TE Connectivity 5188733-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5188733-1 is a 110-position header connector with male pins, designed for backplane applications. This connector features a 2.00mm (0.079") pitch, press-fit termination, and through-hole mounting. The part is currently active in production with 797 units in stock.

Equivalent and substitute parts are identified based on matching electrical and mechanical specifications including connector position count, pitch, mounting type, termination method, and operating parameters. Alternative sources provide equivalent functionality for applications requiring this connector type.

Substiute Parts

5188733-1

TE Connectivity AMP ConnectorsIn Stock: 9005188733-1 Datasheet

Current PartRFQ

17011101201

HARTINGIn Stock: 102317011101201 Datasheet

SimilarRFQ

17011102204

HARTINGIn Stock: 105717011102204 Datasheet

SimilarRFQ

HM2H07P115LF

Amphenol ICC (FCI)In Stock: 807HM2H07P115LF Datasheet

SimilarRFQ

HM2P07PA5110AALF

Amphenol ICC (FCI)In Stock: 1362HM2P07PA5110AALF Datasheet

SimilarRFQ

HM2P07PA5111AALF

Amphenol ICC (FCI)In Stock: 1221HM2P07PA5111AALF Datasheet

SimilarRFQ

HM2P07PD5110N9LF

Amphenol ICC (FCI)In Stock: 1844HM2P07PD5110N9LF Datasheet

SimilarRFQ

HM2P07PD5111N9LF

Amphenol ICC (FCI)In Stock: 1758HM2P07PD5111N9LF Datasheet

SimilarRFQ

HM2P07PD51M0N9LF

Amphenol ICC (FCI)In Stock: 845HM2P07PD51M0N9LF Datasheet

SimilarRFQ

HM2P07PDE120N9LF

Amphenol ICC (FCI)In Stock: 1218HM2P07PDE120N9LF Datasheet

SimilarRFQ

HM2P07PDG3W0N9L1LF

Amphenol ICC (FCI)In Stock: 1189HM2P07PDG3W0N9L1LF Datasheet

SimilarRFQ

HM2P07PDL3E0N9LF

Amphenol ICC (FCI)In Stock: 1191HM2P07PDL3E0N9LF Datasheet

SimilarRFQ

PCN21B-110PB-2PF-G

Hirose Electric Co LtdIn Stock: 1154PCN21B-110PB-2PF-G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are grouped into two categories based on electrical and mechanical compatibility:

Category 1: Direct Electrical Equivalents (110-Position, 5-Row Configuration)

These parts match the primary electrical and mechanical specifications of the 5188733-1:

• Number of Positions: 110
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5
• Connector Type: Header, Male Pins
• Mounting Type: Through Hole
• Termination: Press-Fit
• Operating Temperature: -55°C ~ 125°C

Parts in this category: HM2P07PA5110AALF, HM2P07PD5110N9LF, HM2P07PD51M0N9LF, HM2P07PDE120N9LF, HM2P07PDG3W0N9L1LF, 17011101201, 17011102204

Category 2: Extended Position Configuration (154-Position, 5+2 Row Configuration)

These parts provide increased position count with additional ground rows:

• Number of Positions: 154 (110 + 44 Ground)
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5 + 2
• Connector Type: Header, Male Pins
• Mounting Type: Through Hole
• Termination: Press-Fit
• Operating Temperature: -55°C ~ 125°C

Parts in this category: HM2P07PA5111AALF, HM2P07PD5111N9LF

Category 3: Shroud Component (Accessory)

This part is a shroud assembly for hard metric connectors and is not a direct substitute but a complementary component:

• Part: HM2H07P115LF (Obsolete status)

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (110-Position, 5-Row Configuration)

The following parts provide direct electrical and mechanical equivalence to the 5188733-1:

Amphenol ICC (FCI) Millipacs® Series:

• HM2P07PA5110AALF, HM2P07PD5110N9LF, HM2P07PD51M0N9LF, HM2P07PDE120N9LF, HM2P07PDG3W0N9L1LF

These parts maintain the 110-position, 5-row configuration with 2.00mm pitch and press-fit termination. All are active products with RoHS compliance. Voltage rating is 750Vrms, exceeding the 500Vrms specification of the 5188733-1. Current rating is 1.5A, matching the original part.

