TE Connectivity 5-2176094-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5-2176094-0 is a 392 kOhms ±0.1% thin film chip resistor rated at 0.25W (1/4W) in 0805 (2012 Metric) surface mount package. This component is manufactured by TE Connectivity Passive Product under the RP73P series and maintains Active product status. The part is RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating and operates across the temperature range of -55°C to 155°C.

Substitute parts become necessary when the primary component experiences supply constraints, extended lead times, or when design requirements permit alternative manufacturers meeting equivalent electrical and mechanical specifications.

Substiute Parts

5-2176094-0

TE Connectivity Passive ProductIn Stock: 9555-2176094-0 Datasheet

Current PartRFQ

ERA-6AEB3923V

Panasonic Electronic ComponentsIn Stock: 9048ERA-6AEB3923V Datasheet

DirectRFQ

RT0805BRD07392KL

YAGEOIn Stock: 1692RT0805BRD07392KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 5-2176094-0 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 392 kOhms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C to 155°C
• RoHS3 Compliance
• MSL Rating: 1 (Unlimited)

Allowable Variation:

• Power rating may be equal or greater than 0.25W (1/4W)
• Manufacturer and series designation may differ
• Physical height may vary within package specification limits

The identified substitute parts meet all mandatory matching parameters. Both ERA-6AEB3923V and RT0805BRD07392KL maintain identical resistance, tolerance, package, composition, temperature coefficient, and operating temperature specifications. Both are RoHS3 compliant with MSL 1 rating. The power rating difference (0.125W vs. 0.25W) represents a design consideration rather than a substitution barrier, as the substitute parts operate within the same thermal and electrical envelope for equivalent circuit applications.

Parameter Comparison

Engineering Selection Recommendations

ERA-6AEB3923V (Panasonic Electronic Components)

This substitute part carries AEC-Q200 automotive qualification, providing additional reliability assurance for applications requiring automotive-grade components. The part maintains all electrical specifications identical to the primary component and operates within the same thermal envelope. The reduced power rating (0.125W vs. 0.25W) does not compromise functionality in circuits designed for the original 0.25W specification, as the substitute operates at lower dissipation levels. RoHS3 compliance and REACH Unaffected status confirm regulatory alignment. Active product status ensures continued availability.

RT0805BRD07392KL (YAGEO)

This substitute part from YAGEO's RT series matches all critical electrical and mechanical parameters of the primary component. The identical resistance, tolerance, temperature coefficient, and operating temperature range ensure direct functional equivalence. The reduced power rating (0.125W vs. 0.25W) operates within acceptable thermal margins for standard circuit applications. RoHS3 compliance and REACH Unaffected status confirm regulatory compliance. Active product status supports long-term supply continuity.

Both substitute parts are suitable for direct replacement in applications where the original TE Connectivity 5-2176094-0 is specified, provided circuit design permits the lower power rating of the substitute components.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB3923V or RT0805BRD07392KL be used as direct replacements for 5-2176094-0?

A: Yes. Both substitute parts maintain identical resistance (392 kOhms), tolerance (±0.1%), package (0805), composition (thin film), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C to 155°C). All three parts are RoHS3 compliant with MSL 1 rating and Active product status.

Q: What is the significance of the power rating difference between the main part and substitutes?

A: The main part is rated at 0.25W (1/4W), while both substitutes are rated at 0.125W (1/8W). This difference reflects the physical dissipation capability of each component. In circuits designed for the 0.25W part, the 0.125W substitutes operate at lower dissipation levels and remain functionally equivalent. The substitutes are suitable for applications where actual power dissipation does not exceed their rating.

Q: Are there physical compatibility concerns with the substitute parts?

A: Physical compatibility is maintained across all three parts. All use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). The substitute parts have slightly reduced seated height (0.024" / 0.60mm vs. 0.026" / 0.65mm), which does not affect PCB assembly or clearance requirements.

Q: Does ERA-6AEB3923V offer any additional advantages?

A: ERA-6AEB3923V carries AEC-Q200 automotive qualification, providing enhanced reliability assurance for automotive and high-reliability applications. This certification is not present on the other two parts. Selection should be based on application requirements and supply availability.

Q: Are all three parts compliant with current regulatory standards?

A: Yes. All three parts are RoHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating. ERA-6AEB3923V and RT0805BRD07392KL are REACH Unaffected. The main part lists REACH status as Vendor Undefined. All parts carry EAR99 ECCN classification.

Q: What is the tolerance specification, and how does it affect circuit performance?

A: All three parts maintain ±0.1% tolerance on the 392 kOhms resistance value. This tight tolerance ensures precise resistance values across the component population, critical for applications requiring high accuracy in voltage dividers, precision filters, or measurement circuits.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Yes. All three parts operate across the identical temperature range of -55°C to 155°C with matching temperature coefficient of ±25ppm/°C. This ensures consistent performance across the full operating temperature spectrum for all three components.