mm pitch, 5 rows, press-fit termination, through-hole right-angle mounting, and -55°C to 125°C operating range. The HM2R02PA5108N9LF provides equivalent or superior electrical performance (1.5A current, 750Vrms voltage) and includes upper shield protection matching the main part.

Q: What is the difference between HM2R02PA5100N9LF and HM2R02PA5108N9LF?

A: Both parts are electrically and mechanically identical with respect to position count, pitch, rows, and current/voltage ratings. The primary difference is the presence of upper shield protection on the HM2R02PA5108N9LF. Selection depends on electromagnetic shielding requirements in the application.

Q: Why is 17221251101 listed as a conditional equivalent?

A: The HARTING 17221251101 meets all core mechanical and thermal specifications but carries a reduced current rating of 1.0A compared to the main part's 1.5A. It is suitable only for applications where circuit current does not exceed 1.0A. Voltage rating is not specified in available documentation.

Q: Can HM2R65PA5108N9LF replace the TE Connectivity 5352069-4?

A: No. The HM2R65PA5108N9LF is not a direct substitute. Although it shares the 2.00mm pitch and operating temperature range, it features 150 positions (125 + 25 ground) across 6 rows (5 + 1), compared to the main part's 125 positions across 5 rows. The connector style designation also differs (AB 25 vs. B 25). These differences preclude direct substitution.

Q: What packaging options are available for substitute parts?

A: The main part TE Connectivity 5352069-4 packaging is not specified. Substitute parts are available in the following packaging formats: HARTING 17221251101 (Tube), Amphenol ICC Millipacs® series (Tray). Packaging selection should align with assembly process requirements and inventory management protocols.

Q: Are all substitute parts RoHS compliant?

A: Yes. All listed substitute parts maintain RoHS compliance. The main part is RoHS Compliant; HARTING 17221251101 is ROHS3 Compliant; Amphenol ICC Millipacs® series parts are RoHS Compliant. REACH status varies: main part and HARTING are REACH Unaffected; Amphenol ICC parts are REACH Affected.

Q: What is the significance of the upper shield feature on HM2R02PA5108N9LF?

A: The upper shield provides electromagnetic interference (EMI) shielding. The main part TE Connectivity 5352069-4 includes upper shield protection. The HM2R02PA5108N9LF also includes this feature, making it functionally equivalent in shielded applications. The HM2R02PA5100N9LF and HM2R02PA5100AALF do not specify upper shield features.

Q: How do voltage ratings affect substitution?

A: The main part is rated for 500Vrms. Substitute parts from Amphenol ICC Millipacs® series are rated for 750Vrms, providing higher voltage margin. The HARTING 17221251101 voltage rating is not specified. Higher voltage ratings do not disqualify substitution but indicate enhanced performance capability. Application voltage requirements must not exceed the selected part's rating.

Q: What inventory considerations apply to part selection?

A: Current inventory levels are: TE Connectivity 5352069-4 (1119 units), HM2R02PA5108N9LF (10300 units), HM2R02PA5100N9LF (2024 units), HM2R65PA5100N9LF (1891 units), HM2R02PA5100AALF (611 units), HARTING 17221251101 (1011 units). Inventory availability should be evaluated against production volume and lead-time requirements.