LED Circuit Board Indicator 5300E11 Equivalent & Substitute Parts

Part Overview

The VCC 5300E11 is a red LED circuit board indicator designed for through-hole, right-angle mounting applications. This component features a 2.00mm diameter round lens with domed top, rated for 2V operation at 10mA, with a peak wavelength of 650nm and 6.5 millicandela brightness rating. The 5300E11 is classified as obsolete, necessitating identification of active equivalent components for new designs and ongoing production requirements. Substitute parts must maintain functional compatibility while meeting current manufacturing and compliance standards.

Substiute Parts

5300E11

Visual Communications Company - VCCIn Stock: 11835300E11 Datasheet

Current PartRFQ

5505107F

DialightIn Stock: 23175505107F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 5300E11 is based on the following critical parameters that define functional equivalence:

Primary Compatibility Criteria:

• Color specification (Red, 650nm wavelength peak)
• Configuration (Single LED element)
• Mounting type (Through Hole, Right Angle)
• Voltage and current operating ranges
• RoHS3 compliance and MSL rating

The Dialight 5505107F qualifies as a substitute based on matching color, configuration, mounting type, and compliance certifications. This substitute operates at 2.1V and 20mA with a 5mm lens size and diffused lens type, representing a higher-brightness alternative within the same product category. The increased current rating and millicandela output (34mcd versus 6.5mcd) accommodate applications requiring enhanced visibility while maintaining the same mounting interface and environmental compliance profile.

Parameter Comparison

Engineering Selection Recommendations

The Dialight 5505107F serves as an active substitute for the obsolete VCC 5300E11 based on the following engineering criteria:

Compliance Alignment: Both components maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility in current manufacturing environments. The MSL rating of 1 (Unlimited) on both parts eliminates moisture sensitivity constraints during assembly and storage.

Functional Substitution: The substitute maintains the same color specification (650nm red wavelength), single-element configuration, and through-hole right-angle mounting interface. These parameters ensure direct PCB layout compatibility without redesign requirements.

Electrical Considerations: The substitute operates at 2.1V versus the original 2V specification, representing a 5% voltage increase. The current rating increases from 10mA to 20mA, with corresponding brightness increase from 6.5mcd to 34mcd. Circuit designs must accommodate these electrical parameter changes through appropriate current-limiting resistor adjustment.

Physical Differences: The substitute features a 5mm lens diameter compared to the original 2mm, with diffused lens type versus standard. These optical and dimensional changes affect PCB footprint and light distribution characteristics and require mechanical validation for the target application.

Frequently Asked Questions (FAQ)

Q: Can the Dialight 5505107F directly replace the VCC 5300E11 without circuit modification?

A: Direct replacement requires circuit redesign. The substitute operates at 2.1V (versus 2V) and 20mA (versus 10mA), necessitating current-limiting resistor recalculation. The 5mm lens size also differs from the original 2mm diameter, affecting PCB footprint and mounting clearances.

Q: What are the key compatibility parameters for this substitution?

A: Compatibility is established through matching color (red, 650nm), configuration (single element), mounting type (through-hole right angle), and compliance certifications (ROHS3, REACH unaffected, MSL 1). These parameters define functional equivalence for circuit board indicator applications.

Q: How does the diffused lens type on the substitute affect performance?

A: The diffused lens on the 5505107F provides a 50-degree viewing angle with distributed light output, compared to the standard lens on the 5300E11. This affects light distribution pattern and intensity concentration. Application requirements determine whether diffused characteristics are acceptable.

Q: Are there inventory considerations for this substitution?

A: The VCC 5300E11 is classified as obsolete with 1117 pieces in stock. The Dialight 5505107F is active production with 2302 pieces available. Long-term design transitions should prioritize the active substitute to ensure supply continuity.

Q: What electrical parameters must be recalculated for circuit integration?

A: The forward voltage increase from 2V to 2.1V and current increase from 10mA to 20mA require recalculation of series current-limiting resistors. The brightness increase from 6.5mcd to 34mcd may necessitate optical attenuation if the original design relied on specific intensity levels.

Q: Does the substitute maintain the same through-hole mounting footprint?

A: Both components feature through-hole right-angle mounting, but the 5mm lens diameter of the substitute differs from the 2mm diameter of the original. PCB hole spacing and mechanical clearances must be validated for the larger lens assembly.