Amphenol ICC 51915-014 Backplane Connector Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 51915-014 is a 31-position receptacle connector featuring female sockets and blade sockets for board edge, through-hole, right-angle mounting. This connector is part of the PwrBlade® series and provides a contact layout of 24 signal and 7 power positions with gold-plated contacts and board lock features.

The 51915-014 carries an obsolete product status. Locating equivalent and substitute parts is necessary to support ongoing maintenance, repair, and replacement requirements for systems utilizing this connector configuration.

Substiute Parts

51915-014

Amphenol ICC (FCI)In Stock: 123151915-014 Datasheet

Current PartRFQ

51915-014LF

Amphenol ICC (FCI)In Stock: 86851915-014LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 51915-014 is determined by strict equivalence across the following critical parameters:

• Connector type: Receptacle with female sockets and blade sockets
• Position count: 31 positions
• Pitch: 0.100" (2.54mm)
• Row configuration: 4 rows
• Mounting method: Board edge, through-hole, right-angle orientation
• Termination method: Solder
• Contact layout: 24 signal, 7 power
• Contact finish specification: Gold or Gold, GXT™
• Contact finish thickness: 30.0µin (0.76µm)
• Color: Black
• Flammability rating: UL94 V-0
• Operating temperature range: -20°C ~ 105°C
• Features: Board lock and guide pin

Only parts matching all these parameters qualify as direct substitutes for the 51915-014.

Parameter Comparison

Engineering Selection Recommendations

The 51915-014LF serves as the direct substitute for the obsolete 51915-014. Both parts are electrically and mechanically equivalent across all specified parameters. The primary distinction is product status and compliance posture.

The 51915-014LF is an active product with RoHS compliance and REACH applicability, making it the appropriate selection for new designs and ongoing production requirements. The 51915-014 is obsolete and non-compliant with RoHS regulations.

For applications requiring the 31-position PwrBlade® receptacle configuration with the specified electrical and mechanical characteristics, the 51915-014LF is the current production equivalent.

Frequently Asked Questions (FAQ)

Q: Can the 51915-014LF directly replace the 51915-014 in existing assemblies?

A: Yes. The 51915-014LF is electrically and mechanically equivalent to the 51915-014 across all specified parameters, including connector type, position count, pitch, mounting configuration, contact layout, finish specifications, and operating temperature range.

Q: What is the primary difference between these two parts?

A: The 51915-014 is obsolete and RoHS non-compliant, while the 51915-014LF is an active product with RoHS compliance and REACH applicability. Both parts are functionally identical in electrical and mechanical performance.

Q: Does packaging differ between these parts?

A: Yes. The 51915-014LF is supplied in tray packaging. The packaging specification for the 51915-014 was not provided in the technical data.

Q: Are there any compatibility concerns when substituting the 51915-014LF for the 51915-014?

A: No compatibility concerns exist. The parts are direct equivalents with identical electrical and mechanical specifications, contact configurations, and operating parameters.

Q: Which part should be specified for new designs?

A: The 51915-014LF should be specified for new designs and production applications due to its active product status and RoHS compliance.