TE Connectivity 5-2176094-4 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5-2176094-4 is a 432 kOhms ±0.1% thin film chip resistor rated at 0.25W (1/4W) in 0805 (2012 Metric) surface mount package. This component is manufactured by TE Connectivity Passive Product under the RP73P series and maintains Active product status. The part is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1) and operates across the temperature range of -55°C to 155°C. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across alternative manufacturers while meeting the same functional requirements.

Substiute Parts

5-2176094-4

TE Connectivity Passive ProductIn Stock: 14755-2176094-4 Datasheet

Current PartRFQ

ERA-6AEB4323V

Panasonic Electronic ComponentsIn Stock: 12455ERA-6AEB4323V Datasheet

DirectRFQ

RT0805BRD07432KL

YAGEOIn Stock: 12291RT0805BRD07432KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 5-2176094-4 are qualified based on the following criteria:

Electrical Equivalence:

• Identical resistance value: 432 kOhms
• Matching tolerance: ±0.1%
• Identical temperature coefficient: ±25ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Thin film composition maintained

Mechanical Compatibility:

• Identical package designation: 0805 (2012 Metric)
• Identical footprint dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Two terminations maintained

Compliance & Regulatory:

• RoHS3 compliance required
• MSL 1 (Unlimited) maintained
• ECCN EAR99 classification maintained

Power Rating Consideration: Substitute parts with lower power ratings (0.125W / 1/8W) are functionally equivalent when the application circuit does not require the full 0.25W dissipation capacity of the main part. The 0.125W rating remains suitable for standard signal conditioning and biasing applications where power dissipation does not exceed 125mW.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5-2176094-4 (Primary Part)

Use this part when the application requires the full 0.25W power dissipation capacity. The TE Connectivity RP73P series maintains Active product status with established supply chain availability (1408 pcs in stock). This part is suitable for applications with higher power budget requirements or when thermal margin is a design consideration.

Panasonic ERA-6AEB4323V (Substitute)

This part qualifies as a direct substitute for applications where power dissipation does not exceed 0.125W. The Panasonic ERA-6A series carries AEC-Q200 automotive qualification, making it suitable for automotive and high-reliability applications. REACH Unaffected status provides additional regulatory clarity. Packaging is available in Cut Tape (CT) & Digi-Reel® format with substantial inventory (12403 pcs in stock). Height is reduced to 0.024" (0.60mm) compared to the main part.

YAGEO RT0805BRD07432KL (Substitute)

This part qualifies as a direct substitute for applications where power dissipation does not exceed 0.125W. The YAGEO RT series maintains Active product status with Tape & Reel (TR) packaging matching the main part format. REACH Unaffected status is confirmed. Inventory availability is substantial (12248 pcs in stock). Height is reduced to 0.024" (0.60mm) compared to the main part.

Both substitute parts are suitable for signal conditioning, biasing networks, and precision measurement circuits where the 0.125W power rating is adequate. Selection between substitutes depends on packaging preference (Cut Tape vs. Tape & Reel), automotive qualification requirements, and supply chain considerations.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB4323V or YAGEO RT0805BRD07432KL be used as direct replacements for the TE Connectivity 5-2176094-4?

A: Yes, both parts are direct substitutes when the application circuit power dissipation does not exceed 0.125W. All three parts share identical resistance (432 kOhms), tolerance (±0.1%), temperature coefficient (±25ppm/°C), operating temperature range (-55°C ~ 155°C), package (0805), and compliance status (RoHS3, MSL 1). The primary difference is the power rating: the TE Connectivity part is rated at 0.25W while the substitutes are rated at 0.125W.

Q: What is the impact of the lower power rating on the substitute parts?

A: The 0.125W rating of the substitute parts limits continuous power dissipation to 125mW. In applications where the resistor dissipates less than 125mW, there is no functional impact. Applications requiring sustained dissipation above 125mW must use the TE Connectivity 5-2176094-4 or equivalent 0.25W rated parts.

Q: Are the physical dimensions compatible between the main part and substitutes?

A: Yes, all three parts use the 0805 (2012 Metric) package with identical footprint dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm). The seated height of the substitute parts is slightly reduced (0.024" vs. 0.026"), which is compatible with standard PCB assembly processes and does not affect placement or soldering.

Q: What is the difference between Cut Tape (CT) & Digi-Reel® and Tape & Reel (TR) packaging?

A: Cut Tape (CT) & Digi-Reel® packaging (Panasonic ERA-6AEB4323V) is supplied in cut tape format suitable for manual or small-scale assembly. Tape & Reel (TR) packaging (TE Connectivity 5-2176094-4 and YAGEO RT0805BRD07432KL) is supplied on continuous reel format optimized for automated pick-and-place assembly. Selection depends on production volume and assembly equipment capabilities.

Q: Does the Panasonic ERA-6AEB4323V AEC-Q200 qualification provide additional benefits?

A: AEC-Q200 qualification indicates the part meets automotive industry reliability standards. This qualification is relevant for automotive applications and high-reliability environments. For non-automotive applications, this qualification provides no functional advantage but confirms additional testing and quality assurance.

Q: Are there any temperature or environmental differences between the parts?

A: All three parts operate across the identical temperature range of -55°C ~ 155°C with identical temperature coefficient of ±25ppm/°C. All parts maintain MSL 1 (Unlimited) moisture sensitivity level, indicating no special moisture protection requirements during storage or handling.

Q: What is the significance of REACH Unaffected status for the substitute parts?

A: REACH Unaffected status (Panasonic and YAGEO parts) indicates the parts are not subject to REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) regulatory requirements. The TE Connectivity part lists REACH status as Vendor Undefined. For applications in regulated markets, the substitute parts provide clearer regulatory documentation.