TE Connectivity 5-1676274-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5-1676274-5 is a 27 kOhms ±0.1% thin film chip resistor rated at 0.1W (1/10W) in 0805 (2012 Metric) surface mount package. This component is classified as Active product status and is suitable for precision analog circuits requiring tight tolerance specifications. Equivalent and substitute parts are identified to provide design flexibility, supply chain alternatives, and performance optimization options while maintaining electrical and mechanical compatibility within the 0805 package form factor.

Substiute Parts

5-1676274-5

TE Connectivity Passive ProductIn Stock: 10885-1676274-5 Datasheet

Current PartRFQ

ERA-6ARB273V

Panasonic Electronic ComponentsIn Stock: 6837ERA-6ARB273V Datasheet

UpgradeRFQ

ERA-6ARW273V

Panasonic Electronic ComponentsIn Stock: 3352ERA-6ARW273V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 5-1676274-5 is determined by the following critical parameters:

Mandatory Compatibility Criteria:

• Resistance value: 27 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±10ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

Allowable Variation Parameters:

• Tolerance: ±0.1% or tighter (±0.05% acceptable as upgrade)
• Power Rating: 0.1W or higher (0.125W acceptable as upgrade)

The identified substitute parts meet all mandatory compatibility criteria. The Panasonic ERA-6ARB273V and ERA-6ARW273V both provide equal or superior electrical performance through higher power ratings and tighter tolerance specifications, while maintaining identical package dimensions and thermal characteristics.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5-1676274-5 (Original Part)

Select this part when the original design specification requires the RN73 series from the Holsworthy manufacturing facility or when bulk packaging is required. This part maintains Active product status and is suitable for general precision analog applications.

Panasonic ERA-6ARB273V (Equivalent Substitute)

This part provides direct electrical equivalence with identical tolerance (±0.1%) and temperature coefficient (±10ppm/°C). The ERA-6ARB273V offers increased power rating (0.125W vs. 0.1W) and includes Automotive AEC-Q200 qualification. This part is suitable for applications requiring automotive-grade reliability or when higher power dissipation margin is beneficial. Tape & Reel packaging is standard. RoHS3 compliance and REACH Unaffected status are confirmed.

Panasonic ERA-6ARW273V (Enhanced Substitute)

This part provides superior tolerance specification (±0.05% vs. ±0.1%) with identical temperature coefficient and increased power rating (0.125W vs. 0.1W). The ERA-6ARW273V includes Automotive AEC-Q200 qualification and is suitable for precision applications requiring tighter tolerance control. Tape & Reel packaging is standard. RoHS3 compliance and REACH Unaffected status are confirmed.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6ARB273V be used as a direct replacement for the TE Connectivity 5-1676274-5?

A: Yes. Both parts share identical resistance (27 kOhms), tolerance (±0.1%), package (0805), composition (thin film), temperature coefficient (±10ppm/°C), and operating temperature range (-55°C ~ 155°C). The ERA-6ARB273V provides higher power rating (0.125W vs. 0.1W), which is compatible with the original design requirements.

Q: What is the difference between the ERA-6ARB273V and ERA-6ARW273V?

A: The primary difference is tolerance specification. The ERA-6ARB273V maintains ±0.1% tolerance matching the original part, while the ERA-6ARW273V provides tighter ±0.05% tolerance. Both share identical power rating (0.125W), package dimensions, and thermal characteristics. The ERA-6ARW273V is selected when enhanced precision is required.

Q: Are the Panasonic substitutes suitable for automotive applications?

A: Yes. Both Panasonic ERA-6ARB273V and ERA-6ARW273V carry Automotive AEC-Q200 qualification, making them suitable for automotive-grade applications. The original TE Connectivity part does not carry this certification.

Q: Do the substitute parts fit the same PCB footprint?

A: Yes. All three parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). The Panasonic parts have slightly lower maximum seated height (0.024" / 0.60mm vs. 0.026" / 0.65mm), which is compatible with standard 0805 PCB layouts.

Q: What is the packaging difference between the original and substitute parts?

A: The TE Connectivity 5-1676274-5 is supplied in bulk packaging. The Panasonic ERA-6ARB273V and ERA-6ARW273V are supplied in Tape & Reel (TR) format, which is standard for automated assembly processes.

Q: Are there any compliance or certification differences?

A: The Panasonic substitutes carry RoHS3 compliance and REACH Unaffected status. The original TE Connectivity part lists RoHS Status as Not applicable and REACH Status as Vendor Undefined. All three parts share identical ECCN (EAR99) and HTSUS (8533.21.0030) classifications.

Q: Can the ERA-6ARW273V be used in place of the ERA-6ARB273V?

A: Yes. The ERA-6ARW273V provides tighter tolerance (±0.05% vs. ±0.1%) while maintaining all other electrical and mechanical parameters. This represents an upgrade in precision capability with no compatibility issues.