LED Circuit Board Indicator 5300H5 Equivalent & Substitute Parts

Part Overview

The VCC 5300H5 is a green circuit board indicator LED designed for through-hole, right-angle mounting applications. This component features a 2.00mm diameter tinted lens with domed top, operating at 2.2V with 10mA current consumption and 10mcd brightness output. The 5300H5 is classified as obsolete, necessitating identification of functionally equivalent active alternatives that maintain compatibility with existing circuit board designs while meeting current component availability and compliance requirements.

Substiute Parts

5300H5

Visual Communications Company - VCCIn Stock: 13415300H5 Datasheet

Current PartRFQ

SSF-LXH100GD-01

Lumex Opto/Components Inc.In Stock: 63283SSF-LXH100GD-01 Datasheet

DirectRFQ

WP1533BQ/GD

KingbrightIn Stock: 4994WP1533BQ/GD Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5300H5 are identified based on the following critical parameters that determine functional compatibility:

Core Compatibility Criteria:

• Color: Green
• Voltage Rating: 2.2V
• Mounting Type: Through Hole, Right Angle
• Configuration: Single LED
• RoHS3 Compliance
• REACH Unaffected Status

Parameters Permitting Variation:

• Lens Size: The 5300H5 uses a 2.00mm diameter lens. Substitute parts with larger lens diameters (4.70mm and 5mm) are acceptable where circuit board layout permits, as they maintain the same mounting interface and electrical characteristics.
• Current Rating: Substitute parts rated at 20mA and 25mA represent higher current capacity than the original 10mA specification. These parts operate at the same 2.2V voltage and maintain backward compatibility in applications where the circuit design supports increased current draw.
• Millicandela Rating: Brightness values of 30mcd and 50mcd exceed the original 10mcd specification, providing enhanced visibility while maintaining electrical compatibility.
• Lens Type: Diffused lens variants provide alternative optical characteristics while maintaining the same mounting and electrical specifications.

Parameter Comparison

Engineering Selection Recommendations

SSF-LXH100GD-01 (Lumex Opto/Components Inc.)

The Lumex SSF-LXH100GD-01 is an active product suitable for direct substitution in applications where a 5mm lens diameter is accommodated by circuit board layout. This part maintains the 2.2V voltage specification and right-angle through-hole mounting configuration of the original 5300H5. The 20mA current rating and 30mcd brightness output represent increased performance parameters. ROHS3 compliance and unlimited moisture sensitivity rating align with the original component specifications. The 565nm peak wavelength is within acceptable green LED spectrum variation.

WP1533BQ/GD (Kingbright)

The Kingbright WP1533BQ/GD is an active product offering a 4.70mm lens diameter, providing a geometric compromise between the original 2.00mm and the 5mm Lumex alternative. This part maintains 2.2V voltage operation and right-angle through-hole mounting. The 25mA current rating and 50mcd brightness output exceed original specifications. ROHS3 compliance and unlimited moisture sensitivity rating match the original component. The 565nm peak wavelength aligns with standard green LED specifications.

Both substitute parts are active products with current manufacturing status, ensuring long-term component availability compared to the obsolete 5300H5. Selection between these alternatives depends on circuit board layout constraints and optical performance requirements.

Frequently Asked Questions (FAQ)

Q: Can the SSF-LXH100GD-01 or WP1533BQ/GD be used as direct replacements for the 5300H5 without circuit modifications?

A: Both substitute parts operate at the identical 2.2V voltage rating and use the same through-hole, right-angle mounting configuration as the 5300H5. However, the larger lens diameters (5mm and 4.70mm respectively, compared to 2.00mm original) require verification that circuit board layout accommodates the increased physical size. The higher current ratings (20mA and 25mA versus 10mA original) require confirmation that the circuit design supports increased current draw.

Q: What is the difference between the Lumex and Kingbright substitute options?

A: The primary differences are lens size and current rating. The Lumex SSF-LXH100GD-01 features a 5mm lens diameter with 20mA current rating and 30mcd brightness. The Kingbright WP1533BQ/GD features a 4.70mm lens diameter with 25mA current rating and 50mcd brightness. Both maintain the 2.2V voltage specification and right-angle mounting of the original part. Selection depends on available circuit board space and desired brightness output.

Q: Are the substitute parts RoHS and REACH compliant?

A: Both the Lumex SSF-LXH100GD-01 and Kingbright WP1533BQ/GD are ROHS3 compliant and REACH unaffected, matching the compliance status of the original 5300H5.

Q: What is the viewing angle specification for the substitute parts?

A: Both substitute parts specify a 60-degree viewing angle. The original 5300H5 does not include a viewing angle specification in the provided data.

Q: How do the brightness levels compare between the original and substitute parts?

A: The original 5300H5 provides 10mcd brightness. The Lumex SSF-LXH100GD-01 provides 30mcd, and the Kingbright WP1533BQ/GD provides 50mcd. Both substitutes deliver increased brightness output while maintaining the same voltage and mounting specifications.

Q: What packaging formats are available for the substitute parts?

A: The Lumex SSF-LXH100GD-01 is supplied in bulk packaging. The Kingbright WP1533BQ/GD is supplied in tube packaging.