TE Connectivity 51692-1 N Type Coaxial Connector Plug Equivalent & Substitute Parts

Part Overview

The TE Connectivity Aerospace, Defense and Marine 51692-1 is an N Type Connector Plug with male pin configuration, designed for 50 Ohm RF applications. This coaxial connector features crimp termination for both center contact and shield, supporting frequencies up to 11 GHz with a threaded fastening mechanism. The part is classified as Active product status with full RoHS3 compliance and REACH affected designation. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, supply chain considerations, or application-specific requirements within the same connector category.

Substiute Parts

51692-1

TE Connectivity Aerospace, Defense and MarineIn Stock: 123151692-1 Datasheet

Current PartRFQ

11_N-50-7-44/133_NE

Huber+Suhner, Inc.In Stock: 108411_N-50-7-44/133_NE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 51692-1 with the Huber+Suhner 11_N-50-7-44/133_NE is based on strict equivalence of the following critical parameters:

Electrical Equivalence:

• Connector Style: N Type (identical)
• Connector Type: Plug, Male Pin (identical)
• Impedance: 50 Ohms (identical)
• Frequency - Max: 11 GHz (identical)
• Voltage Rating: 1000 V (identical)

Mechanical Equivalence:

• Contact Termination: Crimp (identical)
• Shield Termination: Crimp (identical)
• Mounting Type: Free Hanging (In-Line) (identical)
• Cable Group: RG-214 (identical)
• Fastening Type: Threaded (identical)
• Number of Ports: 1 (identical)
• Mating Cycles: 500 (identical)

Environmental Equivalence:

• Operating Temperature Range: -65°C ~ 165°C (identical)

Both parts maintain full compliance with RoHS3 and EAR99 ECCN classifications, supporting direct substitution in equivalent RF coaxial connector applications.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 51692-1 and Huber+Suhner 11_N-50-7-44/133_NE maintain Active product status with full RoHS3 compliance and EAR99 export classification. Selection between these parts is determined by availability and supply chain requirements rather than technical performance differences.

The TE Connectivity 51692-1 is currently available with 1122 pieces in stock inventory. The Huber+Suhner 11_N-50-7-44/133_NE is available with 1032 pieces in stock inventory.

Both parts satisfy identical electrical, mechanical, and environmental specifications for N Type 50 Ohm RF coaxial connector applications. The primary distinction is the body finish specification: TE Connectivity uses Silver finish while Huber+Suhner uses White Bronze finish. Both finishes are compatible with the specified operating temperature range and voltage rating.

Frequently Asked Questions (FAQ)

Q: Can the Huber+Suhner 11_N-50-7-44/133_NE directly replace the TE Connectivity 51692-1 in existing designs?

A: Yes. Both connectors are N Type Plug male pin configurations with identical 50 Ohm impedance, crimp termination, RG-214 cable group compatibility, threaded fastening, and 11 GHz frequency rating. Electrical and mechanical parameters are equivalent.

Q: Are there differences in the dielectric material between these parts?

A: The TE Connectivity 51692-1 uses Polytetrafluoroethylene (PTFE) dielectric material. The Huber+Suhner 11_N-50-7-44/133_NE uses both Perfluoroalkoxy (PFA) and Polytetrafluoroethylene (PTFE) dielectric materials. Both materials support the specified operating temperature range of -65°C to 165°C and 1000 V voltage rating.

Q: What is the difference in body finish between these connectors?

A: The TE Connectivity 51692-1 features a Silver body finish. The Huber+Suhner 11_N-50-7-44/133_NE features a White Bronze body finish. Both finishes are compatible with the specified environmental and electrical operating conditions.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the TE Connectivity 51692-1 and Huber+Suhner 11_N-50-7-44/133_NE are ROHS3 compliant and carry EAR99 ECCN classification with identical HTSUS code 8536.69.4010.

Q: What is the difference in REACH status between these parts?

A: The TE Connectivity 51692-1 is classified as REACH Affected. The Huber+Suhner 11_N-50-7-44/133_NE is classified as REACH Unaffected. Regulatory requirements may vary by application and jurisdiction.

Q: Do both connectors support the same mating cycle rating?

A: Yes. Both parts are rated for 500 mating cycles, indicating equivalent mechanical durability and connector life expectancy.

Q: What cable types are compatible with these connectors?

A: Both connectors are specified for RG-214 cable group compatibility with crimp termination for center contact and shield.