LED CBI 2MM YELLOW RA PCB 5300H7 Equivalent & Substitute Parts

Part Overview

The VCC 5300H7 is a circuit board indicator LED featuring a 2.00mm diameter yellow tinted lens with right-angle through-hole mounting. This component is classified as obsolete, necessitating identification of equivalent substitute parts for ongoing design requirements and production continuity. The 5300H7 delivers 6.3 millicandela at 10mA forward current with a 2.1V voltage rating and is suitable for applications requiring compact indicator functionality on printed circuit boards.

Substiute Parts

5300H7

Visual Communications Company - VCCIn Stock: 8895300H7 Datasheet

Current PartRFQ

SSF-LXH100YD-01

Lumex Opto/Components Inc.In Stock: 4273SSF-LXH100YD-01 Datasheet

DirectRFQ

WP1533BQ/YD

KingbrightIn Stock: 817WP1533BQ/YD Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5300H7 are identified based on the following critical parameters that determine functional and mechanical compatibility:

Matching Parameters (Required for Substitution):

• Color: Yellow
• Wavelength - Peak: 585nm or adjacent yellow spectrum (590nm acceptable)
• Configuration: Single
• Voltage Rating: 2.1V
• Mounting Type: Through Hole, Right Angle
• Lens Style: Round with Domed Top
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameters (Allowable Differences):

• Forward Current: 10mA to 20mA
• Millicandela Rating: 6.3mcd to 40mcd
• Lens Size: 2.00mm to 5mm diameter
• Lens Type: Tinted to Diffused, Tinted

The substitute parts listed below maintain electrical compatibility through matching voltage and configuration specifications while accommodating variations in physical dimensions and optical output characteristics suitable for circuit board indicator applications.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitute - SSF-LXH100YD-01 (Lumex Opto/Components Inc.)

The SSF-LXH100YD-01 is an active production part that maintains electrical compatibility with the 5300H7 through identical voltage rating (2.1V) and configuration (Single, Yellow). This part is ROHS3 compliant and REACH unaffected, meeting the same regulatory requirements as the original component. The increased forward current specification (20mA versus 10mA) and higher millicandela rating (30mcd versus 6.3mcd) provide enhanced optical output. The larger 5mm lens diameter accommodates increased brightness in a physically larger package suitable for applications where space constraints have been relaxed.

Alternative Substitute - WP1533BQ/YD (Kingbright)

The WP1533BQ/YD is an active production part offering similar electrical characteristics (2.1V, 20mA, Single Yellow configuration) with ROHS3 compliance and REACH unaffected status. The 4.70mm lens diameter provides a mid-range physical size between the original 2.00mm and the 5mm Lumex option. The 590nm peak wavelength remains within the yellow spectrum range. The 40mcd millicandela rating delivers the highest optical output among available substitutes.

Both substitute parts are suitable for applications requiring circuit board indicator functionality with enhanced brightness and are available in active production status, ensuring supply continuity.

Frequently Asked Questions (FAQ)

Q: Can the SSF-LXH100YD-01 or WP1533BQ/YD be used as direct replacements for the 5300H7 in existing PCB designs?

A: Electrical substitution is valid due to matching voltage rating (2.1V) and configuration (Single, Yellow). However, physical board layout modifications are required due to lens diameter differences. The 5300H7 features a 2.00mm lens, while the SSF-LXH100YD-01 has a 5mm lens and the WP1533BQ/YD has a 4.70mm lens. PCB mounting hole spacing and component clearances must be verified before implementation.

Q: What is the significance of the wavelength specifications (585nm versus 590nm)?

A: Both wavelengths fall within the yellow spectrum range and are visually indistinguishable in circuit board indicator applications. The 585nm specification of the 5300H7 and SSF-LXH100YD-01 represents peak wavelength at the center of the yellow band, while the 590nm specification of the WP1533BQ/YD represents a slight shift toward the orange-yellow boundary. Both are acceptable for yellow indicator applications.

Q: How do the current and brightness differences affect circuit design?

A: The 5300H7 operates at 10mA, while both substitute parts operate at 20mA. Series resistor values in the current-limiting circuit must be recalculated to accommodate the higher current specification. The increased millicandela ratings (30mcd and 40mcd versus 6.3mcd) result in higher optical output, which may require adjustment of circuit board layout to prevent excessive brightness in the application environment.

Q: Are all three parts compliant with the same regulatory standards?

A: Yes. The 5300H7, SSF-LXH100YD-01, and WP1533BQ/YD are all ROHS3 compliant and REACH unaffected. All three parts have Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture handling requirements during storage or assembly.

Q: What packaging considerations apply to these parts?

A: The 5300H7 is specified with through-hole, right-angle mounting. The SSF-LXH100YD-01 is supplied in bulk packaging, while the WP1533BQ/YD packaging specification is not detailed in the available data. Both substitute parts maintain through-hole, right-angle mounting compatibility with the original component.