LED Circuit Board Indicator 5300H1/5 Equivalent & Substitute Parts

Part Overview

The VCC 5300H1/5 is a 2.00mm diameter LED circuit board indicator featuring dual color capability (green and red) with a diffused white lens and right-angle through-hole mounting. This component is classified as obsolete, making substitute part identification essential for ongoing design support and production continuity. The part operates at 2.2V with a 10mA current rating and delivers 6mcd luminous intensity, suitable for standard indicator applications requiring compact form factors.

Substiute Parts

5300H1/5

Visual Communications Company - VCCIn Stock: 11095300H1/5 Datasheet

Current PartRFQ

XVM1LUGR59M

SunLEDIn Stock: 864XVM1LUGR59M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the VCC 5300H1/5 is determined by the following critical parameters:

Functional Compatibility Criteria:

• Dual color configuration (green and red) capability
• Diffused lens type with white diffusion
• Round domed top lens style
• Through-hole right-angle mounting orientation
• Compliance with ROHS3 and REACH requirements

Electrical Compatibility Criteria:

• Operating voltage range: 2.0V to 2.2V
• Peak wavelengths: 565nm (green), 627nm to 650nm (red)
• Single LED configuration

Physical Compatibility Criteria:

• Lens diameter: 2.00mm to 5mm acceptable for board layout integration
• Through-hole mounting with right-angle orientation

The SunLED XVM1LUGR59M qualifies as a substitute based on matching color configuration, lens type, mounting style, and regulatory compliance. Differences in current rating, millicandela output, and lens size represent design trade-offs that must be evaluated within specific circuit requirements.

Parameter Comparison

Engineering Selection Recommendations

Substitution Feasibility:

The SunLED XVM1LUGR59M is an active product substitute for the obsolete VCC 5300H1/5. Both components maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory continuity in applications requiring these certifications.

Design Considerations:

The primary differences between the main part and substitute are physical size (2.00mm versus 5mm lens diameter) and electrical characteristics (10mA versus 140mA/160mA current ratings). The substitute delivers significantly higher luminous intensity (59mcd green, 39mcd red versus 6mcd), which may require circuit redesign to accommodate higher current draw and brightness output.

The substitute's 60-degree viewing angle specification provides defined light distribution characteristics absent from the main part specification. The red wavelength difference (627nm substitute versus 650nm main part) represents a minor spectral shift within standard red LED ranges.

Compliance Status:

Both components satisfy ROHS3 and REACH requirements, supporting applications in regulated markets. MSL rating of 1 (unlimited) for both parts indicates no moisture sensitivity constraints during storage or handling.

Frequently Asked Questions (FAQ)

Q: Can the SunLED XVM1LUGR59M directly replace the VCC 5300H1/5 without circuit modification?

A: Direct replacement requires circuit evaluation. The substitute operates at higher current levels (140mA/160mA versus 10mA) and delivers greater luminous intensity (59mcd/39mcd versus 6mcd). Existing current-limiting resistors and power supply capacity must be verified for compatibility with the higher current demand.

Q: What are the physical mounting differences between these parts?

A: Both components feature through-hole right-angle mounting. The primary difference is lens diameter: the main part uses 2.00mm diameter, while the substitute uses 5mm (T-1 3/4) diameter. PCB layout modifications may be necessary to accommodate the larger lens size.

Q: Are there wavelength compatibility concerns?

A: Green wavelengths are identical (565nm). Red wavelengths differ slightly (650nm main part versus 627nm substitute). This 23nm difference falls within standard red LED spectral ranges and is typically imperceptible in indicator applications.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the VCC 5300H1/5 and SunLED XVM1LUGR59M are ROHS3 compliant and REACH unaffected, supporting equivalent regulatory compliance in applications requiring these certifications.

Q: What is the viewing angle specification for the main part?

A: The VCC 5300H1/5 viewing angle is not specified in the provided data. The SunLED substitute specifies 60-degree viewing angle, which may differ from the original part's light distribution characteristics.

Q: How do the voltage ratings compare?

A: Green voltage ratings are identical (2.2V). Red voltage rating for the main part is 2.2V, while the substitute specifies 2.0V red. Circuit designs operating at 2.2V red must verify the substitute's 2.0V rating for compatibility.

Q: Is the substitute part currently available?

A: Yes. The SunLED XVM1LUGR59M is classified as active product status with 779 pieces in stock, ensuring supply continuity compared to the obsolete VCC 5300H1/5.