TE Connectivity AMP Connectors 5225662-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5225662-2 is an N Type Connector Plug with male pin configuration, designed for 50 Ohm coaxial RF applications. This connector features crimp termination for both contact and shield, operates across a frequency range up to 11 GHz, and is rated for 1000 V with an operating temperature range of -65°C to 165°C. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility for continued system integration and maintenance.

Substiute Parts

5225662-2

TE Connectivity AMP ConnectorsIn Stock: 11045225662-2 Datasheet

Current PartRFQ

172102

Amphenol RFIn Stock: 1790172102 Datasheet

DirectRFQ

1-225092-1

TE Connectivity Aerospace, Defense and MarineIn Stock: 8401-225092-1 Datasheet

Parametric EquivalentRFQ

225092-1

TE Connectivity Aerospace, Defense and MarineIn Stock: 715225092-1 Datasheet

Parametric EquivalentRFQ

225092-2

TE Connectivity AMP ConnectorsIn Stock: 1005225092-2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 5225662-2 is determined by strict equivalence across the following critical parameters: N Type connector style, male pin plug configuration, 50 Ohm impedance, crimp termination for both contact and shield, free hanging in-line mounting, threaded fastening, 11 GHz maximum frequency operation, -65°C to 165°C operating temperature range, 500 mating cycles, brass body construction, and PTFE dielectric material. All substitute parts listed maintain these core electrical and mechanical specifications. Variations in cable group compatibility, body finish, voltage rating, and product status are documented but do not preclude functional substitution within the specified parameter envelope. The substitute parts are grouped as direct manufacturer equivalents (172102 from Amphenol RF) and parametric equivalents from TE Connectivity Aerospace, Defense and Marine (1-225092-1, 225092-1, 225092-2).

Parameter Comparison

Engineering Selection Recommendations

For applications requiring an active, currently available substitute for the obsolete 5225662-2, the Amphenol RF 172102 is the primary selection. This part maintains full electrical and mechanical equivalence across all critical parameters, operates at a higher voltage rating of 1500 V, and carries ROHS3 compliance certification. The 172102 supports an expanded cable group range (RG-8, 8A, 9, 9A, 9B, 87, 213, 214, 225, 302, 393) compared to the original part's RG-213 specification, providing greater application flexibility.

For applications where TE Connectivity sourcing is required, the 225092-1 from TE Connectivity Aerospace, Defense and Marine is an active equivalent that maintains all core electrical and mechanical specifications. This part is available in bulk packaging and carries ROHS3 compliance.

The 1-225092-1 and 225092-2 are parametric equivalents with discontinued status at DiGi Electronics and should be considered only when existing inventory is available and long-term supply continuity is not a requirement.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol RF 172102 directly replace the TE Connectivity 5225662-2 in existing designs?

A: Yes. The 172102 maintains electrical and mechanical equivalence across all critical parameters: N Type connector style, male pin plug configuration, 50 Ohm impedance, crimp termination, free hanging in-line mounting, threaded fastening, 11 GHz maximum frequency, -65°C to 165°C operating temperature, 500 mating cycles, brass body, and PTFE dielectric. The higher voltage rating of 1500 V provides additional design margin.

Q: What is the difference between the TE Connectivity 225092-1 and 225092-2?

A: Both parts are parametric equivalents with identical electrical and mechanical specifications. The primary difference is product status: 225092-1 is active, while 225092-2 is discontinued at DiGi Electronics. Both support the same core parameters and are suitable for substitution where inventory is available.

Q: Are there cable group compatibility differences between substitute parts?

A: Yes. The original 5225662-2 is specified for RG-213 cable. The Amphenol RF 172102 supports a broader cable group range including RG-8, 8A, 9, 9A, 9B, 87, 213, 214, 225, 302, and 393. The TE Connectivity 225092-1 is specified for RG-214, and 1-225092-1 is specified for RG-393. Cable group compatibility should be verified against system requirements.

Q: What is the significance of the voltage rating difference between the main part and the 172102?

A: The 5225662-2 is rated for 1000 V, while the Amphenol RF 172102 is rated for 1500 V. This represents a higher voltage capability in the substitute part and does not preclude substitution. Applications operating at or below 1000 V are fully compatible with the 172102.

Q: Which substitute part should be selected for new designs?

A: The Amphenol RF 172102 is recommended for new designs due to its active product status, ROHS3 compliance, higher voltage rating, expanded cable group compatibility, and documented insertion loss specification of 0.15 dB.

Q: What packaging options are available for substitute parts?

A: The Amphenol RF 172102 is supplied in bag packaging. The TE Connectivity parts (1-225092-1, 225092-1, 225092-2) are supplied in bulk packaging. Packaging selection should align with procurement and assembly requirements.

Q: Are all substitute parts RoHS compliant?

A: The Amphenol RF 172102 and TE Connectivity 1-225092-1 and 225092-1 are ROHS3 compliant. The 225092-2 has RoHS status listed as not applicable. Compliance requirements should be verified against system specifications.