HARTING har-bus® HM Series:

• 17011101201, 17011102204

These parts match the 110-position, 5-row configuration with 2.00mm pitch and press-fit termination. Both are active products with ROHS3 compliance. Current rating is 1.0A, which is lower than the 5188733-1 specification of 1.5A. Voltage rating is not specified in available data.

For Extended Position Applications (154-Position, 5+2 Row Configuration)

The following parts provide increased position count with additional ground rows:

Amphenol ICC (FCI) Millipacs® Series:

• HM2P07PA5111AALF, HM2P07PD5111N9LF

These parts feature 154 total positions (110 signal + 44 ground) in a 5+2 row configuration with 2.00mm pitch and press-fit termination. Both are active products with RoHS compliance. Voltage rating is 750Vrms and current rating is 1.5A.

For Shroud Applications (Accessory Component)

• HM2H07P115LF (Obsolete)

This part is a shroud assembly for hard metric connectors and is not a direct substitute for the header connector. It is listed as obsolete and is a complementary component only.

Frequently Asked Questions (FAQ)

Q: Can HARTING 17011101201 or 17011102204 be used as a direct replacement for 5188733-1?

A: These parts match the mechanical configuration (110 positions, 5 rows, 2.00mm pitch, press-fit termination, through-hole mounting) and operating temperature range (-55°C to 125°C). However, the current rating is 1.0A compared to 1.5A for the 5188733-1. Selection depends on application current requirements. Both are active products with current compliance certifications.

Q: What is the difference between the 110-position and 154-position variants?

A: The 110-position variants (5-row configuration) provide signal contacts only. The 154-position variants (5+2 row configuration) include 110 signal positions plus 44 additional ground positions distributed across two additional rows. Selection depends on grounding architecture requirements.

Q: Are all Amphenol ICC (FCI) Millipacs® substitutes electrically equivalent?

A: All Amphenol ICC (FCI) 110-position variants (HM2P07PA5110AALF, HM2P07PD5110N9LF, HM2P07PD51M0N9LF, HM2P07PDE120N9LF, HM2P07PDG3W0N9L1LF) share the same electrical specifications: 110 positions, 1.5A current rating, 750Vrms voltage rating, and -55°C to 125°C operating temperature. Differences exist in contact finish thickness specifications (30.0µin or Flash finish). All are active products with RoHS compliance.

Q: What does "Press-Fit" termination mean?

A: Press-fit termination is a connection method where contacts are mechanically pressed into plated through-holes on a printed circuit board without solder. This method is used in all listed substitute parts and the original 5188733-1.

Q: Is the HM2H07P115LF shroud compatible with the header connectors?

A: The HM2H07P115LF is a shroud assembly for hard metric connectors with 110 positions in a 5+2 row configuration. It is listed as an obsolete product and serves as a protective housing component, not as a header connector substitute. Compatibility depends on specific connector mating requirements.

Q: What is the significance of the contact finish specifications?

A: Contact finish affects durability and electrical performance. The 5188733-1 specifies 30.0µin (0.76µm) gold finish. Amphenol ICC (FCI) variants offer either 30.0µin gold or flash gold finish. HARTING parts specify gold or gold-palladium finish. All finishes provide corrosion resistance and electrical conductivity suitable for backplane applications.

Q: Are all substitute parts RoHS compliant?

A: Yes. The 5188733-1 is RoHS Compliant. All Amphenol ICC (FCI) substitutes are RoHS Compliant. HARTING substitutes are ROHS3 Compliant. All parts meet current regulatory requirements for hazardous substance restrictions.

Q: What packaging options are available?

A: The 5188733-1 is supplied in Tube packaging. Amphenol ICC (FCI) substitutes are supplied in Tray packaging. HARTING substitutes are supplied in Tube packaging. Packaging selection may affect handling, storage, and ordering quantities.