Pomona Electronics 5167-02 Banana Jack Connector - Equivalent & Substitute Parts

Part Overview

The Pomona Electronics 5167-02 is a standard banana jack connector designed for general-purpose electrical connections in test, measurement, and laboratory applications. This connector features a black and red color-coded design for polarity identification and supports both crimp and solder termination methods. The part is actively stocked with 1030 units available as new original inventory. Substitute parts are identified based on matching electrical and mechanical specifications within the Pomona 5167 series, allowing for component interchangeability when color or specific termination requirements differ.

Substiute Parts

5167-02

Pomona ElectronicsIn Stock: 10855167-02 Datasheet

Current PartRFQ

5167-0

Pomona ElectronicsIn Stock: 11575167-0 Datasheet

SimilarRFQ

5167-2

Pomona ElectronicsIn Stock: 13815167-2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5167-02 are identified from the Pomona 5167 base product family. Substitution is valid when the following core parameters remain constant:

• Type: Banana Jack
• Gender: Female
• Plug/Mating Plug Diameter: Standard Banana
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp or Solder
• Insulation: Sheathed
• Wire Gauge: 18-22 AWG
• Contact Finish: Nickel
• Contact Material: Brass
• Body Material: Polyvinyl Chloride (PVC)
• Operating Temperature: 50°C
• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

The primary variable among substitute parts is color designation. The 5167-02 combines black and red in a single assembly, while individual substitute parts (5167-0 and 5167-2) provide single-color options. Selection depends on application requirements for color-coded polarity identification.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and full compliance with ROHS3 and REACH regulations. The 5167-0 (black) and 5167-2 (red) connectors are electrically and mechanically equivalent to the 5167-02 across all specified parameters. Selection between these options is determined by application requirements for color-coded polarity identification and inventory availability. The 5167-2 (red) currently maintains the highest inventory level at 1299 units, followed by 5167-0 (black) at 1146 units.

Frequently Asked Questions (FAQ)

Q: Can the 5167-0 and 5167-2 be used interchangeably with the 5167-02?

A: The 5167-0 and 5167-2 are electrically and mechanically equivalent to the 5167-02 across all specified parameters including contact material, termination method, wire gauge, and operating temperature. The primary difference is color designation. The 5167-02 provides both black and red in a single assembly, while 5167-0 and 5167-2 are single-color options. Selection depends on whether your application requires color-coded polarity identification.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is valid when the following parameters remain constant: connector type (Banana Jack), gender (Female), mating plug diameter (Standard Banana), mounting type (Free Hanging In-Line), termination method (Crimp or Solder), insulation type (Sheathed), wire gauge (18-22 AWG), contact finish (Nickel), contact material (Brass), body material (PVC), operating temperature (50°C), and regulatory compliance (ROHS3 Compliant, REACH Unaffected).

Q: Are there packaging differences between the main part and substitute parts?

A: The 5167-02 is supplied in standard packaging, while both 5167-0 and 5167-2 are supplied in bulk packaging. This distinction affects ordering and inventory management but does not impact electrical or mechanical compatibility.

Q: Do all parts support both crimp and solder termination?

A: Yes. The 5167-02, 5167-0, and 5167-2 all support both crimp and solder termination methods, providing flexibility in assembly and integration approaches.

Q: What is the operating temperature range for these connectors?

A: The operating temperature specification for all listed parts is 50°C. This parameter is consistent across the 5167-02 and all substitute parts.