Amphenol ICC PwrBlade® 51882-001 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 51882-001 is a 26-position backplane connector header featuring male pins and blades for board edge, through-hole, right-angle mounting. This connector is part of the PwrBlade® series and provides 24 signal and 2 power contacts with a 0.100" (2.54mm) pitch across 4 rows. The part is currently listed as obsolete, making identification of equivalent and substitute components essential for ongoing system support and new design implementations.

Substiute Parts

51882-001

Amphenol ICC (FCI)In Stock: 105551882-001 Datasheet

Current PartRFQ

51882-001LF

Amphenol ICC (FCI)In Stock: 89351882-001LF Datasheet

DirectRFQ

51415-001LF

Amphenol ICC (FCI)In Stock: 153251415-001LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 51882-001 are identified based on electrical and mechanical parameter equivalence within the PwrBlade® connector family. The following parameters determine substitution eligibility:

• Connector type (Header, Male Pins and Blades)
• Number of positions (26)
• Pitch spacing (0.100" / 2.54mm)
• Number of rows (4)
• Mounting configuration (Board Edge, Through Hole, Right Angle)
• Contact layout (24 Signal, 2 Power)
• Termination method (Solder)
• Operating temperature range (-20°C ~ 105°C)
• Material flammability rating (UL94 V-0)

Parts meeting all these criteria are functionally equivalent for connector interface applications.

Parameter Comparison

Engineering Selection Recommendations

The 51882-001 is obsolete and should be replaced with an active equivalent for new designs and ongoing production support. Both substitute parts—51882-001LF and 51415-001LF—meet all electrical and mechanical parameter requirements for direct substitution.

51882-001LF is the direct variant of the main part number with RoHS compliance and active product status. This part maintains the same base product number (51882) and is the primary choice for applications requiring minimal design changes.

51415-001LF is the manufacturer-recommended alternative, also offering RoHS compliance and active status. This part uses a different base product number (51415) but maintains full electrical and mechanical compatibility through identical connector specifications.

Both substitute parts are available in tray packaging and carry REACH compliance status, meeting current regulatory requirements for electronic components.

Frequently Asked Questions (FAQ)

Q: Can 51882-001LF directly replace 51882-001 in existing designs?

A: Yes. The 51882-001LF maintains identical electrical and mechanical parameters, including connector type, position count, pitch, mounting configuration, and contact layout. The primary difference is active product status and RoHS compliance.

Q: What is the difference between 51882-001LF and 51415-001LF?

A: Both parts are electrically and mechanically equivalent with identical connector specifications. The difference lies in the base product number (51882 versus 51415). Both are active, RoHS-compliant alternatives suitable for substitution.

Q: Why is the original 51882-001 listed as obsolete?

A: The 51882-001 is non-RoHS compliant. Amphenol ICC has transitioned this product line to RoHS-compliant variants (51882-001LF and 51415-001LF) to meet current regulatory standards.

Q: Are there packaging differences between the substitute parts?

A: Both 51882-001LF and 51415-001LF are supplied in tray packaging. The original 51882-001 packaging specification was not provided in the technical data.

Q: Do the substitute parts support the same operating temperature range?

A: Yes. Both 51882-001LF and 51415-001LF operate across the same temperature range of -20°C to 105°C as the original part.

Q: Are there any compliance differences between the substitutes?

A: Both substitute parts are RoHS compliant and REACH affected. The original 51882-001 is RoHS non-compliant, making the substitutes necessary for regulatory compliance in current applications.