TE Connectivity 5-1634552-1 F Type Coaxial Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5-1634552-1 is an F Type Connector Jack with female socket configuration, designed for 75 Ohm RF applications. This component features right-angle panel mount through-hole solder termination with bulkhead front-side nut fastening. The part is classified as obsolete, necessitating identification of equivalent substitute components for ongoing design requirements and procurement needs. Substitute parts maintain functional compatibility through matching electrical and mechanical specifications while offering alternative availability and product status options.

Substiute Parts

5-1634552-1

TE Connectivity AMP ConnectorsIn Stock: 12045-1634552-1 Datasheet

Current PartRFQ

5-1634540-1

TE Connectivity AMP ConnectorsIn Stock: 8385-1634540-1 Datasheet

Parametric EquivalentRFQ

5887078-1

TE Connectivity AMP ConnectorsIn Stock: 12325887078-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 5-1634552-1 are qualified based on the following critical parameters that determine functional interchangeability:

Electrical Parameters:

• Impedance: 75 Ohms (exact match required)
• Frequency - Max: 1 GHz (exact match required)
• Voltage Rating: 500 V (exact match required)

Mechanical Parameters:

• Connector Style: F Type (exact match required)
• Connector Type: Jack, Female Socket (exact match required)
• Mounting Type: Panel Mount, Through Hole, Right Angle (exact match required)
• Mounting Feature: Bulkhead - Front Side Nut (exact match required)
• Contact Termination: Solder (exact match required)
• Shield Termination: Solder (exact match required)

Environmental Parameters:

• Operating Temperature: -65°C ~ 85°C (exact match required)

All identified substitute parts meet these critical parameters. Variations in body material composition, dielectric material type, and series designation do not affect functional compatibility within the specified electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 5887078-1

The 5887078-1 is the recommended substitute for new designs and procurement. This part maintains all critical electrical and mechanical parameters identical to the 5-1634552-1 while offering active product status. Active status ensures ongoing manufacturer support, consistent supply chain availability, and compliance with current manufacturing standards. The 5887078-1 carries RoHS Compliant certification and MSL 1 rating, matching the original part's environmental compliance profile. The substitution of body material from Zinc Alloy to Brass and dielectric material from Polymethylpentene (PMP) to Polypropylene (PP) does not affect functional performance within the specified electrical and mechanical operating parameters.

Secondary Substitute: 5-1634540-1

The 5-1634540-1 provides an alternative substitute with identical electrical and mechanical specifications to the 5-1634552-1. This part maintains the same series designation (ZDC, Greenpar) and material composition as the original. However, the 5-1634540-1 retains obsolete product status, limiting its suitability for long-term procurement strategies. This part is suitable for direct replacement in existing applications where inventory availability is confirmed.

Both substitute parts are RoHS Compliant and carry identical ECCN (EAR99) and HTSUS (8536.69.4010) classifications, ensuring regulatory consistency with the original component.

Frequently Asked Questions (FAQ)

Q: Can the 5887078-1 be used as a direct replacement for the 5-1634552-1?

A: Yes. The 5887078-1 meets all critical electrical and mechanical specifications required for functional compatibility. The differences in body material (Brass vs. Zinc Alloy) and dielectric material (Polypropylene vs. Polymethylpentene) do not affect performance within the specified operating parameters of 75 Ohm impedance, 1 GHz maximum frequency, and -65°C to 85°C operating temperature range.

Q: What is the primary advantage of selecting 5887078-1 over 5-1634540-1?

A: The 5887078-1 carries active product status, ensuring ongoing manufacturer support and consistent availability. The 5-1634540-1 is classified as obsolete, which may result in limited supply and eventual discontinuation. For new designs and long-term applications, the active status of 5887078-1 provides superior supply chain reliability.

Q: Are all three parts RoHS Compliant?

A: Yes. The 5-1634552-1, 5-1634540-1, and 5887078-1 are all RoHS Compliant with MSL 1 (Unlimited) moisture sensitivity ratings.

Q: Do the substitute parts have the same solder termination specifications?

A: Yes. All three parts feature identical solder contact termination and solder shield termination, maintaining compatibility with existing PCB assembly processes and through-hole mounting requirements.

Q: What is the impedance specification for all substitute parts?

A: All parts maintain 75 Ohm impedance, which is the standard specification for F Type connectors in this product category and is required for RF signal integrity in coaxial applications.

Q: Are there packaging differences between the substitute parts?

A: The 5-1634552-1 is supplied in Bulk packaging. Packaging information for 5-1634540-1 and 5887078-1 is not specified in the available data. Confirm packaging requirements with the supplier for procurement planning.

Q: What is the maximum operating frequency for these connectors?

A: All three parts are rated for a maximum frequency of 1 GHz, suitable for standard RF and video signal transmission applications.

Q: Do all parts meet the same voltage rating?

A: Yes. All three parts carry a 500 V voltage rating, ensuring compatibility in applications requiring this electrical specification.