TE Connectivity AMP Connectors 5225396-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 5225396-7 is a BNC Connector Jack, Female Socket rated at 50 Ohms with crimp termination for both center contact and shield. This free-hanging (in-line) connector is designed for RF coaxial applications with a maximum frequency rating of 4 GHz and operates across a temperature range of -55°C to 85°C. The connector is currently in Active product status with 751 pieces available in inventory.

Substitute parts become necessary when the primary part reaches end-of-life status, when inventory constraints occur, or when design requirements allow for alternative manufacturers that meet the same electrical and mechanical specifications. The substitute identified for this connector maintains functional equivalence across critical RF parameters while offering different packaging and extended operating temperature capabilities.

Key Parameters

Parameter	Value
Connector Style	BNC
Connector Type	Jack, Female Socket
Impedance	50 Ohms
Contact Termination	Crimp
Shield Termination	Crimp
Mounting Type	Free Hanging (In-Line)
Fastening Type	Bayonet Lock
Frequency - Max	4 GHz
Voltage Rating	500 V
Insertion Loss	0.2 dB
Mating Cycles	500
Body Material	Brass
Body Finish	Nickel
Center Contact Plating	Gold
Dielectric Material	Polytetrafluoroethylene (PTFE)

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 5225396-7 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

Connector Style: BNC (identical RF interface standard)
Connector Type: Jack, Female Socket (identical mating interface)
Impedance: 50 Ohms (identical RF characteristic impedance)
Frequency - Max: 4 GHz (minimum frequency rating requirement)
Voltage Rating: 500 V (minimum voltage rating requirement)
Insertion Loss: 0.2 dB (maximum insertion loss specification)

Mechanical Equivalence Requirements:

Contact Termination: Crimp (identical termination method)
Shield Termination: Crimp (identical termination method)
Mounting Type: Free Hanging (In-Line) (identical physical mounting configuration)
Fastening Type: Bayonet Lock (identical mating mechanism)
Body Material: Brass (identical base material)
Body Finish: Nickel (identical surface finish)
Center Contact Plating: Gold (identical contact plating)
Dielectric Material: PTFE (identical insulation material)

Compliance Requirements:

RoHS Status: RoHS Compliant or ROHS3 Compliant
REACH Status: REACH Affected
ECCN: EAR99
HTSUS: 8536.69.4010

The Amphenol RF 000-36800 meets all electrical, mechanical, and compliance requirements for direct substitution. Differences in cable group compatibility, center contact material composition, included components, and operating temperature range do not preclude substitution when the application requirements fall within the overlapping specifications.

Parameter Comparison

Parameter	TE Connectivity 5225396-7	Amphenol RF 000-36800	Match Status
Connector Style	BNC	BNC	Equivalent
Connector Type	Jack, Female Socket	Jack, Female Socket	Equivalent
Contact Termination	Crimp	Crimp	Equivalent
Shield Termination	Crimp	Crimp	Equivalent
Impedance	50 Ohms	50 Ohms	Equivalent
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Equivalent
Fastening Type	Bayonet Lock	Bayonet Lock	Equivalent
Frequency - Max	4 GHz	4 GHz	Equivalent
Number of Ports	1	1	Equivalent
Housing Color	Silver	Silver	Equivalent
Body Material	Brass	Brass	Equivalent
Body Finish	Nickel	Nickel	Equivalent
Center Contact Plating	Gold	Gold	Equivalent
Dielectric Material	Polytetrafluoroethylene (PTFE)	Polytetrafluoroethylene (PTFE)	Equivalent
Voltage Rating	500 V	500 V	Equivalent
Mating Cycles	500	500	Equivalent
Insertion Loss	0.2 dB	0.2 dB	Equivalent
RoHS Status	RoHS Compliant	ROHS3 Compliant	Compliant
REACH Status	REACH Affected	REACH Affected	Equivalent
ECCN	EAR99	EAR99	Equivalent
HTSUS	8536.69.4010	8536.69.4010	Equivalent
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	Equivalent
Operating Temperature	-55°C ~ 85°C	-65°C ~ 165°C	Overlapping Range
Center Contact Material	Beryllium Copper	Phosphor Bronze	Different Material
Packaging	Bulk	Bag	Different Packaging
Product Status	Active	Not For New Designs	Status Difference

Engineering Selection Recommendations

Primary Part Selection: The TE Connectivity AMP Connectors 5225396-7 is the recommended selection for new designs. This connector carries Active product status, indicating ongoing manufacturer support and availability. The part is RoHS Compliant and REACH Affected, meeting current environmental and regulatory requirements. With 751 pieces in current inventory, supply continuity is established.

