TE Connectivity 5-2176094-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5-2176094-9 is a 487 kOhms ±0.1% thin film chip resistor rated at 0.25W (1/4W) in 0805 (2012 Metric) surface mount package. This component is manufactured by TE Connectivity Passive Product under the RP73P series and maintains Active product status. The part is RoHS3 compliant with Moisture Sensitivity Level 1 (unlimited shelf life). Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory management, or specific certification requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

5-2176094-9

TE Connectivity Passive ProductIn Stock: 16685-2176094-9 Datasheet

Current PartRFQ

ERA-6AEB4873V

Panasonic Electronic ComponentsIn Stock: 3097ERA-6AEB4873V Datasheet

DirectRFQ

RT0805BRD07487KL

YAGEOIn Stock: 20860RT0805BRD07487KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 5-2176094-9 is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

• Resistance Value: 487 kOhms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Terminations: 2
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameter:

• Power Rating: The main part is rated at 0.25W (1/4W). Substitute parts rated at 0.125W (1/8W) are acceptable as they represent a lower power dissipation specification within the same package footprint and thermal characteristics.

Both identified substitute parts meet all mandatory equivalence parameters and operate within the allowable power rating variation. Physical dimensions remain identical across all three parts, ensuring PCB layout compatibility.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5-2176094-9 (Primary Part) Select this part for applications requiring 0.25W (1/4W) power dissipation capability. The higher power rating provides thermal margin in circuits with elevated resistive heating. Cut Tape packaging is suitable for lower-volume production or prototype applications.

Panasonic ERA-6AEB4873V (Substitute) This part is suitable for applications where the 0.125W (1/8W) power rating is sufficient. The Panasonic ERA-6A series includes Automotive AEC-Q200 certification, making this substitute appropriate for automotive and high-reliability applications. Tape & Reel packaging supports high-volume manufacturing. REACH Unaffected status provides additional regulatory clarity.

YAGEO RT0805BRD07487KL (Substitute) This part is suitable for applications where the 0.125W (1/8W) power rating is sufficient. The YAGEO RT series offers the highest inventory availability (20,836 pcs) among the three options, supporting rapid procurement and supply chain continuity. Tape & Reel packaging supports high-volume manufacturing. REACH Unaffected status provides additional regulatory clarity.

All three parts maintain identical electrical performance in 0805 package footprint applications. Selection between substitutes depends on power dissipation requirements, certification needs, packaging format, and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB4873V or YAGEO RT0805BRD07487KL be used as direct replacements for the TE Connectivity 5-2176094-9?

A: Both parts are electrically and mechanically compatible substitutes. The primary difference is power rating: the TE Connectivity part is rated at 0.25W while both substitutes are rated at 0.125W. If circuit design requires only 0.125W dissipation or less, either substitute is directly compatible. If the circuit requires 0.25W dissipation capability, the TE Connectivity part must be used.

Q: Are there physical compatibility concerns when substituting these parts?

A: No. All three parts use identical 0805 (2012 Metric) package footprints with matching length and width dimensions (0.079" L x 0.049" W). The substitute parts have slightly lower seated heights (0.024" vs 0.026"), which does not affect PCB assembly or clearance requirements.

Q: What is the significance of the Automotive AEC-Q200 certification on the Panasonic ERA-6AEB4873V?

A: AEC-Q200 certification indicates the part meets automotive industry reliability and performance standards. This certification is relevant only for automotive applications. For non-automotive applications, this certification provides no functional advantage.

Q: How do packaging formats differ between these parts?

A: The TE Connectivity 5-2176094-9 is supplied in Cut Tape (CT) format, suitable for small quantities and prototype work. Both substitute parts are supplied in Tape & Reel (TR) format, optimized for automated high-volume manufacturing. Tape & Reel format typically offers better pricing for large-volume orders.

Q: Are all three parts RoHS3 compliant?

A: Yes. All three parts are RoHS3 compliant and carry Moisture Sensitivity Level 1 (unlimited shelf life), meeting current environmental and regulatory requirements.

Q: What is the temperature coefficient specification and why is it important?

A: All three parts have a temperature coefficient of ±25ppm/°C, meaning resistance value changes by a maximum of 25 parts per million for each degree Celsius change in operating temperature. This specification is identical across all parts and indicates precision thin film construction suitable for applications requiring stable resistance values across the -55°C to 155°C operating range.