TE Connectivity AMP Connectors 533060-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 533060-9 is a 100-position backplane connector header designed for high-density interconnect applications. This male pin through-hole connector operates across an extended temperature range of -65°C to 125°C and features gold-plated contacts with press-fit termination. The part is actively manufactured and maintains RoHS compliance with unlimited moisture sensitivity rating. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when specific application requirements necessitate alternative connector configurations.

Substiute Parts

533060-9

TE Connectivity AMP ConnectorsIn Stock: 1136533060-9 Datasheet

Current PartRFQ

PCN10-100P-2.54DSA(72)

Hirose Electric Co LtdIn Stock: 1216PCN10-100P-2.54DSA(72) Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 533060-9 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 100
• Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Connector Type: Header, Male Pins
• Mounting Type: Through Hole
• Contact Finish: Gold
• Material Flammability Rating: UL94 V-0
• Moisture Sensitivity Level: 1 (Unlimited)

Acceptable Variation Parameters:

• Termination method (Press-Fit vs. Solder)
• Contact finish thickness
• Operating temperature range (substitute must support minimum -55°C to 85°C)
• Packaging format (Tube vs. Tray)
• Manufacturer source

The substitute part PCN10-100P-2.54DSA(72) from Hirose Electric Co Ltd satisfies all mandatory matching parameters while introducing acceptable variations in termination technology and thermal operating range.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (TE Connectivity 533060-9): Select the TE Connectivity 533060-9 when applications require extended temperature operation from -65°C to 125°C. This part is actively manufactured with established supply chain availability and RoHS compliance certification. Press-fit termination provides mechanical reliability for high-density interconnect applications.

Substitute Part Selection (Hirose PCN10-100P-2.54DSA(72)): The Hirose PCN10-100P-2.54DSA(72) serves as a functional equivalent for applications operating within the -55°C to 85°C temperature window. This substitute maintains identical positional and pitch specifications with gold contact finish and UL94 V-0 flammability rating. The solder termination method requires board-level design accommodation. ROHS3 compliance and unlimited moisture sensitivity rating align with regulatory requirements. Current rating specification of 2A provides defined electrical performance parameters.

Compliance Considerations: Both parts maintain RoHS compliance and unlimited moisture sensitivity classification. The TE Connectivity part carries RoHS Compliant status while the Hirose substitute carries ROHS3 Compliant status. Both parts are classified under ECCN EAR99 and HTSUS 8536.69.4040 for export and tariff purposes.

Frequently Asked Questions (FAQ)

Q: Can the Hirose PCN10-100P-2.54DSA(72) replace the TE Connectivity 533060-9 in all applications?

A: The Hirose substitute is functionally equivalent for applications operating within -55°C to 85°C. Applications requiring operation below -55°C or above 85°C must use the TE Connectivity part with its extended -65°C to 125°C range. Termination method differences (solder vs. press-fit) require design verification at the board assembly level.

Q: What is the primary difference between these two parts?

A: The primary differences are termination technology (press-fit vs. solder), operating temperature range, and contact finish thickness. Both parts maintain identical connector geometry, position count, pitch, and row configuration.

Q: Are packaging differences significant for component selection?

A: Packaging format (Tube vs. Tray) affects handling, storage, and assembly line integration but does not impact electrical or mechanical connector performance. Selection depends on manufacturing process requirements and inventory management practices.

Q: Does the lower contact finish thickness of the Hirose part affect reliability?

A: Contact finish thickness is specified for both parts within their respective design parameters. The Hirose part specifies 8.00µin (0.203µm) while the TE Connectivity part specifies 30.0µin (0.76µm). Both finishes are engineered for their respective connector designs and operating conditions.

Q: What does the current rating specification on the Hirose part indicate?

A: The Hirose part specifies a 2A current rating per contact. The TE Connectivity part does not provide a current rating specification in the available documentation. Applications requiring defined current capacity should reference the Hirose specification or contact TE Connectivity for current rating data on the primary part.

Q: Are both parts suitable for high-density interconnect applications?

A: Yes. The TE Connectivity part is designated as HDI (High Density Interconnect) series. The Hirose part maintains identical 100-position, 2-row configuration at 0.100" pitch, supporting high-density interconnect requirements. Both parts are classified as backplane connectors suitable for dense PCB applications.

Q: What compliance certifications apply to both parts?

A: Both parts carry UL94 V-0 material flammability rating, unlimited moisture sensitivity level (MSL 1), and RoHS compliance. The TE Connectivity part is RoHS Compliant; the Hirose part is ROHS3 Compliant. Both are REACH Affected or REACH Unaffected respectively and classified under ECCN EAR99 for export purposes.