TE Connectivity 534267-7 Rectangular Connector: Equivalent & Substitute Parts

Part Overview

The TE Connectivity 534267-7 is a 40-position receptacle connector from the AMPMODU Mod IV series, designed for board-to-board applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features female socket contacts with gold mating finish and tin-lead post finish, suitable for solder termination with push-pull fastening. The part is currently active in production with 812 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when specific compliance requirements necessitate alternative configurations.

Substiute Parts

534267-7

TE Connectivity AMP ConnectorsIn Stock: 916534267-7 Datasheet

Current PartRFQ

5-534267-7

TE Connectivity AMP ConnectorsIn Stock: 11355-534267-7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between the main part 534267-7 and the alternative part 5-534267-7 is determined by equivalence in the following critical parameters:

Mechanical Compatibility Parameters:

• Connector type (Receptacle, Bottom or Top Entry)
• Number of positions (40)
• Pitch spacing (0.100" / 2.54mm)
• Row configuration (2 rows at 0.100" spacing)
• Mounting method (Through Hole)
• Contact type (Female Socket)
• Fastening mechanism (Push-Pull)

Electrical Interface Parameters:

• Contact finish at mating surface (Gold)
• Contact material (Phosphor Bronze)
• Insulation material (Polyester, Glass Filled)

Physical Dimensions:

• Insulation height (0.265" / 6.73mm)
• Contact length - post (0.125" / 3.18mm)
• Contact finish thickness - mating (30.0µin / 0.76µm)
• Contact finish thickness - post (150.0µin / 3.81µm)

Both parts share identical base product number 534267 and belong to the AMPMODU Mod IV series, confirming functional interchangeability for board-to-board connector applications.

Parameter Comparison

Engineering Selection Recommendations

Both 534267-7 and 5-534267-7 are functionally equivalent rectangular connectors suitable for identical board-to-board applications. The primary differences between these parts relate to compliance certifications and post-contact finish specifications.

534267-7 Characteristics:

• RoHS status listed as "Not applicable"
• Post contact finish: Tin-Lead
• REACH status: REACH Affected
• Inventory: 812 units

5-534267-7 Characteristics:

• RoHS Compliant
• Post contact finish: Tin (lead-free)
• REACH status: Vendor Undefined
• Inventory: 1041 units

Selection between these parts should be based on regulatory requirements applicable to the end application. Applications requiring RoHS compliance or lead-free post finishes should specify 5-534267-7. Applications without such restrictions may use either part. Both parts maintain identical mechanical and electrical interface specifications, ensuring direct substitution capability in connector mating and board-level integration.

Frequently Asked Questions (FAQ)

Q: Are 534267-7 and 5-534267-7 mechanically interchangeable?

A: Yes. Both connectors share identical mechanical specifications including 40-position configuration, 0.100" (2.54mm) pitch, 2-row layout, through-hole mounting, and push-pull fastening. They are directly interchangeable at the board level.

Q: What is the difference between the post contact finishes?

A: The 534267-7 features tin-lead post finish, while the 5-534267-7 features tin post finish (lead-free). Both maintain identical contact finish thickness of 150.0µin (3.81µm). The lead-free variant (5-534267-7) is suitable for applications requiring RoHS compliance.

Q: Can I use 5-534267-7 as a direct replacement for 534267-7?

A: Yes, for applications without RoHS restrictions. The 5-534267-7 is RoHS Compliant with lead-free post finish, making it suitable for all applications where 534267-7 is specified, provided regulatory requirements do not mandate the tin-lead finish.

Q: What is the mating surface finish for both parts?

A: Both connectors feature gold mating surface finish with identical thickness of 30.0µin (0.76µm), ensuring equivalent electrical contact characteristics and corrosion resistance.

Q: Are there any differences in insulation material or dimensions?

A: No. Both parts use polyester glass-filled insulation with identical insulation height of 0.265" (6.73mm) and contact length of 0.125" (3.18mm). All physical dimensions are identical.

Q: Which part should I select for new designs?

A: Selection depends on regulatory compliance requirements. For applications requiring RoHS compliance or lead-free components, specify 5-534267-7. Both parts are active products with adequate inventory availability.

Q: Are both parts suitable for solder termination?

A: Yes. Both connectors are designed for solder termination through their through-hole mounting configuration. The post contact finish differences do not affect solderability.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.