Substitute Part Selection: The Amphenol RF 000-36800 serves as a functional equivalent for applications where the primary part becomes unavailable or when design flexibility permits alternative manufacturers. This substitute meets all critical electrical and mechanical specifications required for 50 Ohm BNC jack applications at frequencies up to 4 GHz. The part carries ROHS3 Compliant status, which supersedes earlier RoHS compliance standards.

Status Consideration: The Amphenol RF 000-36800 carries a "Not For New Designs" product status designation. This status indicates the part remains available for existing designs and legacy applications but is not recommended for incorporation into newly developed products. Selection of this substitute is appropriate for:

Replacement or repair of existing equipment
Continuation of established production runs
Applications where design freeze permits use of legacy components

Compliance Alignment: Both parts share identical export control classifications (EAR99) and tariff codes (8536.69.4010), ensuring equivalent regulatory treatment in procurement and logistics processes.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol RF 000-36800 be used as a direct replacement for the TE Connectivity 5225396-7 in existing assemblies?

A: Yes. The Amphenol RF 000-36800 meets all critical electrical and mechanical specifications for direct substitution. Both connectors are 50 Ohm BNC jacks with crimp termination, identical frequency ratings to 4 GHz, matching voltage ratings of 500 V, and equivalent insertion loss of 0.2 dB. The connectors share identical body materials, finishes, and dielectric materials.

Q: What is the significance of the "Not For New Designs" status on the Amphenol RF 000-36800?

A: This designation indicates the part is in a mature or declining lifecycle phase. The manufacturer continues to produce and support the part for existing applications but does not recommend its use in newly developed products. For new designs, the TE Connectivity 5225396-7 with Active status is the appropriate selection.

Q: Are there differences in cable compatibility between these two connectors?

A: The connectors support different cable group specifications. The TE Connectivity 5225396-7 is specified for RG-174 and RG-188 cables. The Amphenol RF 000-36800 is specified for RG-58, RG-58A, RG-58B, RG-58C, RG-141, RG-303, LMR-195, Belden B7806A, and 9907 cables. Cable compatibility must be verified for the specific application. Both connectors maintain 50 Ohm impedance matching across their respective cable groups.

Q: What is the difference in center contact material between these parts?

A: The TE Connectivity 5225396-7 uses Beryllium Copper for the center contact, while the Amphenol RF 000-36800 uses Phosphor Bronze. Both materials are gold-plated and provide equivalent electrical performance within the specified operating parameters. The material difference does not affect RF performance, voltage rating, or mating cycle specifications.

Q: How do the operating temperature ranges compare?

A: The TE Connectivity 5225396-7 operates from -55°C to 85°C. The Amphenol RF 000-36800 operates from -65°C to 165°C. The Amphenol part provides extended temperature capability in both directions. For applications operating within the -55°C to 85°C range, both connectors are functionally equivalent. Applications requiring operation outside this range require the Amphenol RF 000-36800.

Q: What packaging differences exist between these connectors?

A: The TE Connectivity 5225396-7 is supplied in Bulk packaging, while the Amphenol RF 000-36800 is supplied in Bag packaging. Both packaging formats are standard for RF connectors and do not affect connector performance or compatibility. Packaging selection may influence handling procedures and inventory management but does not impact electrical or mechanical function.

Q: Are both connectors RoHS compliant?

A: Yes. The TE Connectivity 5225396-7 carries RoHS Compliant certification. The Amphenol RF 000-36800 carries ROHS3 Compliant certification. ROHS3 represents an updated compliance standard that supersedes earlier RoHS designations. Both certifications confirm compliance with Restriction of Hazardous Substances requirements.

Q: What components are included with each connector?

A: The TE Connectivity 5225396-7 includes four pieces: 1 Connector, 1 Bushing, 1 Contact, and 1 Ferrule. The Amphenol RF 000-36800 includes three pieces: 1 Connector, 1 Contact, and 1 Ferrule. The TE Connectivity part includes an additional bushing component. Verify that included components meet assembly requirements for the specific application.

Q: Can these connectors be used interchangeably in RF systems operating at 4 GHz?

A: Yes, within the overlapping operating temperature range of -55°C to 85°C. Both connectors are rated to 4 GHz maximum frequency with 0.2 dB insertion loss. The 50 Ohm impedance, bayonet lock fastening, and crimp termination methods are identical. Interchangeability is confirmed for RF applications within these specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message