TE Connectivity 534204-3 Rectangular Connector: Equivalent & Substitute Parts

Part Overview

The TE Connectivity 534204-3 is a 36-position receptacle connector from the AMPMODU Mod II series, designed for board-to-board applications. This connector features a 0.100" (2.54mm) pitch, right-angle through-hole mounting, and gold-plated mating contacts. The part is currently active in production with 1037 pieces available in new original stock.

Substitute parts are identified when equivalent electrical and mechanical specifications are maintained across all critical parameters. Substitution becomes necessary when the primary part number reaches end-of-life status, inventory constraints occur, or when alternative compliance certifications are required for specific applications.

Substiute Parts

534204-3

TE Connectivity AMP ConnectorsIn Stock: 1129534204-3 Datasheet

Current PartRFQ

5-534204-3

TE Connectivity AMP ConnectorsIn Stock: 12015-534204-3 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for rectangular connectors in the 36-position, 0.100" pitch category is determined by strict equivalence across the following critical parameters:

Mechanical Compatibility Parameters:

• Number of positions (36)
• Pitch spacing (0.100" / 2.54mm)
• Number of rows (2)
• Row spacing (0.100" / 2.54mm)
• Mounting type (Through Hole, Right Angle)
• Insulation height (0.238" / 6.05mm)
• Contact length - post (0.115" / 2.92mm)

Electrical Compatibility Parameters:

• Contact type (Female Socket)
• Connector type (Receptacle)
• Contact material (Phosphor Bronze)
• Contact finish - mating (Gold at 30.0µin / 0.76µm)
• Contact finish - post (50.0µin / 1.27µm)
• Termination method (Kinked Pin, Solder)

Environmental & Compliance Parameters:

• Series designation (AMPMODU Mod II)
• Fastening type (Push-Pull)
• Features (Guide Pin Ears)
• Moisture Sensitivity Level (MSL 1)

The substitute part 5-534204-3 maintains full equivalence across all mechanical and electrical parameters. The only variance is in post contact finish material (Tin versus Tin-Lead) and RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

534204-3 Selection Criteria: The 534204-3 is appropriate for applications where RoHS non-compliant components are acceptable and tin-lead post plating is specified. This part maintains active production status and has established supply availability.

5-534204-3 Selection Criteria: The 5-534204-3 is the direct substitute when RoHS compliance is required. This part is RoHS compliant and features tin post plating instead of tin-lead. Both parts are active products from TE Connectivity with equivalent mechanical and electrical performance. The 5-534204-3 offers higher current inventory levels (1133 pieces versus 1037 pieces).

Compliance Considerations: Selection between these parts is primarily driven by regulatory requirements. Applications subject to RoHS directives, WEEE regulations, or customer-mandated environmental compliance specifications require the 5-534204-3. Applications with no RoHS requirement may use either part based on availability and cost considerations.

Post Finish Consideration: The post contact finish differs between parts (Tin-Lead versus Tin). Both finishes maintain the specified 50.0µin (1.27µm) thickness. This variance does not affect mechanical interchangeability or mating performance with standard 0.100" pitch connectors.

Frequently Asked Questions (FAQ)

Q: Are 534204-3 and 5-534204-3 mechanically interchangeable?

A: Yes. Both connectors maintain identical mechanical specifications including 36 positions, 0.100" pitch, right-angle through-hole mounting, and all dimensional parameters. They are direct mechanical substitutes.

Q: What is the difference between these two part numbers?

A: The primary differences are RoHS compliance status and post contact finish material. The 534204-3 is RoHS non-compliant with tin-lead post plating. The 5-534204-3 is RoHS compliant with tin post plating. All mating contact specifications and electrical performance parameters are identical.

Q: Can I use 5-534204-3 as a replacement for 534204-3 in existing designs?

A: Yes, for applications where RoHS compliance is acceptable or required. The 5-534204-3 is a direct functional equivalent. Verify that your application or customer requirements do not specifically mandate tin-lead post plating before substitution.

Q: Are there any soldering or assembly differences between these connectors?

A: No. Both parts use identical kinked pin solder termination methods and are designed for standard through-hole PCB assembly processes. Assembly procedures and solder specifications remain unchanged.

Q: Which part should I specify for new designs?

A: For new designs, specify 5-534204-3 unless RoHS non-compliance is explicitly required. This part offers RoHS compliance, higher inventory availability, and maintains full compatibility with the AMPMODU Mod II series ecosystem.

Q: What is the significance of the "5-" prefix in 5-534204-3?

A: The "5-" prefix indicates a variant designation within TE Connectivity's part numbering system. In this case, it identifies the RoHS-compliant version with tin post plating of the base 534204 connector platform.

Q: Are both parts suitable for board-to-board applications?

A: Yes. Both connectors are classified as board-to-board style receptacles with right-angle mounting, making them suitable for PCB-to-PCB interconnection applications requiring 36-position, 0.100" pitch connectivity.

Q: What is the current rating and voltage rating for these connectors?

A: Current and voltage ratings are not specified in the provided technical documentation for these connector models. Consult the manufacturer's detailed datasheet for electrical performance specifications.